Show results for
Refine by
Testing Medical Equipment Supplied In China
14 equipment items found
Manufactured by:Infitek Co., Ltd. based inJinan, CHINA
Coagulation analyzer is a routine testing medical device that measures the content of various components in human blood, quantifies the results of biochemical analysis, and provides reliable digital basis for clinical diagnosis of various diseases of ...
Manufactured by:Qinsun Instruments Co., LTD based inShanghai, CHINA
Face Masks bacterial filtration efficiency BFE tester is to determine the bacterial filtration efficiency (BFE) of medical face mask materials by employing a ratio of the upstream bacterial challenge to downstream residual concentration of the tested medical face mask materials. The tester provides certain flow rate of bacterial aerosol. The ...
Manufactured by:Cell Instruments Co., Ltd. based inJinan, CHINA
Ampoule break force tester measures the hardness of ampoule bottle under a certain force. The force measured can be taken as a guide in production. An ampoule sample is place on fixtures and the pressing head is driven down at the speed of 10 mm/m. The breaking strength is detected by the high precision load cell when the pressing head touches the ampoule neck and breaks ...
Manufactured by:Gester International Co., Ltd. based inQuanzhou City of Fujian, CHINA
Medical Face Mask Synthetic Blood Penetration Resistance Tester In stock, fast ...
Manufactured by:InterTech Development Company based inSkokie, ILLINOIS (USA)
Proven InterTech Microscale Technology measures leaks down to the equivalent of a 0.5 micron defect diameter. A careful review of application requirements including the Maximum Allowable Leakage Limit (MALL) will dictate the test method used. Testing is consistent with ASTM requirements (F-3287-17, F-2338-09). Proprietary technology is available for testing with minimal headspace volumes. ...
Manufactured by:Chengyi Electronics (Jiaxing) Co., Ltd based inJiaxing City, CHINA
HDI Board, 0.18mm BGA, POFV 4L ENIG. HDI Board – High Density Interconnect. HDI boards are one of the fastest growing technologies in PCBs and are now available at Epec. HDI boards contain blind and/or buried vias, and typically contain. 006 diameter or smaller. They have higher circuit density than traditional circuit boards. Circuit boards with higher wiring density per unit area compared ...
Manufactured by:Beijing United Test Co., Ltd based inBeijing, CHINA
Bone screws are the most common internal fixation device and used more then any other type of implant. Bone screws have various applications including driving various designs and sizes of screws. Manufacturers are required to perform device testing in accordance with ASTM F543 and ISO 6475 to determine the mechanical properties of the screw. The ASTM F543 test procedure outlines 4 tests that ...
Manufactured by:Qinsun Instruments Co., LTD based inShanghai, CHINA
Disposable medical mask tester SYY-01 is used to test the visual field effect of daily protective masks, face masks, gas masks, etc. Tester etc. This testing machine is suitable for labor safety and protection inspection centers, medical device and drug inspection centers, disease prevention and control centers, textile ...
Manufactured by:Infitek Co., Ltd. based inJinan, CHINA
The Cholera Ag O1 Rapid Test is a rapid chromatographic immunoassay for the qualitative detection of Cholera Ag O1 antigen from fecal samples to aid in the diagnosis of O1 group Cholera ...
Manufactured by:Satcon Medical based inBeijing, CHINA
A height-adjustable medical hospital bed that is widely used in intensive care units. The biggest advantage of this bed is that the height of the bed can be adjusted. When the patient gets out of bed, it becomes easier by adjusting the height. When the patient needs to dock the inspection instruments of different heights, it can also be adjusted by adjusting the height. ...
Manufactured by:Chengdu Seamaty Technology Co., Ltd. based inChengdu, CHINA
Seamaty SD1 is a fully automated chemistry analyzer designed for the on-site testing. It can provide faster, easier, more accurate medical diagnosis using 0.1cc of whole blood, serum or plasma. With built-in centrifuge, QR code , real-time quality control, SD1 can provide faster, easier, more accurate medical diagnosis. The test ...
Manufactured by:Infitek Co., Ltd. based inJinan, CHINA
Dry Immunofluorescence Analyzer is used for in vitro quantitative detection of various indicators in human serum, plasma, whole blood, and urine.It is mainly used to detect the contents of PCT, hs-cTnI, NT-proBNP, H-FABP, CK-MB, MYO, D-Dimer, NGAL, etc., and the results are used for clinical auxiliary diagnosis. ...
Manufactured by:Lepu Medical Technology (Beijing) Co.,Ltd. based inChangping District, CHINA
SARS-COV2 Antigen Rapid Test Card contains a gold-labeled novel coronavirus N protein monoclonal antibody pre-coated on the bonding pad and a paired novel coronavirus N protein monoclonal antibodies ?xed in the test line (T) and corresponding antibodies in the quality control line (C). SARS-COV2 Antigen Rapid Test Kit can detect the virus from the ?rst phase of infection (2-3 days before ...
Manufactured by:Infitek Co., Ltd. based inJinan, CHINA
The POCT Immunofluorescence Quantitative Analyzer is used cooperatively with special fluoroimmunoassay reagent strips and applicable to fluoroimmunoassay of human body samples. The product can be used for semiquantitative and quantitative immunoassay of medical, antiepidemic and scientific research ...