Medartis AG products

TriLock – multidirectional (±15°) and angular stable locking technology. Rounded edges and smooth surface. Pre-contoured plate geometry. Offset screw holes. Double screw row. Double-bars in the shaft.

TriLock – variable angle of ± 15° in all directions in each screw hole*. Pre-angled TriLock holes for oriented screw placement specially for the radial styloid. Rounded edges and a smooth surface for soft tissue protection. Oblong hole for variable plate positioning. Radiolucent drill guide block available for rapid and easy angulation of screws. First distal screw row for support of the central aspect of the radio carpal joint.. Second distal screw row provides stabilization of the dorsal rim. K-wire holes for temporary fixation of the plate. Exception: oblong hole.

TriLock^PLUS screw holes offer the advantage of locking and compression in one step. Oblong holes for minor plate adjustments. TriLock – multidirectional angular stability of ± 15° in all directions and in each screw hole*. K-wire holes to assist with temporary plate fixation. Low plate profile, rounded edges and a smooth surface for soft tissue protection. Exception: oblong holes.

Plate sizing designed to address the «safe zone». Two proximal rows of screws for better support of the head. Two plate bars in the shaft region for increased stability. Holes in the shaft region are offset to prevent screw collisions. Screw holes for 2.0 mm TriLock locking or cortical screws. Plate thickness 1.4 mm. 1.2 mm K-wire holes.

The APTUS Clavicle system provides surgeons with a versatile and anatomical solution to treat fractures, osteotomies, malunions and non-unions of the clavicle.

Sharp screws to cover numerous areas of use across upper and lower limb due to patented SpeedTip polygonal geometry, precise and sharp thread, optimized cutting geometry. Self-holding porperties beween screw and screwdriver due to patented HexaDrive.

Plate has a combination of 2.8 and 3.5 mm screws. 20° posterior-anterior oblong hole and round hole with recess for syndesmotic screw fixation. Eight 2.8 Trilock screws in the thinner distal section. 2.8 mm flap for fixation of Wagstaffe fragment.

Three defined dorsiflexion angles. 10° valgus angle. TriLockPLUS – Compression and angular stable locking. K-wire hole for temporary fixation. K-wire slot for compression with K-wires.

K-wire slot for compression with K-wires. Oblong hole for variable autograft fixation. TriLockPLUS – Compression and angular stable locking. Closely arranged distal holes. K-wire hole for temporary fixation.

1.6 mm thick plates with offset screw geometry in the shaft. Oblong hole for 2.8 mm cortical screws. Standard plate – three screw placements in the distal section of the plate. K-wire hole distally and proximally for temporary fixation with K-wires.