- Home
- Applications
- canada nunavut
- medication application
Refine by
Medication Application Product Applications Available In Canada Nunavut
33 applications found
Using a “Fast Orifice Inlet” and a 2m PTFE sample line the following data was collected. The sample line was held close to the subject’s Nose and a series of breathing patterns were acuired. The MS was firstly calibrated in room air for N2, O2, CO2 and Ar. The MS was set to collect data at an analysis dwell/measurement speed of 2ms / gas. Looking at the data below and concentrating on the CO2 and O2 signals. The first block of peaks were at measured at approximately 1 sec/breath for 10 breaths ...
ByAspecMS Ltd based in Pentraeth, UNITED KINGDOM
Axetris mass flow devices are used in a variety of medical applications: Oxygenators, Ventilators and ...
ByAxetris AG based in Kaegiswil, SWITZERLAND
Premium
The new and unique AS32M NO2 analyzer using CAPS (Cavity Attenuated Phase Shift) technology is an ideal solution for medical device applications such as INO (Inhaled Nitric Oxide). Originally designed for NO2 monitoring in roadside pollution surveillance and air quality applications, the AS32M is suitable for numerous other NO2 monitoring applications. ...
ByENVEA based in Poissy, FRANCE
Our OXYBERG® Generators are designed specifically for hospitals, utilizing pressure swing adsorption (PSA) technology to separate oxygen from ambient air ...
ByBERG GaseTech GmbH based in Krefeld, GERMANY
Axetris infrared sources are used in a variety of medical applications: Anesthesia Monitoring, Capnography, Blood Gas Analysis, Pulmonary ...
ByAxetris AG based in Kaegiswil, SWITZERLAND
Axetris offers solutions for high-performance oxygen gas flow control in medical applications in the form of meters, controllers or gas mixing ...
ByAxetris AG based in Kaegiswil, SWITZERLAND
Highly refined, pulverized Attapulgite is used in the pharmaceutical and cosmetic industry. MegaGel-40 Regular and Colloidal grades are primarily used as an absorbent in anti-diarrheal applications or as a binder to aid in pelleting or tableting. MegaGel-40 Regular and MegaGel-40 Colloidal are produced as per IP / BP norms by Manek Group of Companies. Utmost care is being taken to produce and store the ...
ByManek Minerals based in Kachchh, INDIA
In modern medicine there is a constant demand to collect data about patients’ physical, physiological and behavior, monitor medical instruments inside hospitals to reduce multiple systems or shortage, monitor hospital staff’s hygiene with a dedicated bracelet and many other applications that requires monitoring and data ...
BySol Chip Ltd. based in Haifa, ISRAEL
At Silclear we manufacture a range of high performance silicone tubing and silicone peristaltic tubing for numerous medical applications. We are able to comply with customer's clean-room requirements as well as heat sealed packaging and specific Certificates of Conformances. ...
BySilclear Limited based in New Milton, UNITED KINGDOM
Laser micro processing is a technology that enables the manufacturing of components with micron accuracy. For the medical application such as stent therapy (especially in coronary heart disease), catheters, IOL (Intraocular Lenses), vascular clips, surgical staples, hollow needles, endoscopes, hypo tubes the highest micro material processing quality demands. ...
ByAKONEER based in Vilnius, LITHUANIA
VR Vitalis Pro is a certified medical device. The innovative application is specifically designed with the needs of professional rehabilitation departments in mind. ...
ByVR LIFE s.r.o. based in Ostrava, CZECH REPUBLIC
The measurement of oxygen and water vapor permeation is often critical in medical and pharmaceutical applications; to prevent contamination, to extend the shelf life and potency of drugs and to ensure powders do not clog. ...
ByIndustrial Physics Product Integrity Limited based in Thame, UNITED KINGDOM
IPE is focused on manufacturing custom extrusions for many medical and high technology applications. Being an ISO certified company since 1994, positioned us to develop high quality products for an international marketplace. ...
ByInternational Polymer Engineering, Inc. (IPE) based in Tempe, ARIZONA (USA)
Providing venous thromboembolism (VTE) prophylaxis to all at risk hospital patients. NICE guidance (MTG19) supports the geko™ device to reduce thromboembolism risk for patients when other mechanical and pharmacological methods of prophylaxis are impractical or ...
ByFirstkind Ltd based in High Wycombe, UNITED KINGDOM
Materials may be studied using a number of advanced X-ray Fluorescence techniques made possible using intense sources of monochromatic radiation, such as are available from electron storage rings known as Synchrotrons. Information such as elemental and chemical composition and speciation of chemical bonds may be determined at micrometer and even nanometer scales using modern synchrotrons and techniques employing X-Ray Absorption Spectroscopy (XAS) ...
ByRayspec Ltd. based in Buckinghamshire, UNITED KINGDOM
Current practice acknowledges that a reduction in venous stasis of the lower limb reduces DVT incidence in acute stroke patients1. It is also recognised that DVT is a blood clot that most commonly forms in the deep veins of the ...
ByFirstkind Ltd based in High Wycombe, UNITED KINGDOM
USP37 Medical Gas requires a specific, selective and positive identification test using a paramagnetic signal. Regular analysis of medical gas is required to ensure that the oxygen concentration is NLT 99.0% volume. ...
ByIndustrial Physics Product Integrity Limited based in Thame, UNITED KINGDOM
Preventative care for obstetric related venous thromboembolism (VTE). Pulmonary embolism (PE) is the leading cause of maternal death in the developed world. Patients are 5 times more likely to develop deep vein thrombosis (DVT) during pregnancy2. The UK incidence of VTE in pregnancy and the puerperium is 1–2 episodes per 1,000 patients3 and accounts for 10% of all maternal deaths in the United ...
ByFirstkind Ltd based in High Wycombe, UNITED KINGDOM
Preventing the build-up of post-operative oedema following orthopaedic surgery. Swelling in the knee, in the acute recovery period following TKR, can impair quadriceps muscle strength and ...
ByFirstkind Ltd based in High Wycombe, UNITED KINGDOM
When the use Angiodroid The CO2 Injector is safe and effective; As is increasingly demonstrated, the use of CO2 as a Contrast Agent can bring considerable advantages in many types of intervention in the field of Interventional Cardiology, Interventional Radiology, Interventional Angiology and Vascular Surgery. Because of its Gas Properties, Carbon Dioxide infact can be injected into each lumen structure (arterial, venous, biliary tract, abscesses, fistulas) below the diaphragm. It is especially indicated for ...
ByAngiodroid Spa based in San Lazzaro di Savena (BO), ITALY