Loftex - Model WIPES DESi-Box - Disposable Wipe Dispenser System for Surface Disinfection

• 100% PET-fiber, non-woven roll, low linting
• Complete and efficient use of the disinfectant
• Prevention of cross-contamination
• Minimum adsorption in comparison to non-woven cloth qualities
• Ideal wetting of the disinfection surface
• More efficient disinfection and cleaning results due to perforated structure compared to flat non-woven cloth surfaces
• Safe closure of the wet wipes through the lid of the DESi-Box
• Perforated wipe rolls already placed in the dispensers
• Printed batch label for labeling the wipe dispenser system
• Use the dispenser system for surface disinfection in areas with / without risk of infection and in areas with special risk of infection (disposable)
• Independent efficiency report, over 28 days of service life with LOFTEX®-WIPES in a wipe dispenser system available upon request
• Incl. 4-field test, phase 2, level 2 according to the requirements of DIN EN 16615: 2015 microbiological stability according to EuAB 2008, chapter 5.1.3

• PET
• wringable
• very absorbent
• extra soft
• low linting
• especially tear-resistant
• solvent resistant

• Areas of application with special requirements, e.g. for surface disinfection in the health sector. In areas with / without risk of infection and in areas with special risk of infection. After impregnation with surface disinfectants, LOFTEX®-WIPES DESi-Box can be used for 28 days.

1. Wear gloves and disinfect the working surface.
2. Open the cap and pour over the LOFTEX® WIPES with 2.0-2.5 liters of ready-to-use solution, from the center to the outside.
3. Pull LOFTEX®-WIPES through the wet tissue and dispose of the first wipe.
4. Close the LOFTEX®-WIPES DESi-Box safely.
5. Label the batch label with a waterproof pen. After approx. 20 minutes, the LOFTEX®-WIPES are completely soaked and ready for use.
6. After soaking, the LOFTEX®-WIPES can be used for 28 days. Not suitable for disinfection of invasive medical devices. Read the enclosed instructions carefully. Do not use dried towels.
7. LOFTEX®-WIPES dispose of product residues and cloths properly after the end of their service life. Not suitable for reprocessing.

Special instructions:
Remove visible contaminants before disinfecting. Thoroughly wipe the surface of application with the pre-soaked LOFTEX®-WIPES and ensure complete wetting. Do not use dried LOFTEX®-WIPES. Close the lid of the DESi box after each removal. Exposure times, application concentration and special instructions are indicated on the disinfectant. Efficacy report available upon request.