- Home
- Applications
- europe
- medication application
Show results for
Refine by
Medication Application Product Applications In Europe
34 applications found
Using a “Fast Orifice Inlet” and a 2m PTFE sample line the following data was collected. The sample line was held close to the subject’s Nose and a series of breathing patterns were acuired. The MS was firstly calibrated in room air for N2, O2, CO2 and Ar. The MS was set to collect data at an analysis dwell/measurement speed of 2ms / gas. Looking at the data below and concentrating on the CO2 and O2 signals. The first block of peaks were at measured at approximately 1 sec/breath for 10 breaths ...
ByAspecMS Ltd based in Pentraeth, UNITED KINGDOM
Axetris mass flow devices are used in a variety of medical applications: Oxygenators, Ventilators and ...
ByAxetris AG based in Kaegiswil, SWITZERLAND
Premium
The new and unique AS32M NO2 analyzer using CAPS (Cavity Attenuated Phase Shift) technology is an ideal solution for medical device applications such as INO (Inhaled Nitric Oxide). Originally designed for NO2 monitoring in roadside pollution surveillance and air quality applications, the AS32M is suitable for numerous other NO2 monitoring applications. ...
ByENVEA based in Poissy, FRANCE
Germany’s biopharmaceuticals sector increased turnover by 14 percent last year, with the country’s biotech companies as important actors in the fight against Covid-19. Germany is the world’s leading medical biotech nation behind the US. The industry’s strength comes from the presence of long-established and start-up companies alike. Industry, government, and the research sector are pulling in one direction to build on the thriving sector’s already strong market foundations. With the ...
ByGermany Trade & Invest based in Berlin, GERMANY
Our OXYBERG® Generators are designed specifically for hospitals, utilizing pressure swing adsorption (PSA) technology to separate oxygen from ambient air ...
ByBERG GaseTech GmbH based in Krefeld, GERMANY
Axetris infrared sources are used in a variety of medical applications: Anesthesia Monitoring, Capnography, Blood Gas Analysis, Pulmonary ...
ByAxetris AG based in Kaegiswil, SWITZERLAND
Axetris offers solutions for high-performance oxygen gas flow control in medical applications in the form of meters, controllers or gas mixing ...
ByAxetris AG based in Kaegiswil, SWITZERLAND
Demand for innovative medical technology solutions continues to grow as we live longer, healthier lives. In 2018 spending on medical technology in Germany reached an estimated record high of EUR 36 billion. This creates growth opportunities for the medical technology industry, which in Germany is made up almost entirely of small and medium-sized companies. The positive outlook in the domestic market, combined with strong exports of “Medtech Made in Germany,” resulted in a 10.4 percent domestic ...
ByGermany Trade & Invest based in Berlin, GERMANY
NeuroHeal Pro is an advanced medical application designed to integrate cutting-edge technologies for non-invasive cold laser therapy, aiding in the treatment of diabetic wounds, brain function enhancement, and suture fixation support. ...
ByContent Management Test Company based in Madrid, NORTHERN IRELAND
At Silclear we manufacture a range of high performance silicone tubing and silicone peristaltic tubing for numerous medical applications. We are able to comply with customer's clean-room requirements as well as heat sealed packaging and specific Certificates of Conformances. ...
BySilclear Limited based in New Milton, UNITED KINGDOM
Laser micro processing is a technology that enables the manufacturing of components with micron accuracy. For the medical application such as stent therapy (especially in coronary heart disease), catheters, IOL (Intraocular Lenses), vascular clips, surgical staples, hollow needles, endoscopes, hypo tubes the highest micro material processing quality demands. ...
ByAKONEER based in Vilnius, LITHUANIA
VR Vitalis Pro is a certified medical device. The innovative application is specifically designed with the needs of professional rehabilitation departments in mind. ...
ByVR LIFE s.r.o. based in Ostrava, CZECH REPUBLIC
The measurement of oxygen and water vapor permeation is often critical in medical and pharmaceutical applications; to prevent contamination, to extend the shelf life and potency of drugs and to ensure powders do not clog. ...
ByIndustrial Physics Product Integrity Limited based in Thame, UNITED KINGDOM
We can provide assistance with your custom applications. CaP Biomaterials has a deep understanding of calcium phosphates and can manufacture custom calcium phosphates to meet your product specifications. We have worked with R&D teams of many small and large companies, priding ourselves of our responsiveness, intrinsic motivation to help you turn your development process into a success and assuring that we have the optimal process that fits your needs in volume, cost and ...
ByCaP Biomaterials, LLC based in East Troy, WISCONSIN (USA)
Combining cutting edge-innovation, a long tradition as the “world´s pharmacy” and continuously growing demand for healthcare products, Germany is the ideal location for pharmaceutical R&D, production, and sales of medicines.Driven by trends such as demographic change, a rise in chronic diseases and an increasing emphasis on prevention and self-medication, Europe’s biggest pharmaceutical market is growing faster than the German economy. Germany belongs to the ...
ByGermany Trade & Invest based in Berlin, GERMANY
Point-of-Care Testing at Doctor’s Office, in Hospitals & Clinics, Mobile Testing at Patient Side, Clinical Trials, Govermental Healthcare Programs, NGO based Healthcare Screening Programs (WHO, Unicef) ...
ByChembio Diagnostics GmbH based in Berlin, GERMANY
Calcium phosphate bioceramics such as HA or TCP or biphasic HA/TCP are very similar in composition to the main mineral portion of bone. These ceramics have demonstrated excellent biocompatibility. In porous forms, the structure mimics the structure of bone. Interconnected pores of sufficient size have been shown to provide a highly biocompatible matrix for osteoconduction. The use of these synthetic graft materials avoids some of the concerns with allografts (human bone source) and xenograft’s (animal bone ...
ByCaP Biomaterials, LLC based in East Troy, WISCONSIN (USA)
Providing venous thromboembolism (VTE) prophylaxis to all at risk hospital patients. NICE guidance (MTG19) supports the geko™ device to reduce thromboembolism risk for patients when other mechanical and pharmacological methods of prophylaxis are impractical or ...
ByFirstkind Ltd based in High Wycombe, UNITED KINGDOM
Materials may be studied using a number of advanced X-ray Fluorescence techniques made possible using intense sources of monochromatic radiation, such as are available from electron storage rings known as Synchrotrons. Information such as elemental and chemical composition and speciation of chemical bonds may be determined at micrometer and even nanometer scales using modern synchrotrons and techniques employing X-Ray Absorption Spectroscopy (XAS) ...
ByRayspec Ltd. based in Buckinghamshire, UNITED KINGDOM
Current practice acknowledges that a reduction in venous stasis of the lower limb reduces DVT incidence in acute stroke patients1. It is also recognised that DVT is a blood clot that most commonly forms in the deep veins of the ...
ByFirstkind Ltd based in High Wycombe, UNITED KINGDOM