NDI Medical products

Optimum implants are optimate in clinical cases of different level of complicacy. Their manufacturing provides the primary stability due to the decreasing of the bone tissue pressure and high osseointegration. An implant has an absolute purity of the surface and excludes the risk of the microbe contamination.

The kind of stable and long-lasting implants recommended for the installation in different clinical cases. Stable in a bone of any quality.

Shortened implants are used with insufficient bone quality and a small height of the alveolar bone. The traditional implant systems use is limited by the low quality of bone, reduction of the height of the alveolar apophysis, anatomy of the maxillary sinus and channel of the lower jaw limit the use of traditional implantation systems.

Implant for carrying out the operation of bone widening.

Self-cutting implant with cavity and through holes. Due to the original design, the bone tissue is less injured and lost. Recommended for a bone of poor quality.

Designed for proper formation of the bone socket for the implant. Made of surgical stainless steel 1.4197 (X20 CrNiMoS13-1) that has been specially sharpened. Tensile strength Rm: 881-900 N/mm². Superior corrosion resistance and wear resistance. Depth mark grooves at 8, 10, 11.5, 13, and 15 mm. Additional laser marking inside the grooves.

The seating instrument is designed for the correct insertion of the implant into the implantation socket. Adapted for torque wrench and contains a lock. Made of surgical stainless steel 1.4197 (X20 CrNiMoS13-1). Improved corrosion resistance and wear resistance.

Bone cutting burrs are used to make it easier to employ and precisely position the implant drills used at the next stage. Made of surgical stainless steel 1.4197 (X20 CrNiMoS13-1). Tensile strength Rm: 881-900 N/mm². Superior corrosion resistance and wear resistance.

It includes one torque wrench and seven wrench - adapters: two short hex wrenches; two middle hex wrenches; two 4-way wheel for transocclusal and laboratory screws; one short hexagon wrench for dental impressions.

Laboratory implant analogs imitate internal part of intraosseous part of the implant. They are used for modelling the basic prosthesis and for copying the implant. The actual model includes the basis with vertical and horizontal antiretention elements. Fixed on the appropriate parts of the mould then the stucco operation model with analogs is made. The analog prosthesis is more accurate. The analogs are made in different diameters with hexagon.