- Home
- north america
- Equipment
Refine by
Micro Medical Equipment Supplied In North America
26 equipment items found
Manufactured by:Micrins, Brand of Renaissance Surgical, Inc. based inLake Bluff, ILLINOIS (USA)
Pointed tips for fine trimming. Ultra sharp serrated blade designed to limit tissue slippage. Excellent for nerves. 8mm diameter round handles. Blades are 13mm in length measured from screw to tip. Individually ...
Manufactured by:Micrins, Brand of Renaissance Surgical, Inc. based inLake Bluff, ILLINOIS (USA)
Rounded tips for safe dissection. Ultra sharp blades provide precise cutting action. 8mm diameter round handles. Blades are 13mm in length measured from screw to tip. Individually ...
Manufactured by:Micrins, Brand of Renaissance Surgical, Inc. based inLake Bluff, ILLINOIS (USA)
Rounded tips for safe dissection. Ultra sharp serrated blade designed to limit tissue slippage. 8mm diameter round handles. Blades are 13mm in length measured from screw to tip. Individually ...
Manufactured by:Dymax based inTorrington, CONNECTICUT (USA)
The Micro-Dot™ hand-held syringe dispenser delivers accurate and consistent fluid deposits from pre-packed 3, 5, and 10 mL disposable syringes. This portable syringe dispenser can be set to dispense a wide range of fluid shot volumes. Once a volume is set, the positive displacement design allows it to be repeated indefinitely with acute consistency. The Micro-Dot manual syringe dispenser is ...
Manufactured by:MGC Diagnostics Corporation based inSaint Paul, MINNESOTA (USA)
The MICRO 6000 is an economical choice for basic spirometry, clinical trials or simple office spirometry. COMPLETE BASIC SPIROMETRY: Including Forced Vital Capacity, Slow Vital Capacity, Maximum Voluntary Ventilation and Minute Tidal Ventilation including bronchochallenge testing ...
Manufactured by:ErtelAlsop based inKingston, NEW YORK (USA)
The pharmaceutical and biotech markets require a high level of functional consistency from filtration products. To provide a higher level of confidence for these customers, ErtelAlsop drafted its Drug Master File and submitted it to the FDA Center for Drug Evaluation and Research. ErtelAlsop manufactures all filter pads to very high standards, and the Drug Master File provides the documentation ...
Manufactured by:Micro-Tech Endoscopy USA based inAnn Arbor, MICHIGAN (USA)
With our wide selection of cost-effective disposable biopsy forceps, you are perfectly equipped for every procedure. The Micro-Tech biopsy forcep is available with jaw diameters of 1.8 mm, 2.3 mm, and 3.0 mm, and is offered in Oval, Serrated, Alligator jaws, with or without a spike. The Standard Oval and Serrated offer larger capacity. Biopsy forceps are offered in 160 cm, 180 cm, and 230 cm ...
Manufactured by:Cellmyx, Inc. based inCarlsbad, CALIFORNIA (USA)
e SuperG® Micro Cannula is optimized for harvesting 500µm clusters that are perfect for fat transfer to the whole face, without the need for using harmful mechanical processes. The patented Super® Micro Cannula is designed with a fitted array of 300 holes that are 500µm in size, arranged evenly and concentrically around the shaft of the cannula and comes with a special Luer ...
Manufactured by:Micro-Tech Latam based inPanama, PENNSYLVANIA (USA)
Micro-Tech's Wire-Guided Multi-Stage Dilation Balloons are designed for precise stricture dilation in endoscopic gastrointestinal procedures. These balloons are crafted from high-quality Pebax with distinct features such as rounded shoulders and clear visibility, optimizing procedural efficiency. Capable of inflating to three distinct sizes within one device, they reduce the need for multiple ...
by:Zansors, LLC based inArlington, VIRGINIA (USA)
Micro-Shield is a face covering that is high-quality, reusable, breathable and comfortable to wear. Micro-Shield mask uses an ergonomic earloop design for maximum comfort, copper thread technology for extra protection and silk-like fabric to be light and soft. ...
