Ortho-Medical GmbH products

General Surgery

The Ortho-Medical product portfolio comprises scissors, forceps, needle holders, suturing instruments, hemostatic forceps and clamps, wound hooks and wound retractors, instruments for bone surgery such as mallets, gouges, raspatory devices, files, vascular instruments and much more. Further information you will find in our General Instruments Catalogue and in our Taumatology & Instruments Catalogue. For special product information see our product sheets.

Orlos Silicone - In Situ Rod Shear Cutter with Detachable Handles

Rods are sheared, leaving a smooth and clean surface rather than a sharp, jagged, burr - like surface common when using a standard pinching - type rod cutter. Rod cut by standard pinching-type rod cutter, Rod cut by ORLOS Silicone In Situ Cutter. The ORLOS Rod Shears easily cuts: 4.5mm [.177“], 5.5mm [.217“] and 6.35mm [.250“] diameter pins and rods.

Ortho-Medical - Orlos In-Situ Pin Shear Cutter, 29 Cm 30-137.29

Shear 3 different pin diameters with 1 instrument. Double action design allows for ease in cutting. Grooved handles are ergonomically designed for a comfortable and secure grip. Shears 2.5mm [.098“] 3.0mm [.118“] and 3.5mm [.138“] diameter pins with ease and provides a clean cut without burrs or sharp edges.

Hand Instruments for Manicure, Pedicure & Hygiene

Hand instruments for manicure, pedicure and hygiene must meet high quality requirements. Only high-quality materials in first-class workmanship and a well thought-out design guarantee safety and comfort in handling. The manufacturing technology of the instruments, which is based on a symbiosis of high-tech and manual work, as well as a high vertical range of manufacture, enable model consistency and the highest precision in consistent quality. Depending on the model, an ins¬trument requires 60 or more work steps, with about two thirds of the work being done by hand. After all, ORTHO-MEDICAL has known for more than 25 years that there is nothing more economical than high quality.

Neurosurgery

Aneurysm Clips

Labeling: Labels, showing the part number and serial number, as sure a clear identification of each clip. Additional labels can be attached to the patient`s records. Further information of the product (e.g. closing force, product description or maximum opening) is printed on the label of the outer packaging. Serial Number: Each clip is marked with an individual serial number. The serial number guarantees a detailed follow-up of the whole production process, the closing force and from the raw material to the final product. Closing Force: By using a computer controlled measuring equipment the closing force at one third of the jaw length and an opening of 1,0mm can be measured. Strict quality controls assure a constant closing force within the tolerance range. All relevant technical data is stored during the control procedure and printed on the label