Refine by
Medical Practices And Laboratories Equipment & Supplies
104 equipment items found
Manufactured by:Stakpure GmbH based inNiederahr, GERMANY
Ion exchangers from Stakpure are designed for medical practices and small laboratories with a daily requirement of up to 10 liters of purified water. The system includes non-pressurized cartridges that are replaceable after extended use. The cartridges come with a conductivity meter, wall mount, and a set of hoses, making them easy to install and ...
Manufactured by:Techcon based inCypress, CALIFORNIA (USA)
This product consists of a 400 barrel, 1cc Luer slip which comes in a quantity of 1000 units. The Luer slip design facilitates quick and easy connections between the syringe and other components, ensuring a reliable and efficient transfer of fluids. This is especially beneficial in laboratory and medical settings where quick and reliable operations are critical. The Luer slip's standardization is ...
Manufactured by:Sonoco ThermoSafe based inArlington Heights, ILLINOIS (USA)
ThermoSafe® Diagnostic Shippers are ready-to-use combination/triple packaging kits that have been tested and certified to meet the material and performance requirements for the transport of diagnostic specimens in conformance with U.S. Department of Transportation (DOT), U.S. Postal Service and International Air Transport Association (IATA) Packing Instruction ...
Manufactured by:OPTUBUS GmbH based inSalem, GERMANY
The straight male Luer to barbed adapter serves as a versatile component in fluid management systems, particularly within the medical and laboratory sectors. It bridges connections between a Luer fitting and a barbed fitting, facilitating the seamless transfer of fluids or gases between devices equipped with disparate connection types. This adapter is instrumental when integrating flexible tubing ...
Manufactured by:Tobra Medical Inc. based inWake Forest, NORTH CAROLINA (USA)
Maximum protection (PP/PE), Hooded coverall, Elastic wrists, waists, and ankles for better fit and freedom of movement, Self-adhesive zipper and chin flap for optimal protection, Serged seams fully over taped for increased protection, Disposable and non-sterile, Latex-free, Regular and Large sizes ...
Manufactured by:MVE Biological Solutions based inBall Ground, GEORGIA (US) (USA)
Lab Series Cryogenic Liquid Dewars Used in Laboratories and Medical Facilities Worldwide to Store Liquid Nitrogen. These high efficiency, super insulated dewars are the most convenient, economical way to store and dispense liquid nitrogen. Many lab units can be fitted with pouring spouts, pressurized dispensing devices or dippers to aid in the transfer of liquid ...
Manufactured by:Pharmapex Group based inSan Diego, CALIFORNIA (USA)
Our range of analyzers and reagents can serve the needs of laboratories of any size – today and ...
Manufactured by:Ohio Medical Corporation based inGurnee, ILLINOIS (USA)
Ohio Medical oil-less scrolls are well proven compressors for medical, lab, and industrial applications. Both low pressure and high pressure models are available; they can be powered by either 3 or 5 HP motors, depending on operating speed. If your system is equipped with Powerex or Atlas Copco scroll compressors call on Ohio Medical for comparable replacements. Also, ask about our swap out ...
Manufactured by:NEX MEDICAL a brand of PDI International based inCasorezzo (MI), ITALY
From the latest development activities at Nex Medical Laboratory, a new & innovative range of sponges for pre-operative skin preparation & skin ...
Manufactured by:Intco Medical Technology Co., Ltd based inZibo, CHINA
Being widely used in medical purpose, industrial purpose, laboratory, healthcare and nursing, general housekeeping, and IT ...
Manufactured by:Biozek Medical based inApeldoorn, NETHERLANDS
Biozek Medical & Laboratory Disposable line, more than 10 years of experience in the high production of disposable Laboratory ware. Think about special Blood collection tubes series glass – plastic, sterile and non-sterile with special Biozek brand design. ...
Manufactured by:Power Control & Management ltd based inMirpur, BANGLADESH
PowerCom IPS is the ideal solution for continuous power supply facilities during mains failure. The system has many distinct features over the conventional generators. It is the precession IPS designed according to our power line Condition. It has the ability to charge the battery in low voltage so you will get sufficient backup in Failure of ...
Manufactured by:Ohio Medical Corporation based inGurnee, ILLINOIS (USA)
Motor mounted SM pumps are compact, which make them ideal for extrusion, laboratory, and medical applications. Standard motors are 230/460 volt, 3 ph. All models feature stainless steel impellers and mechanical seals. They are also available in all stainless steel ...
Manufactured by:Biolab Scientific Limited based inToronto, ONTARIO (CANADA)
Biolab Bullet Ice Maker Series 100 is compact in size, made of highly durable material with energy efficient features. Increased efficiency gives quick production of bullet shaped ice cubes with ice making capacity from 20 kg/24h up to 120 kg/24h. Self contained storage bin eliminates the need of a separate storage ...
Manufactured by:NEX MEDICAL a brand of PDI International based inCasorezzo (MI), ITALY
From the latest development activities at Nex Medical Laboratory, a new & innovative range of antiseptic solutions for pre-operative skin preparation & skin ...
Manufactured by:PDC based inValencia, CALIFORNIA (USA)
Direct Thermal 2'x1-1/4" Label, 3/4" Core Size, Green Border, 250 Labels per Roll, 8 Rolls per Case is available to buy in increments of ...
Manufactured by:AccuTec, Inc. based inVerona, VIRGINIA (USA)
Personna D/E .015 Blade Pathology 10/100/1. Edge Type: 3 Facet. Blade Material: High Carbon. Blade Thickness: 0.015. Blade Color: Silver. Pack Type: ...
Manufactured by:Mortech Manufacturing based inAzusa, CALIFORNIA (USA)
Designed as an economical dissection platform for use in research laboratories and medical schools. Fabricated from heavy gauge 304 stainless steel with a No.4 ...
Manufactured by:EKU Elektronik GmbH
based inLeiningen, GERMANY
The ViP Ventilatortester is a mobile microprocessor controlled measurement meter for flow, volume, pressure and oxygen. Developed for medical and laboratory applications and especially used to test ventilators its main advantages are its high measuring precision and simplicity of use. Its wide spectrum of use lets this meter stand as an ideal unit for surveying and testing tasks. ...
Manufactured by:Suzhou Rapid Precision Mould Co., Ltd. based inSuzhou, CHINA
Our medical parts moulds are mainly used in syringes, medical consumables (three-way stopcock, Luer connectors, Y housing joints, Tee joints, wring plugs, etc.), laboratory consumables, medical devices & filters etc. Our Mould has high cavitation, fast cycle and long life. The steel is from ASSAB, BÖHLER and Gröditz. The hot runner brands we cooperate with are Husky and ...