- Home
- Equipment
- st kitts nevis
- hospital admissions and air
Show results for
Refine by
Hospital Admissions And Air Equipment & Supplies In St Kitts Nevis
89 equipment items found
Manufactured by:Bay Corporation based inWestlake, OHIO (USA)
Our Schrader®-Style Quick Connects have been designed and engineered to be interchangeable with the original equipment manufacturer’s design in function, quality, and appearance along with some additional changes unique to Bay Corporation. The adaptors, which are offered in swivel and non-swivel, have a Chrome-plated brass body and a stainless steel high-flow nose for strength and ...
Manufactured by:DEXTHER MEDICAL based inMeaux, FRANCE
Medical air connector AFNOR for medical gases. AFNOR ( french ...
Manufactured by:Allied Motion, Inc. based inAmherst, NEW YORK (USA)
Allied Motion offers several brushless motor drives to power our motors. The cost-effective single-axis SXD brushless motor drive is respectively, DC-fed and AC-fed full-featured servo drives. Both are compact, modular units able to precisely control motor torque or velocity. The SXD is rated up to 1000 W continuous and the xDrive can provide up to 4.4 kW continuous. Our patented DPFlex™ II ...
Manufactured by:Genstar Technologies Company, Inc. based inChino, CALIFORNIA (USA)
Features: Medical Air use. Aluminum body with brass high pressure chamber. 3000 psi maximum inlet pressure. 1-1/2” diameter UL-listed gauge. Complies to CGA standards. Internal relief valve. Hose barb outlet. Piston design regulator. Sintered bronze inlet filter for longer service life. Easy to read flow rate window. Available in 0-8L, 0-15L and 0-25L. Available in CGA 326 and ...
Manufactured by:Bay Corporation based inWestlake, OHIO (USA)
Our Chemetron®-style Quick Connects, also known as NCG Quick Connects, have been designed and engineered to be interchangeable with the original equipment manufacturer’s design in function, quality, and appearance along with some additional changes unique to Bay Corporation. Our Chemetron®-style adaptors are equipped with a stainless steel striker to ensure strength and durability. ...
Manufactured by:Penlon Limited based inAbingdon, UNITED KINGDOM
Twin Flowmeters available in Oxygen or Air configurations. O2 or Medical Air. 0 – 15 L/min standard flow rate. Pressure compensation prevents back pressure build up on flow indicator. Incorporates static charge dissipation device to ensure accurate readings. Available with either a BS EN 737 probe, ¹⁄8 " NPT Universal thread or ³⁄8" BSP connector. Tubing nipple or ...
Manufactured by:Bay Corporation based inWestlake, OHIO (USA)
Our Ohmeda®-style Quick Connects, also known as Ohio and Diamond Quick Connects, have been designed and engineered to be interchangeable with the original equipment manufacturer’s design in function, quality, and appearance along with some additional changes unique to Bay Corporation. Our Ohmeda®-style adaptors have a stainless steel nose and sleeve for durability, and a high flow ...
Manufactured by:Bay Corporation based inWestlake, OHIO (USA)
Our Puritan®-style quick connects, also known as GEO and Geometrical Quick Connects, have been designed and engineered to be interchangeable with the original equipment manufacturer’s design in function, quality, and appearance along with some additional changes unique to Bay Corporation. The adaptor has a stainless steel construction for strength and durability, and stamped gas ...
Manufactured by:EKOM-AIR GmbH based inAhrensburg, GERMANY
Medical compressor DK50 DS - SMART is the source of modern, clean and quiet compressed air for medical devices. The 1 cylinder aggregate is available with compressor efficiency of 40 l./min., 50 l./min. and 60 l./min. This model has a dew point below ambient temperature by condensation or can be equipped with membrane dryer as option. A display shows the operating pressure, the operating hours ...
Manufactured by:EKOM-AIR GmbH based inAhrensburg, GERMANY
Medical compressor DK50 DE – EASY LOW FLOW is the source of modern, clean and quiet compressed air for medical devices. The 1 cylinder aggregate is available with compressor efficiency of 20 l./min. This model has a dew point below ambient temperature by condensation or can be equipped with membrane dryer as option. The output pressure and operating hours are visible at the outside of the ...
Manufactured by:Foshan Hongfeng Co.,Ltd. based inFoshan, CHINA
The nebulizer should be cleaned after each use and disinfected after every other treatment. Since you are breathing the vapor from the machine, it must be clean. If the machine is not cleaned correctly, bacteria and other germs could grow inside ...
Manufactured by:EKOM-AIR GmbH based inAhrensburg, GERMANY
Medical compressor DK50 DE - EASY is the source of modern, clean and quiet compressed air for medical devices. The 1 cylinder aggregate is available with compressor efficiency of 40 l./min., 50 l./min. and 60 l./min. This model has a dew point below ambient temperature by condensation or can be equipped with membrane dryer as option. The output pressure and operating hours are visible at the ...
Manufactured by:Patterson Scientific based inWaukesha, WISCONSIN (USA)
The “PAM” is engineered to be lightweight, portable, versatile and easy to operate. Investigators and practitioners can easily carry this balanced device from room to room or even out into the field for special procedures. The “PAM” is designed for use with non-rebreathing systems including the Bain Style Non-Rebreathing Circuit ...
Manufactured by:Zxmed PPE LLC based inXiantao City, CHINA
This black face mask is a great way to protect yourself and others from airborne particles and germs. As one of the best face masks, it has been designed with four layers of protection, including a melt-blown inner layer and hot air cotton outer layer. These materials are lightweight and breathable, with an air permeability of 95%, making them suitable for long-term wear in non-medical settings. ...
Manufactured by:Pattons Medical based inCharlotte, NORTH CAROLINA (USA)
Oil-less Scroll technology by Hitachi - Quiet, smooth running, long lasting, proven technology. Fully compliant with the latest NFPA 99 standards - Easy installation and certification. HMI display - Accurate performance information, touch screen control, complete service data. UL listed NEMA 12 control panel - Safe, reliable, easy to service or troubleshoot. No vibration - No special installation ...
Manufactured by:Sumit Surgical Industries based inNew Delhi, INDIA
Owing to our experience of the domain, we provide the finest quality of air compressor. Ideal air source for various kinds of ventilators, the air compressor is equipped visual alarm and audible alarm. Used for delivery of clean and dry compressed air in the ventilators, the air compressor is known for dehydration ...
Manufactured by:Vapotherm based inExeter, NEW HAMPSHIRE (USA)
The Q50 Compressor enables delivery of high velocity therapy in all areas of the hospital, even when wall air is not ...
Manufactured by:Advanced Orthopaedics based inHarleysville, PENNSYLVANIA (USA)
INDICATIONS: Sub-acute ankle sprains, chronic ankle instabilities or prophylactic use. ...
Manufactured by:Monaghan Medical Corporation based inPlattsburgh, NEW YORK (USA)
The AEROECLIPSE® XL R BAN™ Nebulizer only creates aerosol when you take a breath in. When you are exhaling or if you take a break in your treatment, the mist will stop. This means your medication stays in the cup until you are ready. Continuous output nebulizers create a mist whether you are breathing or not, releasing medication to the air around you. The mist particles that are ...
Manufactured by:EKU Elektronik GmbH
based inLeiningen, GERMANY
In 2019 the CALIBSO Family will be complemented by the additional modules LeakHunter O2/AIR and LeakHunter N2O. Thus the CALIBSO now also is a universal testing device for leakage tests of medical gas extraction points for AIR (medical compressed air), O2 (oxygen) and N2O (laughing gas) in hospital technology and in rescue and ambulance ...