Validated Guidelines

Klorsept and Klorkleen validated guidelinesArea of use Type of uses Method of use Solution strength Food Preparation Washing minimally processed foodsLeave to soak for 15 minutes in a Klorsept solution.50 mg/lFood preparation surfacesWipe over surfaces with a Klorsept (disinfection only) or Klorkleen solution (cleaning and disinfection), and leave for 15 minutes before use100mg/lGeneral Environment Intermediate and Low RiskWipe over surfaces with a Klorsept or Klorkleen solution, and leave for 15 minutes before use200mg/lDiagnostic rooms, patient areas, hydrotherapy pool surrounds, trolleys, instrument trays, medical equipment handles etc.Immerse items for 15 minutesBedpans, linen, mops etc.High Risk Operating theatres, post-mortem rooms, burns unit, intensive care, isolation units, clinical and pathology laboratories etc.Clean surfaces and then wash/wipe surfaces with a Klorsept or Klorkleen solution. Leave for 15 minutes. Metallic surfaces should be rinsed with potable water afterwards1000mg/lLaboratory discard jars, pipettes etc.Submerge discard items for 60 minutes before disposal2500mg/lHIV, HBV and Similar Contaminated surface or equipmentWash or wipe surfaces with a Klorsept or Klorkleen solution and leave for 15 minutes. Metallic surfaces should be rinsed with potable water afterwards.5,000mg/lBody fluid spillage (not urine)Shake Klorsept Granules on the spillage to completely cover and absorb the fluid. Wait 2-3 minutes and scoop up absorbed product. Wipe over the surface with a Klorsept or Klorkleen solution of 1000mg/l. Dispose of waste.GranulesWhere granules are not available, the area should first be covered with paper towelling or other absorbent material and a Klorsept solution poured over the absorbent material and left for 10 minutes. The whole spill is then wiped up with fresh absorbent material and placed in a contaminated-waste container. The surface is then wiped with a Klorsept/Klorkleen solution of 1000mg/l10,000mg/l