Behringer srl products

 Medium/high flow rate control panel for medicinal gases, available both with automatic change-over and manual reset and fully automatic; both versions are available with pressure switch; consisting of two double reduction lines, it guarantees continuous supply with high pressure stability; complete with manifolf exaust valve; the outlet connector is for a Ø 22 mm welded pipe; its maximum flow rate with nitrogen at 9 bar outlet pressure is 90 Nm³/h, 1500Nl/min; the panel is completed by a steel plate and a white polycarbonate cover that is light and practical to install.

1st stage compressed gas manifols, medium / high flow rate for medical gases, available both with automatic change - over and manual reset and fully automatic; both versions are available with pressure switch or transducer; consisting of two double-head reduction lines, it guarantees continuity of supply with high stability at the operating pressure of 5 bar; complete with ramp purge valves; very compact, it is completed by a powder-coated steel plate and a white polycarbonate lid that is light and practical to install.

High flow rate control panel for oxygen, with automatic change-over and available both with reset and automatic; calibrated at 9 bar at the outlet, it reaches a maximum flow rate of 135 mc / h in oxygen in the manual reset version, 110 mc / h in the fully automatic version; it is available with pressure switch or transducer; consisting of two double reduction lines, it guarantees continuous supply with high pressure stability; complete with manifolf exaust valve; the outlet connector is for a Ø 22 mm welded pipe; the panel is completed by a steel plate and a white polycarbonate cover that is light and practical to install.

Panel III compressed gas source for medical gases, suitable for installation downstream of the reserve source; equipped with pressure switch and ramp purge valve; composed of a double-head reduction line, it guarantees a continuity of supply with high pressure stability; It is completed by a powder-coated steel plate and a white polycarbonate lid that is light and practical to install.

Cylinder connection manifold made with a single brass manifold, with two or three places; specific gas connection; non-return valve built-in in the inlet connection. It is made of materials compatible with the gases and applicable standards in medical gas field. The identification takes place through the indication of the name and/or symbol of the supplied gas and the production batch stamped on the manifold. The inlet and outlet connectors are made of brass with gas specific threads as per table. The wall fixing bracket is in galvanized steel.

Copper connection fitting for connecting two high pressure ramps or at the inlet of the decompression panel. The swivel nuts are gas specific threads in accordance with the standards.

Flexible connection made of Ø 8 mm chemically nickel-plated copper pipe, used to make a High Pressure connection between the cylinder and the manifold or control module; the connection nuts are also chemically nickel-plated CW614N brass, with a specific thread for the type of gas.

Pressure regulator for cylinders, suitable for medical gases, equipped with dual pressure gauge to show high and low pressure, used on the outlet of cylinders to reduce the pressure down to the line or equipment set.Maximum inlet pressure is 200 bar, the outlet pressure is adjustable up to 12 bar.The inlet connection is specific to the gas type, the outlet is fitted with an Ø 6 hose connector.Its maximum nitrogen capacity at 12 bar outlet pressure is 90 Nm³/h, 1500 Nl/min.

Pressure regulator for cylinders, suitable for medical gases, equipped with dual pressure gauge to show high and low pressure, used on outlet of cylinders to reduce the pressure down to the line or equipment set.Maximum inlet pressure is 200 bar, the outlet pressure is adjustable up to 12 bar.The gas inlet connection is specific to the gas type, the outlet is fitted with an Ø 6 hose connector.Its maximum nitrogen capacity at 12 bar outlet pressure is 60 Nm ³/h, 1000 Nl/min.

Pressure regulator for cylinders, suitable for medical gases, equipped with single pressure gauge to show cylinder pressure, used on cylinder outlets to reduce the pressure down to the line or equipment set.Maximum inlet pressure is 200 bar, the outlet pressure is adjustable up to 4 bar.The gas inlet connection is specific to the gas type, the outlet is fitted with a G1/4" M R connector.Its maximum capacity at 4 bar outlet pressure is 9 Nm³/h, 150 Nl/min.