Refine by
Applications For The Served Air And Climate Industry Available In Oman
185 applications found
Premium
Ventilation Air Methane (VAM) is a Greenhouse Gas (GHG) released by coal or mineral mining operations, it is also commonly known as Coal Mine Methane (CMM). The air pollutants from this process have a global warming potential 21 times greater than carbon dioxide, which is another well known GHG. As alternative energy technologies have developed, methane is increasingly used to generate electricity and heat. Landfills and mines represent two of the most abundant sources, however reports indicate that more than ...
ByAnguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA)
Premium
Prevent biofouling growth: Algae can grow in the cooling tower itself and on the grids from the tower. This could lead to enormous disadvantages of biofilm in cooling towers. Therefore, water used in cooling towers needs frequent treatment and chemical shocks to keep levels of micro-organisms to a minimum. The LG Sonic Industrial Line allows to reduce chemical dosage and offers local treatment were biofouling growth can’t be prevented with ...
ByLG Sonic B.V. based in Zoetermeer, NETHERLANDS
Premium
Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Premium
The energyMEDOR ppb allows the end user to observe the speciation of each component of the Sulphur present in natural gas, or for quality control of disulphuric gas (ppb) after ...
ByChromatotec based in Val de Virvée, FRANCE
Premium
Brentwood engineers reliable cooling tower components, including film fill media and drift eliminators, designed to provide long-lasting performance in industrial and commercial applications. Expertly engineered cooling tower components and solutions built on a foundation of comprehensive polymer knowledge, diverse worldwide manufacturing, and superior customer ...
ByBrentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA)
Premium
Carbon Capture and Storage (CCS) is an emerging method of reducing greenhouse gas (GHG) emissions of power plants. In a process called ‘scrubbing’, the carbon dioxide emissions can be absorbed into chemical solvents consisting of amines or carbonates. Scrubbing is a well-established method of carbon capture, with virtually every commercial CO2 capture plant in operation using this process. In the process, the first step is the removal of impurities from the flue gas, such as hydrocarbons and oxides of ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Premium
Chromatotec can propose for hazardous areas (for instance refineries) specific boxes for our analysers : category 1 IIc T4 for ...
ByChromatotec based in Val de Virvée, FRANCE
Premium
The aim: analysis of H2S ppb and mercaptans with the TRSMEDOR because of the bad smell of ...
ByChromatotec based in Val de Virvée, FRANCE
Premium
It deals with the quality control according to the following conrol: 4.0 (99.99 %). We can propose this application with the analyser ...
ByChromatotec based in Val de Virvée, FRANCE
Premium
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Premium
The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Premium
Air Liquide, Praxair, Air Products, BOC, Messer, Linde, Takachiho, Aga, etc. need to control the amount of impurities before delivery to customer in petrochemical or chemical ...
ByChromatotec based in Val de Virvée, FRANCE
Premium
Removal of silica sand from dryers. Crushing and material handling ...
ByBionomic Industries Inc based in Mahwah, NEW JERSEY (USA)
Premium
Removal of acid gases and NOx from material surface treatments. Remove titanium dust from grinding, abrasive polishing and buffing operations. Emissions from high temperature ...
ByBionomic Industries Inc based in Mahwah, NEW JERSEY (USA)
Premium
The United States Environmental Protection Agency (EPA) has two stack testing methods for FTIR gas analyzers. Method 320 is an FTIR method for measuring wide range of organic and inorganic pollutants. Method 321 is a specific version for measuring hydrogen chloride HCl at cement kilns producing Portland cement. These methods define a quality assurance and control processes for verifying the accuracy of the results. The requirements for analytical equipment and software are defined on 40 CFR Part 60 Appendix B ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Premium
In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Premium
The consumption of scrubbing material in a scrubber is related to the mass flow of acid gases. Hydrogen chloride (HCl) and sulphur dioxide (SO2) are the major acid gases in an incinerator. By measuring the mass flow of SO2 and HCl in the raw gas going into the scrubber, it is possible to calculate the required quantity of scrubbing ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
ByENVEA based in Poissy, FRANCE
Premium
OWI-430 DSP-WIVISTM Present Weather and Visibility Sensor Combines present weather identification, precipitation measurement and visibility into a single rugged package. • Outstanding performance yet low cost • DSP based – no field calibration required • Advanced scintillation technology • Intelligent algorithms based on over 800 million hours of OSi sensor field data • Rugged design – field proven from tropical to sub-arctic environments • Easy Installation and integration • Long-term reliability – designed for ...
ByOptical Scientific Inc. (OSi) based in Gaithersburg, MARYLAND (USA)
Premium
Tekran offers the only completely integrated, automated system for measuring mercury speciation in air. The Tekran 2537, when coupled to the Model 1130 and Model 1135 provides a continuous record of gaseous elemental mercury, gaseous oxidized mercury and particle-bound mercury. Over the past 12 years, the Tekran 2537-1130-1135 system has been the most significant tool used to advance the understanding of the fate and transport of atmospheric mercury. See the Expert’s Corner for details about international ...
ByTekran Instruments Corporation based in Toronto, ONTARIO (CANADA)