- Home
- Equipment
- asia middle east
- biomedical
Refine by
Locations
- Asia & Middle East
- Afghanistan
- Armenia
- Azerbaijan
- Bahrain
- Bangladesh
- Bhutan
- Brunei Darussalam
- Cambodia
- China
- East Timor
- Georgia
- Guam
- India
- Indonesia
- Iran
- Iraq
- Israel
- Japan
- Jordan
- Kazakhstan
- Kuwait
- Kyrgyzstan
- Laos
- Lebanon
- Malaysia
- Maldives
- Mongolia
- Myanmar
- Nepal
- North Korea
- Oman
- Pakistan
- Palestinian Territories
- Philippines
- Qatar
- Russia
- Saudi Arabia
- Singapore
- South Korea
- Sri Lanka
- Syria
- Taiwan
- Tajikistan
- Thailand
- Turkmenistan
- United Arab Emirates
- Uzbekistan
- Vietnam
- Yemen
Biomedical Equipment Supplied In Asia Middle East
10,482 equipment items found
Manufactured by:Coligh Optics Technology Co., Ltd based inJiulongpo District, CHINA
Biomedical filters are used in microplate readers to selectively filter light based on its wavelength, allowing for specific detection and quantification of biomolecules such as proteins, DNA, and RNA. Microplate readers typically use a variety of filters to detect and quantify the absorbance or fluorescence of different biomolecules. ...
Manufactured by:Haier Biomedical based inQingdao, CHINA
A versatile low-temperature freezer installed in hospitals, blood stations, diseases control & prevention centers, research institutions, bioscience laboratories and medical laboratories. It is suitable for storing a wide variety of biological products including viruses, bacteria, red blood cells, white blood cells, skin, bone and semen as well as ocean-going supplies and electronic devices. ...
Manufactured by:B Medical Systems based inHosingen, LUXEMBOURG
Ultra-Low Freezer with 900 L | 31.78 cu ft storage ...
Manufactured by:Mirae ST Co., Ltd. based inAnyang-si, SOUTH KOREA
Built-in EDI Module. Produces Type II water on demand with a wide range of flow rates up to 150L/hr. MDS(Medical Delivery system). Easy installation and ...
Manufactured by:Longenesis based inRiga, LATVIA
Enable biomedical data identification with Curator; Biomedical research acceleration platform that provides an opportunity for clinical investigators, patient organisations, registries, biobanks etc. to showcase the scope of data for research without compromising the privacy of the patients and data protection regulations and allowing sponsors real-time patient ...
Manufactured by:Sychem Limited based inEastleigh, UNITED KINGDOM
Steelco's AC 1400 cabinet style washer is an efficient system which is able to clean and disinfect all types of animal cages and bottles within a small/medium sized biomedical facility. It assures excellent results by rinsing at 85°C/185°F through an independent circuit, providing fast & effective cleaning and rinsing to caging and ...
Manufactured by:Sychem Limited based inEastleigh, UNITED KINGDOM
The AC7000 Cage & Rack Washer is specifically designed to support the throughput of a large biomedical facility, providing fast cycle times, uncompremising wash coverage and gauranteeing thermal disinfection. An energy saving system grants a reduction in energy, water and chemical detergent consumption as well as optimising heat ...
Manufactured by:ECOKlien - RT Solutions Pte Ltd based in, SINGAPORE
Biomedical liquid waste may drastically endanger humanity and the environment. ECOKlien furnishes an eco–original biomedical liquid fritter away treatment system to treat body fluids, blood, urine, and sputum as per Medical Waste management ...
Manufactured by:Rockwell Industrial Plants Limited based inMohali, INDIA
Fully automated machine with PLC control panel and online printer. Operating temperature up to 1100C+. Automatic door operating mechanism. Provided with State of Art waste shredding mechanism. High temperature resistant silicon gasket. Silent vacuum pump. Multiple pre programmed cycle option. Leakage test. Low start up time. With audio & visual alarm. Steam Generator – Optional Item. ...
Manufactured by:TRATO TLV based inRoubaix, FRANCE
SECURIDYS 816 (8 analog inputs and 16 logic inputs) units have been awarded the CE Marking. They can be configured according to your needs, to monitor medical compressed gas distribution and vacuum systems in accordance with the standards and regulations in force. The analog and logic channels on eight different networks (sources, tanks, compressors…) can all be monitored by the same unit. ...
Manufactured by:InterTech Development Company based inSkokie, ILLINOIS (USA)
InterTech provides total test solutions for testing various types of catheters. For instance, multi-lumen catheters are sequentially leak and flow tested at a fast speed using InterTech MED75y two independent channel test instrument. Each lumen of the catheter is either leak or flow tested under 2.0 seconds. ...
Manufactured by:InterTech Development Company based inSkokie, ILLINOIS (USA)
Proven InterTech Microscale Technology measures leaks down to the equivalent of a 0.5 micron defect diameter. A careful review of application requirements including the Maximum Allowable Leakage Limit (MALL) will dictate the test method used. Testing is consistent with ASTM requirements (F-3287-17, F-2338-09). Proprietary technology is available for testing with minimal headspace volumes. ...
Manufactured by:APS Lab Instruments Pvt. Ltd. based inDelhi, INDIA
"APS" Mortuary Storage Cabinets are designed for storing of cadaverous under cool temperature conditions in order to prevent decomposition. These cabinets are provide an ideal cold storage environment for the preservation of vaccines, medicines, reagents, specimens and are most essential for Hospital, Airports, Railway Stations, research institutes, disaster management and Medical Colleges etc. ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
SI021 - FEP Membranes, 15 in the ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
SI020 1302 Service Kit (with PP Jackets). These kits are used to service our Strathtox Instrument and our Biomed ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
The oxygen content of blood can be measured accurately and quickly by the method of Tucker (1967). A small sample of blood is introduced into the chamber containing a solution of ferricyanide. The resulting release of bound oxygen produces an increase in PO2 which is detected by the oxygen electrode. The oxygen content can be calculated from the PO2 change. The base section of the TC 500 is ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
For continuous in-line oxygen monitoring or for connection to a flow-through respirometer chamber. The acrylic chamber of the flowcell forms a threaded connection to the integral electrode holder. Only the tip of the electrode projects into the water flow. The inlet and outlet tubes are made from stainless steel. To enable the flowcell to be immersed below the surface of the constant temperature ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
This is a Clark-type polarographic electrode, with a 22 micron diameter platinum cathode and silver/silver chloride anode, connected by a buffered potassium chloride electrolyte solution. In the normal configuration the cathode is covered with a relatively low permeability polypropylene membrane, in order for the electrode to be used in unstirred solutions or where minimal stirring is required. ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
For use with custom designed respiration chambers. The electrode holder is a black acetal cylinder in which the electrode is located so that its tip projects from the end. The holder is used for the insertion of the electrode into the customers’ own respiration chamber. An acrylic collar containing an “O” ring on its inside surface is also provided. This can be cemented over a ...
Manufactured by:Beijing United Test Co., Ltd based inBeijing, CHINA
Bone screws are the most common internal fixation device and used more then any other type of implant. Bone screws have various applications including driving various designs and sizes of screws. Manufacturers are required to perform device testing in accordance with ASTM F543 and ISO 6475 to determine the mechanical properties of the screw. The ASTM F543 test procedure outlines 4 tests that ...