Show results for
Refine by
Gas Cylinder Storage Equipment & Supplies In Australia
39 equipment items found
Manufactured by:Ritter Dental USA based inSan Antonio, TEXAS (USA)
The Vanguard Dental Stool by Ritter Dental is a specialized seating solution tailored for dental professionals seeking both comfort and functionality in clinical environments. Featuring upgraded upholstery, the stool is designed to ensure ergonomic support during extended periods of use, minimizing discomfort and enhancing productivity. Its construction prioritizes durability and ease of ...
Manufactured by:eyeMobil Innovations based inBenton Harbor, MICHIGAN (USA)
The EPIC Surgeon's stool was developed to provide the ophthalmic surgeon or any surgeon who sits routinely during surgery the comfort and flexibility they are used to but in a mobile platform. This stool has been developed with the ability to transport it in a 15 pound bag to any location in the ...
Manufactured by:Borgo based inToronto, ONTARIO (CANADA)
The PG Series of work stools by Borgo epitomizes durability and functionality, making them well-suited for office, industrial, and healthcare applications. These stools feature molded self-skin polyurethane seats and backs that are resistant to liquids and easy to clean. Designed for ergonomic comfort, they promote good posture, catering to environments where long hours of sitting are standard. ...
Manufactured by:Health By Design based inNovato, CALIFORNIA (USA)
Attaches to the Salli Saddle Chair to provide versatile body and arm support for precision work. Recommended for surgeons, dental assistants, and sonographers. Also compatible with the Bambach Saddle Seat and similar saddle chairs. Also known as a dental assistant's arm, body support arm, belly bar, or surgeon's arm. ...
Manufactured by:Northgate Technologies, Inc. based inElgin, TEXAS (USA)
The NEBULAE SRS provides an enhanced operating environment, functioning intuitively and allowing surgical staff to focus on the procedure rather than equipment ...
Manufactured by:CHOICE MEDIQUIP based inHyderabad, INDIA
THREE Gases Anaesthesia machine O2 , N2o & Air three tubesTrolley made of M.S. multi colour Powder Coated finish with anti rust lacquer coatingGas Inlet Port O2 & N2 Each 2 nos. & Air 1 No. Pin-indexed gas cylinder Connections for O2 & N2O each 1nos. & diameter index gas specific Central Pipe Line Connection each 1No.for O2 , N2O, AirNitro-locking SystemAudio Visual Oxygen ...
Manufactured by:Behringer srl based inGenova, ITALY
Cylinder connection manifold made with a single brass manifold, with two or three places; specific gas connection; non-return valve built-in in the inlet connection. It is made of materials compatible with the gases and applicable standards in medical gas field. The identification takes place through the indication of the name and/or symbol of the supplied gas and the production batch stamped on ...
Manufactured by:Sechrist Industries, Inc. based inAnaheim, CALIFORNIA (USA)
Sechrist Standard Hyperbaric Chamber Gurneys are designed exclusively for all Sechrist Monoplace Hyperbaric Chambers. This exclusive design allows for easy patient transfers both in and out of a Sechrist Hyperbaric Oxygen Chamber. All Sechrist Hyperbaric Chamber Gurneys include a one-step locking mechanism for simultaneous locking of all wheels enhancing ...
Manufactured by:CryoConcepts, LP based inEaston, PENNSYLVANIA (USA)
The CryoLab Medical device is an advanced cryosurgical tool engineered for medical practitioners who specialize in treating abnormal skin lesions. It is designed with a cutting-edge omni-directional wand that provides flexibility and efficiency, allowing lesions to be treated from various angles. The tool includes a pre-set timer to optimize focus during treatments and features a cylinder level ...
Manufactured by:Behringer srl based inGenova, ITALY
Pressure regulator for cylinders, suitable for medical gases, equipped with dual pressure gauge to show high and low pressure, used on outlet of cylinders to reduce the pressure down to the line or equipment set.Maximum inlet pressure is 200 bar, the outlet pressure is adjustable up to 12 bar.The gas inlet connection is specific to the gas type, the outlet is fitted with an Ø 6 hose ...
