Jianerkang Medical Co., Ltd  products

The product is made of non-woven fabric, which is cut, sewn (or heat-sealed), and consists of a body, sleeves, belts, etc. This product is supplied sterile, ethylene oxide sterilized, and single-use.

It consists of basic configuration and optional configuration. The basic configuration consists of disposable medical surgical pads and examination gloves. The optional configuration consists of surgical drapes, surgical gowns, sterile protective covers, medical cotton balls, medical cotton swabs, medical disinfection cotton balls, medical Absorbent cotton, medical absorbent gauze sheets, surgical gloves, medical surgical masks, medical non-woven caps, dispensing syringes with needles, dressing forceps, instrument forceps, disinfection brushes, mouth mirrors, dental mouthpieces, cement fillers, dental hair Brush, probe, tongue depressor, medical tape, tray, curved plate, medicine cup, medical paper towel, shoe cover, cloth, medicine cup label.

It consists of basic configuration and optional configuration. The basic configuration consists of medical surgical pads and medical wraps.

With benzalkonium chloride as the active ingredient.

Divided into gauze cotton pads and non-woven cotton pads. The gauze cotton pad is made of medical absorbent cotton gauze and medical absorbent cotton, and the non-woven cotton pad is made of non-woven fabric and medical absorbent cotton.

The disposable medical mask is composed of a non-woven fabric layer and a mask belt. Among them, the non-woven fabric layer is formed by folding and compounding a non-woven fabric and a melt-blown fabric, the outer layer is a non-woven fabric, and the interlayer is a melt-blown fabric.

Medical surgical masks are composed of a surface layer, a filter layer, a bottom layer, a nose clip and a mask belt. The surface layer and the bottom layer are composed of spunbonded non-woven fabric, the filter layer is composed of melt-blown non-woven fabric, the nose clip is composed of plastic materials, and the mask band is composed of spandex elastic or non-woven fabric.

Medical protective masks (hereinafter referred to as masks) are mainly made of mask body, nose clip and mask belt by ultrasonic heat sealing. The inner and outer layers of the mask are made of non-woven fabrics; the middle layer is made of meltblown cloth and hot air cotton; the nose clip is made of bendable plastic materials; Contains mask belt adjustment buckle, the adjustment buckle is made of PVC material, which can adjust the length of the mask belt.

The disposable high negative pressure drainage device consists of a drainage bottle, a vacuum indicator, a guide tube, a guide tube lock plate, a female connector, a hanging strap, a male connector, a connecting tube, a connecting tube lock plate, a drainage tube connector, and a drainage tube , Puncture needle, protective sleeve, etc. The minimum initial vacuum negative pressure preset in the drainage bottle of the high negative pressure drainage device is not less than 80KPa.