Show results for
Refine by
Mechanical Ventilation Equipment & Supplies In Iran
58 equipment items found
Manufactured by:MTTS Co., Ltd. based inHanoi, VIETNAM
Impala ventilator is an invasive mechanical ventilator with 8 ventilation modes ACVCV, AC-PCV, SIMV-VC, SIMV-PV, VCV/ PS, PCV/PS, CPAP, BiPAP and HFNC intended to use in intensive care units or transportation of emergency patients. The device contains a built-in pump, blender, flow, and pressure sensors that allows oxygen-rich ...
Manufactured by:IngMar Medical based inPittsburgh, PENNSYLVANIA (USA)
Supporting the efforts of a spontaneously breathing patient is critical in mechanical ventilation. New ventilator modes continually strive to perfect the interaction with the patient. Training to fully utilize these modes requires simulating spontaneous ...
Manufactured by:Tecme based inAgustín Tosco, ARGENTINA
High-end mechanical ventilator that provides invasive and non-invasive ventilation, adaptable to any patient ...
Manufactured by:Biosys based inAnkara, TURKEY
Biyovent ICU Ventilator makes a difference in the ventilation process with its unique specifications. Biyovent ICU Ventilator, has been carefully thought with every detail of the ventilators and developed with a holistic approach. Prepared for mass production in cooperation with Arçelik, Baykar and Aselsan. Biyovent adds value to ventilation technology with its modern and ergonomic design, ...
Manufactured by:Pharmapex Group based inSan Diego, CALIFORNIA (USA)
We offer a broad range of clinically differentiated ventilation solutions, leveraging our advanced technologies across the continuum of care. Our mechanical ventilation solutions help enhance patient care, optimize workflow efficiencies and support best practice ...
Manufactured by:Medline Industries, LP based inNorthfield, ILLINOIS (USA)
The MICRO MIST* nebuliser produces a fine, dense mist at angles up to 90° with optimal particle size, efficient nebulisation rates and minimal residuals. Configurations for mechanically ventilated patient are also ...
Manufactured by:aXcent medical GmbH based inKoblenz, GERMANY
Top notch Performance of Non-Invasive and Invasive Ventilation for all Patient Categories. LYRA x2 is a premium non-invasive turbine driven ventilator with no compromise on the performance in invasive ventilation. User can easily switch between NIV- and IV-modes by UI operation only. Comprehensive parameter monitoring describes the full scenario ...
Manufactured by:Tecme based inAgustín Tosco, ARGENTINA
The device is used for heating and humidifying gases delivered to patients that need invasive and non-invasive mechanical ventilation through endotracheal/tracheostomy tubes or a face mask, respectively. It can adjust up to nine levels of temperature and humidity. ...
Manufactured by:Respiratory Research, Inc. based inAustin, TEXAS (USA)
Exhaled Breath Condensate Collection from Intubated and Mechanically-Ventilated Patients in the ICU. The RTubeVENT™ breath condensate collection device is designed for ease of use in the ICU. It can be placed in-line in the expiratory limb of the breathing circuit or at the ventilator exhaust port. This non-invasive handheld device is ...
Manufactured by:Bioxigen - Skill Group S.r.l. based inCologna Veneta (Verona), ITALY
Designed and completely stainless steel manufactured, they are the ideal products for the use in the industrial environment. They present a series of Bioxigen condensers inside and a silent mechanical ventilation for an even more efficent sanitizing action. It is an indispensable means of preventing bacterial contamination, essential and effective, made entirely ...
Manufactured by:B&B Medical Technologies based inCarlsbad, CALIFORNIA (USA)
The management of the tracheotomized patient supported with mechanical ventilation through a cuffed tracheostomy tube constitutes one of the clinician’s greatest responsibilities. Most patients that require a tracheostomy will need full to partial ventilatory support. There are several factors that need to be taken into consideration to ensure adequacy of ...
Manufactured by:Henan Tuoren Medical Device Co., Ltd. based inChangyuan County, CHINA
Product introduction: Closed suction catheter is designed for removal of bronchial secretions in intubated patients if they are on mechanical ventilation. The system is to provide safe and simple access to patient’s airway without disconnecting the mechanical ventilation and prevents cross-contamination. Scope of ...
Manufactured by:La-med Healthcare Pvt. Ltd. based in, INDIA
Designed to be used for general anesthesia, intensive care and emergency medicine for airway management and mechanical ventilation. Naso-oral tip for Nasal/Oral ...
Manufactured by:Omnidermal Biomedics srl based inSolignano, ITALY
ABU is a CE-marked medical device that transforms the traditional AMBU device into a real mechanical ventilator, for ICU, through the implementation of advanced flux and pressure sensors and a high-precision feedback system. ABU can be used for both invasive and non-invasive ventilation. ...
Manufactured by:B&B Medical Technologies based inCarlsbad, CALIFORNIA (USA)
Sturdy, efficient device stabilizes ventilator connector; stabilizes in-line suction devices, too. The management of the tracheotomized patient supported with mechanical ventilation through a cuffed tracheostomy tube constitutes one of the clinician’s greatest responsibilities. Most patients that require a tracheostomy will need full to ...
Manufactured by:Sterimed Group based inNew Delhi, INDIA
The Sterimed endotracheal tube is made from non-toxic, non-irritant, medical grade clear PVC. The endotracheal tube, also known as the ET tube is used to maintain a patent airway and mechanically ventilate patients. The Sterimed endotracheal tube is kink resistant, thin-walled, thermo-sensitive tube, softens at body ...
Manufactured by:Sterimed Group based inNew Delhi, INDIA
Used to maintain a patient airway and mechanically ventilate patients, Made from a special non-toxic PVC coated with silicon elastomer which forms a bonded film over this tube and balloon. 100% Phthalate free. The tube is coated with non-stick, self-lubricating Silicon elastomer ( Elastosyl) which forms a thin film on the surface. ...
Manufactured by:EVA Therapeutics, Inc. based inOsaka, JAPAN
In critically ill patients with respiratory failure, mechanical ventilation and extracorporeal membrane oxygenation are used as standard treatments to provide vital oxygenation. However, in general, their use requires advanced medical resources and highly invasive procedures, potentially making the some of the patients contraindicated. ...
Manufactured by:Beijing Yaguo Technology Co., Ltd. based inDaxing District, CHINA
The bionic cough simulator is applied to patients with invasive mechanical ventilation. It assists patients with effective expectoration by simulating actual coughing mechanism of human being. The unique air path and algorithm design provide seamless compatibility with ventilators. Features of the bionic cough simulator include ...
Manufactured by:DEAS S.R.L. based inCastel Bolognese (RA), ITALY
Humidification and warming of inspired gas during mechanical ventilation are essential in the neonate. Adequate inspired gas temperatures are associated with a lower incidence of pneumothorax and a decreased severity of chronic lung disease in ventilated very low birth weight infants. Critically ill neonates are commonly managed in incubators or ...