Coatings2Go LLC products

Crosslinker B Concentrate is the active material in Crosslinker B without the diluent solvent. The diluent is what absorbs the moisture and causes eventual viscosity build on the shelf. B concentrate for the coating batch should be pre- mixed 1/1 with NMP (or acetone/inactive ketone, see Topcoat IFU) before adding to the batch. It is then equivalent to Crosslinker B in the instructions for use. It should be flushed with a dry non-reactive gas after opening, such as nitrogen or CO2.

Crosslinker A is used in all the coatings and primers for improved durability and adhesion. While the Crosslinker is quite shelf-stable, it should be flushed after opening with a dry non-reactive gas after opening, such as nitrogen or CO2.

REACH and European Med Device Regulation friendly alternative to 8-3C, formulated without NMP.

Primer 5-017 has found utility on Pebax and Nylon and some other low surface energy substrates/plastics. See our Instructions for Use Primer page for more info. The product is supplied as a kit with Crosslinker A for improved strength and adhesion.