Intevac Vision Systems (IVS) E3010M Module Brochure

Intevac Photonicsinnovation at the speed of light ® E3010MDigital Image Intensifier (DI2)The E3010M Digital Image Intensifier (DI2) is a self-contained sensor module specifically designed for integration into imaging systems including head/helmet-mounted displays, rifle sights and small electro-optic/infrared (EO/IR) surveillance platforms. The E3010M incorporates a 1280 x 1024 pixels (SXGA) electron bombarded CMOS sensor, both high and low voltage power supplies,and flash memory, all potted into a connectorized housing for reliability and environmental ruggedness. The module has a single connector for sensor control and clocking, communication, video data, and power. The E3010M also incorporates Intevac’s proprietary low halo technology and operates in both low light and full light conditions. The E3010M is available with or without Intevac video processing electronics to facilitate integration into a wide range of compact imaging systems.E3010M Digital Image Intensifier (DI2)©2012 Intevac, Inc. Intevac Photonics is a subsidiary of Intevac, Inc. Intevac, the Intevac logo, and Innovation at the Speed of Light are trademarks or registered trademarks of Intevac, Inc. All other trademarks are the property of their respective owners.Mike Mohawk408.987.2573mmohawk@intevac.comwww.intevac.com/intevacphotonicsNOTE: This product is under the export control of the Office of Defense Trade Controls, U.S. Department of State, and is subject to the International Traffic in Arms Regulations. Transshipment to any destination outside of the United States without the knowledge and consent of the Office of Defense Trade Controls is strictly prohibited.Image FormatPixel SizeSensor FormatSpectral Response1280 x 1024 pixels (SXGA)10.8 µm square (100% optical fill factor)1 inch (17.7 mm diagonal)400 nm - 880 nm (intensified); 800 nm - 1050 nm (non-intensified)Daylight to overcast starlight; day-mode operation with HVPS offNyquist ResolutionHigh Voltage Power Supply (HVPS)46 lp/mm (1280 lines)Duty cycled for automatic gain control (AGC)Steady State Power ConsumptionOutput Signal FormatDimensions< 550 mW at 3.3 VDC10-bit parallel LVTTL digital output; 30 Hz progressive scan at full resolutionApprox. 1.2” H x 1.0” W x 1.3” DWeightDefective PixelsOther Specifications= 57 grams (packaged with HVPS)< 1% Provided upon request• Compact • Lightweight (57 grams)• Low Power (< 550mW)• Low Halo Technology07/2012FEATURESSPECIFICATIONSDynamic RangePDS0008_rA