Refine by
Cannulated Screw Equipment & Supplies
55 equipment items found
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
Re-introducing the proven Mecron® Cannulated Screw, re-designed for today’s foot and ankle surgeons…Merete® founder Emmanuel Anapliotis developed and launched the proven cannulated orthopedic screw in the early 1970s. CEO Alexia Anapliotis has updated her father’s historic Mecron® headed and ...
Manufactured by:OrthoPediatrics Corp. based inWarsaw, INDIANA (USA)
OrthoPediatrics is pleased to launch the next generation Cannulated Screw System! The new system is available in multiple screw diameters including: 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm and 5.5mm. For each configuration, all screws and instruments are housed in one case/tray – giving the added convenience of an ...
Manufactured by:Paragon 28, Inc. based inEnglewood, COLORADO (USA)
The Mini-Monster® Screw System is a cannulated screw system containing headed and headless 2.0 mm, 2.5 mm, 3.0 mm, 3.5 mm and 4.0 mm screws. Every detail was scrutinized that went into the design of these screws–emerging with a screw that comes with a “Monster” bite and a ...
Manufactured by:Enovis based inLewisville, TEXAS (USA)
The Tiger Cannulated Screw is a self-drilling, self-tapping, titanium alloy lag screw with the look, strength, and bite of a “Tiger”. ...
Manufactured by:Advanced Orthopaedic Solutions based inTorrance, CALIFORNIA (USA)
The AOS 7.0mm Cannulated Screw System is designed to optimize surgical outcomes while simplifying procedures. This system presents to the surgeon the optimal choice of implants, instruments, and disposables for all indicated hip, pelvis, and extremity fracture treatments. The 7.0mm Cannulated Screws offer stable fracture fixation ...
Manufactured by:Enovis based inLewisville, TEXAS (USA)
The Tiger Headless Cannulated Screw is a self-drilling, self-tapping, titanium alloy lag screw with the look, strength, and bite of a “Tiger”. ...
Manufactured by:The Orthopaedic Implant Company (OIC) based inReno, NEVADA (USA)
OIC’s Cannulated Screw System is designed to provide hospitals and surgery centers a versatile, high quality and cost effective solution for cannulated screw implants and instruments. Manufactured at the same facilities and from the same raw materials as the leading brands, OIC’s Cannulated ...
Manufactured by:Boneunion Medical based inXiamen City, CHINA
The Standard Washer for Cannulated Screws is an integral component of Boneunion Medical's Cannulated Screw System, designed specifically for use with 4.0mm and 6.5/7.3mm cannulated screws. This washer, constructed from high-performance Ti-6Al-4V titanium alloy, ensures durability and reliability ...
Manufactured by:Narang Medical USA Corporation based inMiami, FLORIDA (USA)
The Cortex Cannulated Screw Ø 2.7mm is designed for specialized orthopedic procedures, providing enhanced applications in surgical contexts that require precision and reliability. These screws are available in both short and full thread variants, and are constructed using materials such as stainless steel and titanium to ensure durability ...
Manufactured by:Enovis based inLewisville, TEXAS (USA)
The 4.5mm Tiger Cannulated Screws are dual lead, self-drilling, self-tapping, titanium alloy lag screws with the look, strength, and bite of a “Tiger”. ...
Manufactured by:Medartis AG based inBasel, SWITZERLAND
Sharp screws to cover numerous areas of use across upper and lower limb due to patented SpeedTip polygonal geometry, precise and sharp thread, optimized cutting geometry. Self-holding porperties beween screw and screwdriver due to patented ...
Manufactured by:Gramercy Extremity Orthopedics, LLC based inRichardson, TEXAS (USA)
Cannulated bone screws for reconstruction and fracture ...
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
The self-drilling and self-tapping Merete® Cannulated PCS Screws are made of titanium alloy (Ti6AI4V, DIN EN ISO ...
Manufactured by:Alliance Spine based inSan Antonio, TEXAS (USA)
The Cannulated Aspiration Screw consists of a Cannulated Aspiration Screw, Stylet and Luer Lock. The luer lock is intended to allow bone marrow biopsy/aspiration. The components of this device are composed of surgical grade stainless steel per ASTM ...
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
The Merete® Cannulated HCS (Headless Compression Screws) are self-drilling/self-tapping, dual pitched screws with a threaded head which can be countersunk into the bone. The screws are available in diameters of 3.0 mm, 4.3 mm and 6.5 mm in various ...
Manufactured by:BioPro, Inc based inPort Huron, MICHIGAN (USA)
The HBS Headless Cannulated Compression Screw System features screws 2.5mm and 3.0mm screws with various cutting tip styles available. The 2.5/3.5 and 3.0/3.9mm self-tapping (ST) only screws feature self-tapping tips that maximize thread length for use in small bones. The 2.5/3.5mm and 3.0/3.5mm self-drilling and ...
Manufactured by:Inion Oy based inTampere, FINLAND
We’re excited to introduce our NEW bioabsorbable headless compression screw Inion CompressOn™ ! The Inion CompressOn™ screw family contains a wide range of sizes (Ø 2.7 mm-Ø 6.0 mm, lengths 12 mm-90 mm). And all the screws are cannulated. These are a few reasons why the Inion CompressOn™ ...
Manufactured by:BioPro, Inc based inPort Huron, MICHIGAN (USA)
Manufactured by:Medartis AG based inBasel, SWITZERLAND
Plate has a combination of 2.8 and 3.5 mm screws. 20° posterior-anterior oblong hole and round hole with recess for syndesmotic screw fixation. Eight 2.8 Trilock screws in the thinner distal section. 2.8 mm flap for fixation of Wagstaffe fragment. ...
Manufactured by:Ulrich GmbH & Co. KG based inUlm, GERMANY
System: Universal system for dorsal stabilization. From the occiput to the upper thoracic spine. Polyaxial and cannulated screws. Prepared for ...