Regenerative Thermal Oxidizer (RTO) for Coating Industry-Waste and Recycling
Organized emission <50 mg (non-methane total hydrocarbons); Energy saving, only use natural gas to start the furnace! Unorganized within the factory: non-methane total hydrocarbons <10mg/m3; After treatment, chimney emission indicators: nitrogen oxides <50mg/m3;
-
Oven cross ventilation
The low-concentration exhaust gas from the rear oven is sent to the fresh air inlet of the front oven as fresh air, and is generally not passed into the first 2-3 high-concentration ovens. This method can reduce the exhaust volume of the coating machine.
-
Coating head/glue room connected to oven in series
The low-concentration exhaust gas from the coating head/glue preparation room is sent into the fresh air inlet of the oven by a fan and used as fresh air for the oven (generally not passed into the high-concentration ovens in the first two sections). This method can reduce the exhaust volume of the coating head and glue preparation room, and avoid the low-concentration exhaust gas from entering the RTO to dilute the total concentration.