Fatigue Test Of Transverse Control Arms Using Servohydraulic Testing Machine - Video

Transverse control arms are used to stabilize the wheels of vehicles and are therefore subjeted to cyclic stresses. The HC25 compact is a servo hydraulic testing machine with an integrated hydraulic power unit and is used to apply a fatigue load on the control arms. As the Power unit is already part of the machine it does not require external hydraulic supply and can be easily used as a stand-alone working station.

► A complete testing system with hydraulic power pack ◄

The HC Compact is a complete testing system with an extremely small space requirement. The low noise power pack forms the base support for the test frame, which reduces the machine's footprint to a minimum.

The HC Compact testing machine is available in two sizes.

♦ The HC Compact 10/25 kN is designed for fatigue tests on smaller components, down to and including biomedical tests. The machine is equipped with a T-slotted platform and the testing actuator is therefore located in the upper crosshead.
♦ The HC Compact 50/100 kN is adapted for a full range of accessories for tests on composites, with which both static and dynamic testing can be performed. Due to the high stiffness of the load frame and easy connection of a high-temperature furnace, this machine is also optimally suited for LCF tests.

A temperature chamber can be installed on both models without a lot of effort.



00:08 - Machine overview
00:26 - Mounting specimen
00:42 - Running the test
01:06 - Advantages and features


#fatiguetest #ServoHydraulicTestingMachine #TransverseControlArms