Focare Mould Co.,Ltd. articles

Plastic Chair Molds tooling technical points summary 
Plastic chair molds running cycle time
plastic chair Molds sevice life gurantee
platic chair molds Parting line finishing
plastic chair Wall thickness
How to make plastic chair molds with less weight but strong enough
plastic chair molds stacking ability
plastic chair molds A

The highlight moulds means both more machining work and more technical difficulty.It require better machines and skilled workers.In principle, the thinner the highlight shell, the better heat transfer efficiency, and thus the easier to acquire a better weldless plastic part. But on the other hand, it may lead to deformation, losing its dimensional accuracy. Highlight shell requires machining on both sides and thus requires high precis

Today we will still talking about the Plastic Molds Design about the Molds Sprue Design.

Sprue is located at the entrance of  molds.It allows the melt plastic material to flow into the runner or cavity.A sprue bush is inserted on the cavity plate or runner.When direct gate is used, the plastic part will be left with a trace by the sprue. To keep the sprue bush in place, while being unde

Now recently more and more people enter into plastic chair production industry, the chair markets in many countries are in high competition. Thus Chair Design becomes one of the key points to be competitive in the market. And with modern people’s lifestyle improving, we are more and more seeking the beauty of the furniture as well as the utility.

While some companies still in the initial plastic chair manufacturing stage or planning enter into but without design team t

Through gas-assisted injection molding,products with uneven wall-thickness can be produced.The products produced by gas-assisted injection molding not only can avoid the surface shrink mark, warp and distortion and consume very small amount of materials,but also are easy to be controlled.thus the outer surface of the products are very smooth and no air bubble.It is a technology which use the high-pressure gas injected into core part of the plastic thermoplastic melt

Now in mold labeling is well applied in the lots of plastic parts, like the pails, automotive parts, thin wall container, chair…etc. Now this article is mainly talking about the IML application of the chair.

IML application key point is mainly including the below points:

Basical

Nowadays, Industrial crate is widely applying to the daily life, ranging from agricultural field, which is used to load the fruit, vegetable and so on. Not only it but also to the industrial transportation and store. Many customers order industrial crate mould from china and they care one of the hot items is how to save more room for the industrial crate stacking, how to make easier for industrial crate stacking, how to let the stacking

Stacking Moulds  is a special mould design for molding shallow parts in large quantities,like CD,DVD,Cup,Spoon,Knife, and Fork…disposable receptacle moulds.

Stacking Moulds cavitites are located in two or more planes corresponding to two parting lines and filled at the same time. It needs an exceptional molding machine with long opening stroke.People

Moulds cost of Polishing

Eevn with increasing mechnaization of the polishing process, there is still considerable time required to finish a mold. The Polishing time depends on the skill of the polisher, the quality of finish, the preceding machining operation,and on the hardness and quality of the material to be polished. Often, the as machined surface may be perfectly suitable for apperance of the product and for ejection. It