heating-and-cooling Downloads
15 downloads found
Premium
High Temperature Stable EDI for Pharmaceutical OEMs Now to 85°C. Key Benefits Include: Hot Water Sanitizable at 85°C / 185°F. 15 min up to 2 hrs (see USP recommendations). Rapid Heat/Cool Cycle — up to 160 cycles. New High Temperature FDA Urethane Materials. Pharmaceutical Stainless Steel (EXL option). Light, Compact, Easy to Ship and Handle. ...
Premium
Key Benefits Include: Hot Water Sanitizable at 85°C / 185°F. 15 min up to 2 hrs (see USP recommendations). Rapid Heat/Cool Cycle — up to 160 cycles. New High Temperature FDA Urethane Materials. Pharmaceutical Stainless Steel (EXL option). Light, Compact, Easy to Ship and ...
Premium
Hot Water Sanitizable at 85°C / 185°F. Rapid Heat/Cool Cycle - up to 160 cycles. New High Temperature FDA Urethane Materials. ...
Since heat is merely transferred from whereit’s generated to where it’s needed, operating costs arelowered even more than when GeoExchange is used just for heating and cooling the building interior.LESS MAINTENANCE,FEWER INTERRUPTIONSTraditional HVAC systems can be complexand costly to maintain. ...
MARIN-5Enhanced Nebulizer System for ICP-AES and ICP-MSCoupling a concentric pneumatic nebulizer with a heated spray chamber/desolvation system, the CETAC Marin-5 Enhanced Nebulizer System is a cost-effective solution for up to 5 times or more signal improvement for ICP-AES and ICP-MS. The CETAC Marin-5 Enhanced Nebulizer System consists of a conventional concentric pneumatic ...
Breathable fabric helps keep wearer cool and avoid heat stress. Recommended applications include mold remediation, manufacturing, industrial and ...
Breathable fabric helps keep wearer cool and avoid heat stress. Recommended applications include mold remediation, manufacturing, industrial and ...
Proprietary hybrid membrane fabric helps to keep wearer cool and avoid heat stress.. Recommended applications include manufacturing, emergency response, environmental cleanup and ...
DEENA96 is an automated digestion system that fully automates the dispensing of reagents into test tubes, as well as the heating and cooling steps in the digestion process. In metal and mercury analysis, manual sample preparation often consists of many steps that are labor intensive and time consuming. DEENA96 alleviates most of the manual sample preparation and reduces the errors associated ...
Samples can be agitated (shaken), lowered into a PTFE coated graphite block for heating, and raised for cooling. Final dilutions are accurately and precisely dispensed with a liquid level sensor. ...
Samples can be agitated (shaken), lowered into a PTFE coated graphite block for heating, and raised for cooling. Final dilutions are accurately and precisely dispensed with a liquid level sensor. ...
The oscillations disperse the sample into a fine aerosol, which is swept out of a spray chamber by a flow of argon gas from the host ICP-AES or ICP-MS instrument.The aerosol passes through a heated tube and an electrothermally cooled condenser. An integrated drain pump removes the condensed sample solvent and any excess sample liquid from the spray chamber.After ...
Ninhydrin pressure: maximum 24 bar Analytical Column High pressure PEEK column packed with Ultropac 8 cation exchange resin. Peltier heating/cooling system. Sample Injection 3 injection modes (full loop, partial loop and micro), 84 position autosampler. ...
Because ductless hoods recirculate the air within the room; no energy needs to be spent on heating or cooling make-up air. Sentry Air Systems offers both Standard and Custom Size Pharmaceutical Compounding HoodsStandard Sizes are:12” 18” 24” 30” 40” 50” 60” 70” [Width]STEP ONE: CONTAMINATED AIR IS RELEASEDFROM THE APPLICATION BEING PERFORMEDWITHIN THE HOOD.STEP ...
The IR Plus fusion machines use non-contact radiant heating. The cooling time for is calculated on the basis of ambient temperature and the bead surface temperature. To increase the cooling capacity, an additional cooling fan is included in the IR-225 Plus. ...