- Home
- Equipment
- luxembourg
- cannulated hcs screw
Refine by
Cannulated Hcs Screw Equipment & Supplies In Luxembourg
44 equipment items found
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
The Merete® Cannulated HCS (Headless Compression Screws) are self-drilling/self-tapping, dual pitched screws with a threaded head which can be countersunk into the bone. The screws are available in diameters of 3.0 mm, 4.3 mm and 6.5 mm in various ...
Manufactured by:Medartis AG based inBasel, SWITZERLAND
Plate has a combination of 2.8 and 3.5 mm screws. 20° posterior-anterior oblong hole and round hole with recess for syndesmotic screw fixation. Eight 2.8 Trilock screws in the thinner distal section. 2.8 mm flap for fixation of Wagstaffe fragment. ...
Manufactured by:Clariance SAS based inBeaurains, FRANCE
DESIGNED TO INSPIRE CONFIDENCE: Dual-lead screws, snap-on set screws and friction fit screwheads increase speed while enhancing control throughout the procedure. MULTIPLE SCREW OPTIONS: Polyaxial screws, reduction screws and cannulated screws are available to accommodate any surgeon’s preference. CONTROLLED ROD REDUCTION: Gradual rod reduction is achieved with the Persuader which easily ...
Manufactured by:Paragon 28, Inc. based inEnglewood, COLORADO (USA)
The Mini-Monster® Screw System is a cannulated screw system containing headed and headless 2.0 mm, 2.5 mm, 3.0 mm, 3.5 mm and 4.0 mm screws. Every detail was scrutinized that went into the design of these screws–emerging with a screw that comes with a “Monster” bite and a noteworthy amount of options. We set the goal of being inclusive and respectful of individual ...
Manufactured by:BioPro, Inc based inPort Huron, MICHIGAN (USA)
Manufactured by:Biedermann Motech GmbH & Co. KG based inVillingen, GERMANY
40° Polyaxial locking. Strong & consistent locking at every angle. Low profile construct. Compression before locking. ...
Manufactured by:BioPro, Inc based inPort Huron, MICHIGAN (USA)
The HBS Headless Cannulated Compression Screw System features screws 2.5mm and 3.0mm screws with various cutting tip styles available. The 2.5/3.5 and 3.0/3.9mm self-tapping (ST) only screws feature self-tapping tips that maximize thread length for use in small bones. The 2.5/3.5mm and 3.0/3.5mm self-drilling and self-drilling (SDST) screws eliminate the need for pre-drilling. ...
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
The self-drilling and self-tapping Merete® Cannulated PCS Screws are made of titanium alloy (Ti6AI4V, DIN EN ISO ...
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
Merete’s Chronoceptor™ reduces screw implantation time and eliminates back table hand-offs by combining k-wire, pilot drill, countersink and length gauge into a single sterile instrument. Designed for use with Mecron™, the original cannulated screw system. Chronoceptor™ streamlines your OR by simplifying common AO techniques and eliminating many of the instrument hand-offs ...
Manufactured by:Elos Medtech. based inRosenheim, GERMANY
Advanced manufacturer of medical screws: We are an advanced manufacturer of medical screws for both orthopedic and dental applications. In close cooperation with customers, we develop and manufacture several cutting-edge products. By applying our precision techniques and development expertise to this demanding product line, we can help make orthopedic screws part of your competitive ...
by:Covision Medical Technologies Ltd. based inWorksop, UNITED KINGDOM
The trauma portfolio from Covision includes a very broad range of titanium plates and screws for almost every indication. The set includes locking, reconstruction and compression plates with a variety of compatible ...
Manufactured by:Precision Edge Surgical Products based inSault Sainte Marie, MICHIGAN (USA)
Go ahead. Challenge us with an incredibly demanding thread form. Not only can we produce solid and cannulated implantable screws and bone taps in diameters ranging from 1-6 mm in lengths up to 16 inches, but we use product-simulation software to show you pre-production review of thread forms. It’s all part of the process that requires us to consider quality above all. We will make the ...
Manufactured by:The Orthopaedic Implant Company (OIC) based inReno, NEVADA (USA)
According to CDC data, hip fractures are the most serious and costly fall-related type of fracture. The OIC Hip Nail System is a smart solution for the new world of healthcare, demanding clinical excellence at a bottom line that keeps our heads above water. As the core of OIC’s hip fracture solution portfolio, the Hip Nail System boasts unparalleled value and uncompromising quality in ...
Manufactured by:OrthoPediatrics Corp. based inWarsaw, INDIANA (USA)
OrthoPediatrics is pleased to launch the next generation Cannulated Screw System! The new system is available in multiple screw diameters including: 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm and 5.5mm. For each configuration, all screws and instruments are housed in one case/tray – giving the added convenience of an “all-in-one” set. The upgraded instrumentation, and color-coding aid in ...
Manufactured by:Medartis AG based inBasel, SWITZERLAND
Sharp screws to cover numerous areas of use across upper and lower limb due to patented SpeedTip polygonal geometry, precise and sharp thread, optimized cutting geometry. Self-holding porperties beween screw and screwdriver due to patented ...
Manufactured by:The Orthopaedic Implant Company (OIC) based inReno, NEVADA (USA)
OIC’s Cannulated Screw System is designed to provide hospitals and surgery centers a versatile, high quality and cost effective solution for cannulated screw implants and instruments. Manufactured at the same facilities and from the same raw materials as the leading brands, OIC’s Cannulated Screw System delivers high quality implants and instruments at a fraction of the cost. ...
Manufactured by:Boneunion Medical based inXiamen City, CHINA
The Standard Washer for Cannulated Screws is an integral component of Boneunion Medical's Cannulated Screw System, designed specifically for use with 4.0mm and 6.5/7.3mm cannulated screws. This washer, constructed from high-performance Ti-6Al-4V titanium alloy, ensures durability and reliability in medical applications, providing necessary support and stability to the screw system. The washer for ...
Manufactured by:Alliance Spine based inSan Antonio, TEXAS (USA)
The Cannulated Aspiration Screw consists of a Cannulated Aspiration Screw, Stylet and Luer Lock. The luer lock is intended to allow bone marrow biopsy/aspiration. The components of this device are composed of surgical grade stainless steel per ASTM ...
Manufactured by:Aditus Medical GmbH based inBerlin, GERMANY
Ti-6AI-4V ELI (ISO 5832-3) Titanium Alloy Material; Anodized Coloring for Different Product Dimensions; Two Times Stronger Adhesion thanks to Special Conical Thread Structure; Non-guided Use with Self-Tapping Feature; Easy and Safe Instrumentation; Body Profile Compatible with Rod Diameters of 5,5mm and 6mm; Low,Medium and High Profile Options; Cannulated Poliaxial and Monoaxial Screw Options; ...
Manufactured by:AF Medical GmbH based inSpaichingen, GERMANY
The femur XLOC plate proximal is an anatomically pre-formed plate and intended for fractures of the proximal femur and the trochanter part. The plate combines four types of screws and is designed for the left and right femur in order to cover different femur neck ...