- Home
- latamerica
- Equipment
Refine by
Locations
- Latin America
- Antigua & Barbuda
- Argentina
- Aruba
- Bahamas
- Barbados
- Belize
- Bolivia
- Brazil
- Cayman Islands
- Chile
- Colombia
- Costa Rica
- Cuba
- Dominica
- Dominican Republic
- Ecuador
- El Salvador
- Grenada
- Guatemala
- Guyana
- Haiti
- Honduras
- Jamaica
- Mexico
- Netherlands Antilles
- Nicaragua
- Panama
- Paraguay
- Peru
- Puerto Rico
- St. Kitts & Nevis
- St. Lucia
- St. Vincent & The Grenadines
- Suriname
- Trinidad
- Uruguay
- Venezuela
Coatings2go Medical Equipment & Supplies In In Latin America
4 equipment items found
Manufactured by:Coatings2Go LLC based inCarlisle, MASSACHUSETTS (USA)
REACH and European Med Device Regulation friendly alternative to 8-3C, formulated without ...
Manufactured by:Coatings2Go LLC based inCarlisle, MASSACHUSETTS (USA)
Crosslinker A is used in all the coatings and primers for improved durability and adhesion. While the Crosslinker is quite shelf-stable, it should be flushed after opening with a dry non-reactive gas after opening, such as nitrogen or ...
Manufactured by:Coatings2Go LLC based inCarlisle, MASSACHUSETTS (USA)
Primer 5-017 has found utility on Pebax and Nylon and some other low surface energy substrates/plastics. See our Instructions for Use Primer page for more info. The product is supplied as a kit with Crosslinker A for improved strength and adhesion. ...
Manufactured by:Coatings2Go LLC based inCarlisle, MASSACHUSETTS (USA)
Crosslinker B Concentrate is the active material in Crosslinker B without the diluent solvent. The diluent is what absorbs the moisture and causes eventual viscosity build on the shelf. B concentrate for the coating batch should be pre- mixed 1/1 with NMP (or acetone/inactive ketone, see Topcoat IFU) before adding to the batch. It is then equivalent to Crosslinker B in the instructions for use. ...