- Home
- Equipment
- canada prince edward island
- bone wedges for plate
Refine by
Bone Wedges For Plate Equipment & Supplies In Canada Prince Edward Island
43 equipment items found
Manufactured by:Bioteck S.p.A. based inArcugnano (Vicenza), ITALY
OSP-075P, Cancellous Wedge, 1 pc. 50 x 40 x 7,5 ...
Manufactured by:B.T. innovation GmbH based inMagdeburg, GERMANY
An essential criterion in the construction of structures is the concrete cover. This is an important issue on construction sites. To ensure that the final component has the prescribed minimum concrete cover after concreting, spacers are used on the construction sites. These now come in all shapes and varieties. You will also find a large selection of spacers in our online ...
Manufactured by:Hankil Tech Medical Co., Ltd. based inHwaseong-Si, SOUTH KOREA
The Hankil Locking Plate & Screw System is wide range of axially stable locking plates with locking screws designed to treat periarticular fractures. Hankil Locking Plate & Screw System offers advanced solutions for the management of comminuted fracture. The system combines anatomically contoured periarticular pates with locking screw ...
Manufactured by:Hankil Tech Medical Co., Ltd. based inHwaseong-Si, SOUTH KOREA
Fracture Application Part : Radius Optimal Fit , Screw Trajectory, Fully Instrumented System, Pre-contoured ...
Manufactured by:PuenHua (Changzhou) Pet Medical Co., Ltd. based inChangzhou, CHINA
Width 4.1mm Thickness 1.2mm，Total Width 19.3mm. Specification： 1.5mm Acetabular Plate, 2+2 ...
Manufactured by:Hankil Tech Medical Co., Ltd. based inHwaseong-Si, SOUTH KOREA
Optimal Fit. Precontoured Plates. Screw Trajectory. Thin profile towards the joint line. Fully Instrumented ...
Manufactured by:GPC Medical Ltd Orthopaedic Division based in, INDIA
The GPC bone plate bender large is used for bending the large fragment ...
Manufactured by:GPC Medical Ltd Orthopaedic Division based in, INDIA
The GPC Bone plate bender small is used for bending or contouring the small fragment ...
Manufactured by:AF Medical GmbH based inSpaichingen, GERMANY
The proximal head of the femur XLOC plate is anatomically precontoured and the curved shaft is designed to follow the natural shape of the femur ...
Manufactured by:Paragon 28, Inc. based inEnglewood, COLORADO (USA)
The Gorilla® Calc Fracture Plating System offers surgeons 20 total plates in three families to address fractures of the calcaneus. The system is made up of low profile lateral extensile approach plates as well as low profile sinus tarsi approach plates which may be contoured intraoperatively to the surgeon’s preference. All of the plates accept 2.7 mm, 3.5 mm, and 4.2 mm locking and ...
Manufactured by:Hankil Tech Medical Co., Ltd. based inHwaseong-Si, SOUTH KOREA
Fracture Application Part: Tibia, Optimal Fit, Screw Trajectory, Fully Instrumented System, Pre-contoured ...
Manufactured by:Hankil Tech Medical Co., Ltd. based inHwaseong-Si, SOUTH KOREA
Fracture Application Part Tibia: Optimal Fit, Screw Trajectory, Fully Instrumented System, Pre-contoured ...
Manufactured by:Medartis AG based inBasel, SWITZERLAND
1.6 mm thick plates with offset screw geometry in the shaft. Oblong hole for 2.8 mm cortical screws. Standard plate – three screw placements in the distal section of the plate. K-wire hole distally and proximally for temporary fixation with ...
Manufactured by:Zimmer Biomet CMF and Thoracic based inJacksonville, NEW JERSEY (USA)
A simple, yet comprehensive, system designed for stabilization and rigid fixation. The RibFix Blu Fixation System is designed to offer surgeons simplicity and ease of use when approaching rib fracture repair. RibFix Blu plates are engineered to match the natural shape of the ribs, offering stability for direct bone healing while considering the natural movement of the chest wall. Pre-contoured ...
Manufactured by:aap Implantate AG based inBerlin, GERMANY
The set comprises LOQTEQ® distal tibia plates for medial and anterolateral application as well as lateral distal fibula plates. Number and placement of plate holes as well as the screw trajectories are designed for treatment of a wide range of fracture types. The distal design respects the minimal soft tissue coverage and helps preventing potential irritation due to implant ...
Manufactured by:HCM Orthocare Pvt. Ltd. based inAhmedabad, INDIA
This Plate system is intended for use in fixation of fractures in the proximal femur. This system is also indicated for use in the trochanteric, pertrochanteric and intertrochanteric and basilar neck ...
Manufactured by:Ortho-Medical GmbH based inDuerbheim, GERMANY
ORLOS_II LOckING PLATE SYSTEM 4,5 - 5.0 MM • Angular stable • Locking or compression • Support biological osteosynthesis in case of osteoporotic bone and multiple fractures • Excessive torque is not applied to the cortical bone • Self-tapping locking screws • The bonefragments are are reliably fi xed in the position assumend at the time the screws are locked • ...
Manufactured by:Shukla Medical based inSt. Petersburg, FLORIDA (USA)
A universal extraction system intended to efficiently remove knee implant hardware manufactured by a wide range of orthopedic ...
Manufactured by:Hankil Tech Medical Co., Ltd. based inHwaseong-Si, SOUTH KOREA
Fracture Application Part : Femur, Optimal Fit, Screw Trajectory, Fully Instrumented System, Pre-contoured ...
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
The MetaCun™ II and DuoMetaCun™ II plates are osteosynthesis locking plates for dorsal fixation of mid and rearfoot arthrodesis procedures. Merete’s updated system utilizes a novel long-hole compression slot mechanism that compresses the fusion site through the displacement of bone fragments underneath the plate. A DIA 3.0 mm compression screw that glides along the ramp in the ...