- Home
- Equipment
- canada ontario
- medical tools products
Refine by
Medical Tools Products Equipment Supplied In Canada Ontario
19 equipment items found
Manufactured by:Genecis based inToronto, ONTARIO (CANADA)
PHA plastic can be used in the production of medical implants, sutures, cardiac valves, vascular grafts, and other medical equipment and packaging. Because Genecis PHA plastic is produced from natural materials, it can be utilized safely in medical ...
Manufactured by:Southmedic Inc. based inBarrie, ONTARIO (CANADA)
The Southmedic Clear Choice™ Eye Shields provide a cost-effective, comfortable, distortion-free solution with a reusable ...
Manufactured by:Southmedic Inc. based inBarrie, ONTARIO (CANADA)
The Southmedic Clear Choice Face Shields provide a cost-effective, comfortable, distortion-free solution with a reusable ...
Manufactured by:Southmedic Inc. based inBarrie, ONTARIO (CANADA)
The Southmedic Clear Choice Foam Face Shields provide light-weight, comfortable, distortion-free splash ...
Manufactured by:Southmedic Inc. based inBarrie, ONTARIO (CANADA)
The Southmedic MDI Adaptor is an Adult Metered Dose Inhaler (MDI) Adaptor for use with the new MDI with dose counters as well as traditional MDI canisters. The SMDIA-1000 can remain in line with the breathing circuit as directed by physician and/or hospital protocol. It is compatible with both plastic and metal canister stems. Arrows clearly mark the direction of flow. It is equipped with a ...
Manufactured by:SMP Canada Corporation. based inRichmond Hill, ONTARIO (CANADA)
The SMP 3-Mode Intermittent/Continuous Vacuum Regulator allows for both Intermittent and Continuous modes of surgical suction. With its durable design and construction, this vacuum regulator offers maximum performance and minimum maintenance allowing it to be the ideal choice of medical practitioners ...
Manufactured by:Southmedic Inc. based inBarrie, ONTARIO (CANADA)
The Southmedic Endotracheal Tube Protector, or Bite Block, is designed to fit multiple sizes of endotracheal tubes (ET Tubes). An ET Tube is a catheter inserted into the trachea through the mouth or nose used to maintain an open air passage to deliver oxygen or permit suctioning of mucus or to prevent aspiration of the stomach contents. Southmedic Bite Block is made from a non PVC environmentally ...
Manufactured by:Southmedic Inc. based inBarrie, ONTARIO (CANADA)
Endotracheal Tube Protector, Adult, Triple Security Ring, 6.5mm-9.5mm. Unit of Measure; ...
Manufactured by:Southmedic Inc. based inBarrie, ONTARIO (CANADA)
Side Stream CO2 Sampling with simultaneous oxygen delivery. Soft nasal prongs designed to efficiently and comfortably deliver O2. Anatomically designed block provides a stable fit without twisting. CO2 is collected at the nares with a supplemental port to collect orally, while supplemental O2 is delivered upwards to the ...
Manufactured by:Southmedic Inc. based inBarrie, ONTARIO (CANADA)
During exhalation, although exhaled carbon dioxide escapes through the mask openings, it is also sampled through the diffuser cup. The cup is attached to a sampling line that can be connected to a side stream monitor to obtain EtCO2 readings. It is available in three sizes; standard adult, plus and ...
Manufactured by:Southmedic Inc. based inBarrie, ONTARIO (CANADA)
The Capnoxygen® mask is an oxygen mask with breath to breath monitoring for non-intubated patients. It allows sampling of exhaled carbon dioxide from both the mouth and nose while at the same time administering oxygen. Not made with natural rubber latex, the mask is soft and allows form-fitting comfort for the face. It is available in three sizes; standard adult, adult ophthalmic with a lower ...
Manufactured by:InterTech Development Company based inSkokie, ILLINOIS (USA)
InterTech provides total test solutions for testing various types of catheters. For instance, multi-lumen catheters are sequentially leak and flow tested at a fast speed using InterTech MED75y two independent channel test instrument. Each lumen of the catheter is either leak or flow tested under 2.0 seconds. ...
Manufactured by:Nordion (Canada) Inc. based inOttawa, ONTARIO (CANADA)
Nordion is the world’s leading supplier of Cobalt-60 (Co-60) sources for gamma processing. This source model, the C-188, is double encapsulated and delivers the industry standard in performance, reliability, and service in gamma ...
Manufactured by:Sotera Health based inBroadview Heights, OHIO (USA)
Nordion is the world’s leading supplier of Cobalt-60 (Co-60) sources for gamma processing. This source model, the C-188, is double encapsulated and delivers the industry standard in performance, reliability, and service in gamma ...
Manufactured by:Sotera Health based inBroadview Heights, OHIO (USA)
Based on a gas diffusion process, Ethylene Oxide (EO or ETO) is capable of sterilizing and rendering products free of viable microorganisms. Sterility occurs when an EO gas molecule reacts with and destroys the microbial DNA. The process requires the simultaneous control of four variables, but interdependent parameters: gas concentration, temperature, relative humidity, and time of exposure. EO ...
Manufactured by:Sotera Health based inBroadview Heights, OHIO (USA)
A form of electromagnetic energy characterized by its deep penetration and low-dose rates, Gamma irradiators are powered by Cobalt-60, effectively killing microorganisms throughout the product and its packaging with very little temperature effect and no residues. The amount of radiation received depends on the type of product and its dose requirements. Dosimetric release allows products to be ...
Manufactured by:priMED Medical Products, Inc. based inEdmonton, ALBERTA (CANADA)
While PRIMAGARD is the most prominent single-use medical headwear line in the Canadian market, priMED continues to innovate in the category. Over the years we’ve introduced better—more fluid resistant materials to help increase user protection. We’ve also introduced various colours to offer a more diverse style to the user and innovated our designs to remain the leader in user ...
Manufactured by:Plasticase, Inc. based inTerrebonne, QUEBEC (CANADA)
NANUK PROTECTS MEDICAL EQUIPMENT AT ALL COSTS. Known as the world’s best protective cases, NANUK safeguards your lifesaving equipment so your users can count on them to work without fail. DO OR DIE PROTECTION:NANUK indestructible cases safeguard fragile, sophisticated equipment from the repeated blows, drops and shocks that happen during emergencies. Crushproof: Made from crushproof ...
Manufactured by:Laboquest Inc. based inWestchester, ILLINOIS (USA)
Medical Mobile Cooler MMC 4000 is designed for easy transportation of medical products or store the blood, plasma at three range of temperatures. Provided with functional and protective alarms for safety purposes to avoid any hazards to ...