Refine by
Hip Arthroplasty Equipment & Supplies
46 equipment items found
Manufactured by:Innomed, Inc. based inSavannah, GEORGIA (US) (USA)
Instrument system specifically designed for Direct Anterior approach Total Hip Arthroplasty. Lighted retractors can be attached to a fiber optic light cable with ACMI (female) ...
Manufactured by:Biotechni based inLa Ciotat, FRANCE
Femoral stem for Total hip arthroplasty and hemiarthroplasty. Version Titanium Press-fit stem with Porous Ti+HA coating in metaphysis and HA only in diaphysis, Version Stainless Steel to be Cemented, mirror-polished finish. 10 sizes (from 130 to 190mm lengths). 135° CCD angle for coated stems with or without collar, and cemented. 130° CCD angle Varised ...
Manufactured by:Intellijoint Surgical Inc. based inKitchener, ONTARIO (CANADA)
Intellijoint HIP is a surgeon-controlled, navigation tool for total hip arthroplasty (THA). It provides real-time, intraoperative measurements for fast, easy and accurate implant alignment for cup position, leg length and offset. ...
Manufactured by:Zimmer Biomet based inWarsaw, INDIANA (USA)
The collarless, polished, double-taper design concept used in the CPT Hip System has proven itself clinically in more than 25 years of use.¹ This distinctive design philosophy is based on the use of natural compressive forces to help ensure that the implant is firmly seated and wedged within the cement mantle. The CPT System, in cobalt-chromium² and stainless steel,3,4 has achieved ...
Manufactured by:Zimmer Biomet based inWarsaw, INDIANA (USA)
The fully porous, distal fixation philosophy of the Arcos One-piece Femoral Revision System offers three cylindrical, forged titanium stem options with a unique size range to address a wide range of femora, including patients of small ...
Manufactured by:Zimmer Biomet based inWarsaw, INDIANA (USA)
Zimmer Biomet’s Arcos Modular Femoral Revision System meets the demands of complex hip revision surgery by offering surgeons and OR staff the ability to customize both the hip implant and its corresponding instruments. Three proximal and five distal geometry options provide surgeons 117 proximal/distal combinations and multiple auxiliary fixation options for various femoral defects. This ...
Manufactured by:Maxx Orthopedics, Inc. based inNorristown, PENNSYLVANIA (USA)
TheQRS Process is designed for outpatient knee and hip ...
Manufactured by:Femcare Limited based inRomsey, UNITED KINGDOM
A PVA fibre and latex free sponge. The Femcare® Fempac is a femoral canal sponge used to clean the femoral canal during hip ...
Manufactured by:Innomed, Inc. based inSavannah, GEORGIA (US) (USA)
A self-retaining frame and retractor system designed for use during anterior total hip arthroplasty, the blades help retract the hip capsule and musculature, permitting an unobstructed view of the acetabulum while freeing an ...
Manufactured by:United Orthopedic Corporation (UOC) USA Inc. based inIrvine, CALIFORNIA (USA)
U-Motion II is a comprehensive acetabular hip system offers a wide range of acetabular cup, liner, and femoral head prostheses options for primary and revision hip ...
Manufactured by:3D Medical based inMarolles-en-Brie, FRANCE
Acetabular bone loss is a challenging problem in revision total hip arthroplasty. Customs strategy allows to fit the implant to the residual host bone, bypassing the bony deficiency and restoring hip ...
Manufactured by:United Orthopedic Corporation (UOC) USA Inc. based inIrvine, CALIFORNIA (USA)
The Full XPE Cup is designed for cemented fixation in primary or revision hip arthroplasty. Made from XPE (Highly Crosslinked Polyethylene), the cemented cup is designed to provide optimal stability and improved longevity. The Full XPE Cup can be combined with a larger size femoral head to improve range of motion and reduce the potential ...
Manufactured by:GO German Orthopedic Implants GmbH based inHamburg, GERMANY
All the cemented Acetabular Cups can be implanted via any standard approach for total hip arthroplasty, depending on the surgeon's level of ...
Manufactured by:Euromed Implants GmbH based inStade, GERMANY
The Zweymüller stem is the original tapered stem with a rectangular cross section and has been implanted since 1979. Since its introduction, the Zweymüller has established high standards for total hip arthroplasty with his design features, the excellent clinical results, and a technically simple surgical ...
Manufactured by:Nafx Medical based inCankaya, TURKEY
This cool implant is for cerclage procedures of femur, tibia and humeus shaft fractures and primary or revision surgery of hip arthroplasty. This polymer cable has superior properties to metal cables. It preserves bone periost and avoids metal debris. It locks the cable with Titanium Clips as ...
Manufactured by:GO German Orthopedic Implants GmbH based inHamburg, GERMANY
for total hip arthroplasty are small ceramic balls that are placed onto the hip stem. Due to the conical design of the 12/14 taper, the heads sit firmly on the stem and require no additional fixation. EasyHip Ceramic Heads come in three diameters (28 mm, 32 mm and 36 mm) and four head neck lengths, ranging from -4 mm to +8 mm. ...
Manufactured by:Bone Foam, Inc. based inCorcoran, CALIFORNIA (USA)
The Hippy is an innovative tabletop system that consistently and accurately positions patients for anterior hip arthroplasty. The postless design reduces injury risk to the perineum while stabilizing the pelvis and torso. The Hippy has bilateral removable hip bolsters which improves surgical access to the acetabulum and creates a stable pelvis ...
Manufactured by:Smith & Nephew plc based in, UNITED KINGDOM
The BIRMINGHAM HIP◊ Resurfacing (BHR◊) System is a conservative approach to hip arthroplasty in which an all-metal bearing couple is used to preserve, rather than replace, a patient’s femoral head and neck. It was first implanted in July 1997, and was approved for use in the United States by the Food and Drug Administration in 2006. ...
Manufactured by:United Orthopedic Corporation (UOC) USA Inc. based inIrvine, CALIFORNIA (USA)
The U2 Revision Stem is a fully coated Titanium Plasma Spray cylindrical stem optimized for revision hip arthroplasty. The U2 Revision Stem is designed with a shorter neck offset compared to primary implant designs in order to facilitate joint reduction for patients with soft tissue scarring or contracture from previous surgeries. 180 mm and 230 mm stem length ...
Manufactured by:MedSpark, LLC based inSan Luis Obispo, CALIFORNIA (USA)
Total Hip Arthroplasty (replacement) or THA surgery requires a wide range of specialized instruments for surgeons to successfully complete the surgical procedure. During a typical THA procedure, the acetabulum (hip socket) is resurfaced in preparation to receive the outer shell (typically titanium) of the acetabular component of the implant ...