- Home
- Applications
- united kingdom
- protective equipment
Show results for
Refine by
Protective Equipment Product Applications In United Kingdom
3 applications found
Air or SO2 is dried with H2SO4 before being fed to the sulphur burner or converter. The Drying Tower can be under pressure or under suction, with the main gas blower being, respectively, in front of or after the tower. The physical limit of drying is 3 mg/SCF of gas as H2O (= 16 mg/SCF as H2SO4) Large particles (>3 microns) are mechanically entrained from the acid distribution system or packing, typically as a load of 500 – 750 mg/m3. As the Drying Tower operates at relatively low temperature, mist is ...
ByBegg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM
Process Information: SO3 gas is used in a sulphonation reaction process. Fibre filters which are installed after the sulphonation reactor remove up to 4,000 mg/m³ sulphonated hydrocarbon mist. Due to the high viscosity liquid produced with over sulphonisation, it is recommended (a) to have a stand-by filter unit in parallel, or (b) to have an irrigated demister unit in front of the fibre filters; in any case a Δp metered wash spray system is normal on the candle filters, and the vessel may be trace ...
ByBegg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM
Soter Analytics’ wearable safety devices and AI-driven training programs help to identify and prevent musculoskeletal disorders among construction ...
BySoter Analytics Ltd. based in London, UNITED KINGDOM