Manufactured by:Behringer srl based inGenova, ITALY
Pressure regulator for cylinders, suitable for medical gases, equipped with dual pressure gauge to show high and low pressure, used on the outlet of cylinders to reduce the pressure down to the line or equipment set.Maximum inlet pressure is 200 bar, the outlet pressure is adjustable up to 12 bar.The inlet connection is specific to the gas type, the outlet is fitted with an Ø 6 hose ...
Manufactured by:Behringer srl based inGenova, ITALY
Pressure regulator for cylinders, suitable for medical gases, equipped with single pressure gauge to show cylinder pressure, used on cylinder outlets to reduce the pressure down to the line or equipment set.Maximum inlet pressure is 200 bar, the outlet pressure is adjustable up to 4 bar.The gas inlet connection is specific to the gas type, the outlet is fitted with a G1/4" M R connector.Its ...
Manufactured by:G.Samaras S.A. based inThessaloniki, GREECE
The cylinders decompression units are designed to supply medical gases (oxygen-nitrous oxide-air-nitrogen-carbon dioxide) to any type of medical gas network, where continuity of supply is essential and where the pipeline is supplied from manifold high pressure gas cylinders. They are complied with all current safety regulations and laws and are designed and tested to guarantee safe operation. ...
Manufactured by:MEDICOR Zrt based inBudapest, HUNGARY
Automatic warm-up. Pre-warm (33 oC) & Manual mode (0-100% in 5% increments). Surface temperature servo control (30-38 oC). Skin temp. servo control (32-38 oC increments 0.1 oC) with reusable sensor. Heavy duty stand with 4 castors (2 lockable, 150 mm). Protector bumpers on each side & handle on front. Foldable side walls (4 pcs, height 17,5 cm) w/ name plate. Tube ports & measure line ...
Manufactured by:GCE Healthcare based inSteinhausen, SWITZERLAND
Innovative self centering flow setting device with continuous flow between settings. In the unlikely event of indent mechanism failure, the patient will still be supplied by medicinal gas. The higher number of flow disc holes increases treatment options. Extra flow setting of 25 l/min on the traditional 15 l/min variant, allows use in resuscitation. ...
Manufactured by:Medical Electronic Construction (MEC) based inNivelles, BELGIUM
Lactotest 102 has been developed to provide quick and reliable diagnosis of gastro-intestinal disorders measuring carbohydrate breakdown deficiencies and/or malabsorption. Particularly efficient for lactose intolerance screening, the instrument also gives good indication of excessive bacterial growth in the gut and evaluates intestinal transit time. The electrochemical sensor with thermal ...
Manufactured by:Embitron s.r.o. based inVochov, CZECH REPUBLIC
The endoscopy tower is supplied in 2 special watertight packages, containers and a set of gas cylinders (CO2/ Argon) with a total weight of 150 kg. The containers can be delivered by any type of transport. This is a strong advantage for field hospital ...
Manufactured by:Skanray Technologies Ltd. based inMysore, INDIA
Advanced anaesthesia workstation with 3 gas pipeline and cylinder connectivity. 5 Tube Rotameter with Low Flow Technology. Multi-layered barotrauma protection. Pneumatic Anti-Hypoxia device with ratio control. Dedicated additional N2O cutoff. Independent Auxiliary O2 output. Circle absorber with soda lime capacity of 1.3 kg. Auto bypass facility for uninterrupted ventilation. Integrated ...
Manufactured by:Oxywise s.r.o. based inPieštany, SLOVAKIA
Produce gaseous oxygen from compressed air on site and offer a cost-effective, reliable and safe alternative to traditional oxygen gas supplies such as cylinders or cryogenic liquid. Our design is made for round the clock 24/7 operation. Each generator is equipped with automatic start&stop function, enabling the generator to start and stop automatically according to the ...
Manufactured by:Diamedica (UK) Ltd based inDevon, UNITED KINGDOM
Derived from the renowned Glostavent anaesthesia range, the Glostavent® Helix Duo incorporates the same key characteristics of the Glostavent® Helix with the additional advantage of two, low resistance, draw over vaporisers. The twin vaporisers permit the safe delivery of a gaseous induction using Sevoflurane before switching to the more cost-effective Isoflurane to maintain the ...