Manufactured by:Magnolia Medical Technologies based inSeattle, WASHINGTON (USA)
With Steripath Micro, you can consistently divert and sequester the skin contaminants known to cause false-positive blood culture results. The latest, low-volume Initial Specimen Diversion Device provides you with a reliable contamination-reducing technology for better patient outcomes and decreased cost burdens from a sepsis ...
Manufactured by:Credence MedSystems, Inc. based inMenlo Park, CALIFORNIA (USA)
The Credence Micro-Dose™ Syringe System was designed for ocular injections. Micro-Dose allows controlled purging of the air bubble to avoid patient pain, followed by precise delivery of extremely low dose ...
Manufactured by:Applied Medical Technology, Inc. (AMT) based inBrecksville, OHIO (USA)
A gastric-jejunal feeding device is inserted through the abdominal wall and into the stomach. Unlike a g-tube which ends in the stomach, a gastric-jejunal feeding device travels into the stomach, through the pylorus, and ends in the small intestine. A gastric-jejunal feeding device is typically positioned such that nutrients are delivered into the jejunal segment of the small intestines. ...
Manufactured by:Oasis Diagnostics based inVancouver, WASHINGTON (USA)
The Micro•SAL™ Small Animal Saliva Collection Device is intended for the controlled, standardized collection and transportation of oral fluid (saliva) specimens from small animals for subsequent testing, analysis, or research applications. The devices do not provide any diagnosis of disease. Despite the availability of a number of available oral fluid collection devices, there are few ...
Manufactured by:Oasis Diagnostics based inVancouver, WASHINGTON (USA)
The Micro•SAL™ for Children Saliva Collection Kit is an excellent kit for the collection of saliva samples from younger children who may be too old to use the Pedia•SAL™ Infant Salivary Collection Kit. A reduced size collector has a small soft pad which wicks up saliva from the mouth, collecting up to a maximum of 500 µl of saliva. The sample delivered by the ...
Manufactured by:Micro-Tech Endoscopy USA based inAnn Arbor, MICHIGAN (USA)
Micro-Tech Endoscopy has over two decades of experience making high quality, affordable esophageal stent options. Our segmented esophageal stent conforms to bypass esophageal stenoses and allows greater flexibility which may be more comfortable for patients. The deployment system has a pliable and tapered tip to facilitate placement through tight strictures while the pre-loaded delivery catheter ...
Manufactured by:Micro-Tech Endoscopy USA based inAnn Arbor, MICHIGAN (USA)
The Micro-Tech Inflation Device Was Designed To Accommodate Smaller Hands, Featuring A Lever-Lock. Lever-lock controlled with the holding hand. Plunger moved to prime, inflate, or create a vacuum. Luminous dial includes atmosphere on the outer scale for clear visualization. Priced competitively. 60mL single-use syringe includes a fill mark for Micro-Tech Balloons, in combination delivers ...
Manufactured by:Micro-Tech Endoscopy USA based inAnn Arbor, MICHIGAN (USA)
Distributed exclusively by Micro-Tech Endoscopy, the Fidmi system is a new initial-placement low-profile PEG device that can help to minimize frequent replacements, reduce clogging and improve patient quality of ...
Manufactured by:LSI Solutions, Inc. based inVictor, NEW YORK (USA)
COR-KNOT MICRO features a pre-loaded titanium fastener for use with USP sized 6-0, 7-0, or 8-0 polypropylene ...
Manufactured by:MGC Diagnostics Corporation based inSaint Paul, MINNESOTA (USA)
The MICRO 5000 spirometer is the building block of your pulmonary function lab. A modular desktop spirometry system with reliable and accurate testing in a single, compact device. COMPLETE BASIC SPIROMETRY: Including Forced Vital Capacity, Slow Vital Capacity, Maximum Voluntary Ventilation and Minute Tidal Ventilation including bronchochallenge testing ...