- Home
- Companies
- Uniphos Envirotronic Pvt. Ltd. (UEPL)
- Products
- Uniphos KwikSense - Smart Digital Gas ...
Uniphos KwikSense - Smart Digital Gas Transmitter
The Uniphos KwikSense Smart Digital Gas Transmitter is a universal gas transmitter capable of detecting a wide range of toxic and flammable gases that may be present in industrial process. Smart Sensor in the transmitter enable us to swap them between any Sensor Technology. It is a field mounted device which is compatible with all Uniphos Smart Gas Sensors and is suitable for the detection and continuous monitoring of hazardous gas leaks in your working site.
- Oil, Gas and Petroleum Industry
- Petrochemical Industry
- Chemical Industry
- Pharmaceutical Industry
- Marine Industry
- Fertilizer Industry
- Nuclear Industry
- Iron and Steel Industry
Our groundbreaking Smart Sensor Technology, with Transportable Calibration, allows quick sensor changes with pre-calibrated gas sensors, saving time and money. Also, the non-intrusive calibration allows customer to perform calibration in the hazardous areas without opening the transmitters, thus reducing the downtime of calibration.
It comes with an RS-485 MODBUS-RTU digital output signal that can be connected to any suitable control system viz. Uniphos controller, DCS, PLC, etc. It also provides an industry standard 4-20 mA analog output. HART protocol can also be provided in the transmitter.
The KwikSense Smart Digital Gas Transmitter has numerous international certifications including ATEX, IECEx, MED and SIL2.
- A True Universal Transmitter
- Industry standard 4-20 mA analog output with Digital communication on MODBUS over RS 485
- Pre-Calibrated Smart Sensor capable of swapping between any sensor technology
- Non-Intrusive calibration with magnetic wand
- Certification – ATEX, IECEX, SIL2 ,InMetro, MED
- 3 configurable on-board potential free relay contact
- Temperature Class T4: -20o to +85o Celsius
- Bright OLED display
- Sensor technology: EC/PEL/NDIR/PID/SS
- Operating Voltage: 18V to 30 VDC
- System Type: µController based instrument (non intrusive calibration)
- Display: 8 x 2 OLED Display
- Sampling type: Diffusion
- Sensor: Swappable Smart Sensor
- LED’s: Tri-Colour LED
- Alarms: Two user settable alarms
- Output: RS-485 MODBUS/ 4-20mA Current
- Relays: 3-potential free contacts
- Load resistance: 600 Ω (max)
- Power Consumption: < 3 W
- Enclosure: Flameproof – Cast Alluminium alloy/SS-316
- Ingress protection: IP66
- Dimensions: Approx Diameter: 150 mm; Height: 110 mm
- Wire configuration: 3/4 wires
- Interface: Calibration & configuration via Non-intrusive magnetic wand
- Operating Temperature: -20 to 60 ° C
- Operating Pressure: Ambient + 10 %
- Operating Humidity: 0-95 %RH (non-condensing)
- Cable entries: ½” NPT (2 entries)
- Certifications: ATEX/IECEx + PESO, CMFRI, SIL, MED, InMetro
- Weight: Cast Aluminium Alloy: 2.5 kg (Approx.)
- SS 316: 5.2 kg (Approx.)