Parsonpoxy - Model FP -Flexible Epoxy for Manhole Chimney and Joint Rehabilitation

Advantages

• Non-toxic – 100% solids
• Chemically resistant
• No primer required
• Pre measured kit – no guesswork

Physical Properties

Elongation  ASTM D-412: 600%
Tensile Strength  ASTM D-412: 1600 psi
Impact Flexibility  ASTM D-256: 120 inch pounds
Hardness, Shore A  ASTM D-2240: 80
Adhesion ASTM D-4541: 350 psi (substrate failure)
Slant Shear Strength  ASTM D-638: 2000 psi

Application
Surfaces must be cleaned of all rust, scale, grease and loose material. Clean concrete with a minimum 3500 psi waterblast and metal with mechanical wirebrush. Surface must be dry prior to application of material. Sandblasting is not required. Empty contents of Part B into Part A container and mix until a uniform color is achieved. Pot Life is approximately 40 minutes at 77°F.

Packaging
PARSONPOXY FP is available in Full Kits (1.25 gallons) or Half Kits (.625 gallons).

Coverage
One Full Kit of mixed material will cover approximately 24 vertical inches in a 27" diameter manhole (170 sq. in. or 14 sq. ft.) at 115 mils thick.