Medin, a.s. products

Plates fixate fractures of short bones or long (tub) bones, they are for corrections and bone stabilisation. Fixation of the plate on the bone is performed with the help of bone screws.

Pelvic plates are flexible plates determined for fixations of pelvis bone fractures, mainly in the area of acetabula, but also other pelvis fractures such as pubis symphysis, back vertical hip bones and in the area close to sacral bone.

Plates fixate fractures of short bones or long (tub) bones, they are for corrections and bone stabilisation. Fixation of the plate on the bone is performed with the help of bone screws. Reconstruction plates have lengthwise holes with spherical or conical surface of contact for screw heads.

Kirschner wires and K-wires are used to make bone fragments stationary and stabilized during fracture treatment, elongation of limbs, skeletal fixation, inner ostheosynthesis, osteotomy, arthrodesis, correction of deformities, revision procedures where other methods do not work, as guide elements to reach inner traction of bone fragments, guidance of instruments during hole pre-drilling and tapping of threads, guidance of cannulated implants e.g. screws, during introduction of binding and suturing materials.

C-NAIL is intramedullary nail for minimal-invasive fixation of intraarticular calcaneal fractures. The principle is to stabilize fragments of the fractured calcaneus using the nail with up to seven interlocking screws which create angularly stable fixation. The maximum of stability is achieved by fixing the sustentacular fragment towards the nail with two interlocking screws guided by a very precise aiming device.

Elastic nails are used for elastic stable intramedullar osteosynthesis that is indicated for treatment of diaphysial and metaphysical children fractures.

Humeral nail enables osteosynthesis of humeral bone. The nail can be introduced retrogradly or antegradly. Many possibilities of locking enable good fixation even for short distal or proximal fragments. Humeral nail is determined for treatment of: stabile or unstable broken parts pathological fractures of psudoarthrosis.

Diamond burs are part of the rotary instruments of dentistry by MEDIN. More than 50 years of experience in their production ensures diamond burs of the highest quality. Validated process of multilayer galvanic coating in combination with diamond grains ensures long product life. Production of diamond burs is controlled under the standard of ISO 14001, which guarantee environmentally friendly manufacturing prpcesses.

Diamand burs for more precise work and shorter time of preparation. Thanks to a special construction of the draining groove, fast removing of the material is ensured without the risk of warming up.