ball-valve Downloads
9 downloads found
In light of the increasing demand for alternative sources of clean energy, Habonim’s Cryogenic Ball Valve is certain to ensure Habonim’s position in the forefront of the energy ...
Steel, StelliteEnds: Flanged, weldSpecials: Stem extension, soft seating, jacketedCast & forged steel valves –cryogenic applicationComplies to BS 1873, BS EN ISO 15761 (BS5352), BS 6364, ASME B16.34Sizes: 15 mm (1/2") to 300 mm (12")Type: Gate, globeRating: Class 150, 300, 600, 800Materials: LCB, CF8, CF8MTrim: StelliteEnds: Flanged, weldSpecials: Extended bonnet, live loaded ...
The valve balls arestainless steel or monel. The stem is 17-4PH high tensilestainless steel.The seats are from PCTFE or NRG (Carbon filled PTFE) forlimited temperatures to -196°C (-321°F).The body seals and stem seals are PTFE or Graphite.CRYOGENIC VALVE SERIESAs an ISO 9001 certified manufacturer, Habonim is committedto the highest degree of ...
Engine components (cams, connecting rods, pistons, valves) ??Ball valves ??Parts for aerospace turbines ??Tool and die applications ...
All area and main line isolation valves shall be Ohio Medical® series. Valves shall be either locking or non-locking. The valves shall be oxygen cleaned, full port, three piece ball type with flanges to allow easy service and installation. The valve shall have a bronze body, and a blow-out proof stem. The valve ball shall be bronze chrome plated, and the seats and packing shall be ...
Further information on www.zavero.com ART. 88Twin ball DB&B valvesDouble block and bleed valve is a combination of two ball valves with a needle valve between. ...
series. No manual resetting of valves or levers shall be required. The unit shall switch from “Bank in Use” to “Reserve” bank without fluctuation in line delivery pressure. ...
60093)Dimension d 16 – d 500 in accordance to EN ISO 15494Pressure Rating Pipes/Fittings/Diaphragm and ball valves: d 16 – d 225 SDR11, PN10, c = 2.0 d 50 – d 225 SDR17.6, PN6, c = 2.0Butterfly valves: d63–d225, PN10 / d280, PN8 / d315, PN8Pipes/Fittings: d 250 – d 500 SDR11, PN10, c = 2.0d 250 – d 500 SDR17.6, PN6, c = 2.0Temperature Rating ...
System Specification PROGEF Standard (PP) page 8/ 25 Schaffhausen, July 2012 - System Specification - 6. Valves All PROGEF Standard (PP) valves shall be metric sizes manufactured by Georg Fischer Piping Systems or equal in accordance with EN ISO 16135, 16136, 16137, 16138, tested according to the same standard. 6.1 Ball ...