- Home
- Equipment
- faroe islands
- cryogenic system
Show results for
Refine by
Cryogenic System Equipment & Supplies In Faroe Islands
24 equipment items found
Manufactured by:Polaris Srl based inMisinto (MB), ITALY
Gas purification systems with highest yield and quality ...
Manufactured by:KGW-Isotherm Karlsruher Glastechnisches Werk - Schieder GmbH based inKarlsruhe, GERMANY
KALTGAS is a tempering system that utilizes the very low temperature of liquid nitrogen as a cooling agent. The Jet vaporizes the liquid nitrogen in a cryogenic container, producing a steady cryogenic gas flow. This LN2 vaporizer (Jet) can be adjusted to minimize liquid nitrogen consumption and to adjust both the cooling rate and the volume of ...
Manufactured by:Polaris Srl based inMisinto (MB), ITALY
A reliable solution for VOC treatment, combining environmental sustainability and total cost of ...
Manufactured by:Froilabo - Techcomp Group based inMeyzieu, FRANCE
The stainless-steel Voyager inventory racking systems are designed for reliable and efficient long term sample storage. Samples may be stored in a liquid or vapour phase when equipped with the appropriate inventory control. There are 4 available models, enabling the storage of up to 38,350 samples (Model 38K). The large, hinged lid allows easy access to all of the sample racking and enables easy ...
Manufactured by:Froilabo - Techcomp Group based inMeyzieu, FRANCE
The stainless-steel Polaris inventory racking systems are designed for long-term sample storage applications. Unlike traditional cryogenic storage that immerses samples in liquid nitrogen, or vapour storage systems where samples are housed above a liquid reservoir, Polaris is a truly dry storage system. A nitrogen jacket ...
Manufactured by:Froilabo - Techcomp Group based inMeyzieu, FRANCE
The stainless-steel Origin inventory racking systems are ideal for long-term sample storage applications where temperature stability and sample security are required. They may be operated in liquid or vapour phase and feature highly efficient units with low LN2 consumption and extremely stable near-liquid temperatures at the top of the inventory chamber. Available in 5 models, with the largest ...
Manufactured by:CRYO.TAS, by IWB Ingenieurbüro Wolfgang Bauer based inEgling, GERMANY
CRYO.TAS was specially designed to fulfill all requirements for automated filling of cryogenic air gases, CO2 and gaseous H2. A tailor-made product for the gas industry. ...
Manufactured by:Froilabo - Techcomp Group based inMeyzieu, FRANCE
The Antarctica HC series is designed for high capacity, long term cryogenic sample storage. Featuring a numbered index ring and tapered internal canister locator. Universal canister compatibility with 7 models ...
Manufactured by:Froilabo - Techcomp Group based inMeyzieu, FRANCE
The Arctic XT series is designed for the everyday requirements of a laboratory or biorepository. Perfect for long term sample storage thanks to the exceptional extended hold times. Universal canister compatibility with 5 models ...
Manufactured by:Froilabo - Techcomp Group based inMeyzieu, FRANCE
The aluminium Vapour Shippers are designed for the safe transport of biological samples in a convenient and suitable container. Complies with IATA regulations for open cryogenic receptacles. The samples are stored within the vapour phase and the lightweight aluminium construction makes the vessels portable and helps to keep transport costs low. With 5 models available, the vessels can store ...
Manufactured by:Meyer Tool based inOak Lawn, ILLINOIS (USA)
The custom cryogenic distribution boxes, also known as cold boxes, are tailor-made by Meyer Tool to meet the specific requirements of industries like particle accelerators and various industrial process systems. These specialized boxes are designed to handle extremely low temperatures and house cryogenic components and fluids that are essential ...
Manufactured by:Generant Inc. based inButler, NEW JERSEY (USA)
The Generant Series Brass CRV, Cryogenic Relief Valve is a spring reference over pressure protection device. The CRV incorporates Generant’s exclusive “Dirt Guard” feature which increases the valves ability to tolerate particulate contamination. This device is ideally suited for use as a “Blocked Line Safety” in cryogenic ...
Manufactured by:Cryolor based inEnnery , FRANCE
Cryolor's Thermosiphon Cryogenic Tanks (RVT) are ingeniously engineered for cryogenic filling stations handling liquefied nitrogen, oxygen, argon, and even Liquified Natural Gas (LNG). These tanks are meticulously designed to minimize gas losses and reduce pump maintenance costs, integrating vacuum insulation and a choice of single, double, or triple thermosiphon ...
Manufactured by:CryoWorks, Inc. based inJurupa Valley, CALIFORNIA (USA)
CryoWorks cryogenic valves and accessories are designed and fabricated to exceed the highest industry standards. Our valves are available vacuum insulated and non-insulated and are used in piping systems, tank withdrawals, control manifolds, valve boxes, helium transfer lines, flexible transfer lines, dewars, e-stop controls, and other cryogenic ...
Manufactured by:MR Solutions based inGuildford, UNITED KINGDOM
The MRS*PET INSERT, designed by MR Solutions, facilitates simultaneous PET/MR imaging, enabling the acquisition of multi-parametric information from the same subject with precision. Built to integrate seamlessly with cryogen-free MR systems up to 9.4 Tesla, it offers flexibility in research settings due to its removable nature. This product can function ...
Manufactured by:ASG Superconductors based inGenoa, ITALY
Superconducting technologies and magnets are increasingly finding application in medical diagnostics and therapies. Capitalizing on skills and experiences derived from research and industrial collaborations, ASG is constantly improving its competences and is able to design and build the following types of magnets for medical ...
Manufactured by:Gulf Process Gases, LLC based inHouston, TEXAS (USA)
Cryogenic Gases Storage Tanks: N2, O2, Ar, H2, Co2 Cryo-Storage, Liquefied Natural Gas, Vaporization Units, Liquid Pumps And Pressure Boosters. Gulf Gases can provide your business operations with premium, new or fully-refurbished cryogenic storage vessels. All of our tanks come with a 10-year Warranty. Our experts will specify the right-sized cryo-storage ...
Manufactured by:Ability Engineering Technology, Inc. based inSouth Holland, ILLINOIS (USA)
AET Designs and Manufactures vacuum jacketed transfer lines for the cryogenic industry. This application is utilized to transfer gases/liquids with a low boiling point while shielding them from atmospheric interference. These piping assemblies can also include Flex Segments to help with customer connection point alignment.Transferring cryogenic liquid without vacuum jacketing can cost a large ...
Distributed by:LOT-QuantumDesign based inDarmstadt, GERMANY
We offer cryogenic temperature monitors with eight, four and two multipurpose input channels, supporting diode, platinum RTDs and all other cryogenic resistor temperature sensors, including an optional dual thermocouple input. The temperature range (between 500 mK and 1500 K) depends on the sensor type. A constant voltage AC sensor excitation is used for the extended-range use of negative ...
Manufactured by:Tempshield Inc based inMount Desert, MAINE (USA)
Hand Protection for Industrial Settings working with LNG or Liquid Nitrogen. Gloves are designed to provide a high level of thermal and splash protection where the exposure to cryogenic fluids might exist. State-of-the art materials and a multi-layered construction allow for a maximum level of thermal protection, flexibility, and dexterity which are essential features when function is important ...