Refine by
Products Medical Equipment Supplied In Canada
37 equipment items found
Manufactured by:Southmedic Inc. based inBarrie, ONTARIO (CANADA)
The Southmedic MDI Adaptor is an Adult Metered Dose Inhaler (MDI) Adaptor for use with the new MDI with dose counters as well as traditional MDI canisters. The SMDIA-1000 can remain in line with the breathing circuit as directed by physician and/or hospital protocol. It is compatible with both plastic and metal canister stems. Arrows clearly mark the direction of flow. It is equipped with a ...
Manufactured by:Southmedic Inc. based inBarrie, ONTARIO (CANADA)
Endotracheal Tube Protector, Adult, Triple Security Ring, 6.5mm-9.5mm. Unit of Measure; ...
Manufactured by:Southmedic Inc. based inBarrie, ONTARIO (CANADA)
Side Stream CO2 Sampling with simultaneous oxygen delivery. Soft nasal prongs designed to efficiently and comfortably deliver O2. Anatomically designed block provides a stable fit without twisting. CO2 is collected at the nares with a supplemental port to collect orally, while supplemental O2 is delivered upwards to the ...
Manufactured by:Southmedic Inc. based inBarrie, ONTARIO (CANADA)
The Southmedic Endotracheal Tube Protector, or Bite Block, is designed to fit multiple sizes of endotracheal tubes (ET Tubes). An ET Tube is a catheter inserted into the trachea through the mouth or nose used to maintain an open air passage to deliver oxygen or permit suctioning of mucus or to prevent aspiration of the stomach contents. Southmedic Bite Block is made from a non PVC environmentally ...
Manufactured by:Southmedic Inc. based inBarrie, ONTARIO (CANADA)
During exhalation, although exhaled carbon dioxide escapes through the mask openings, it is also sampled through the diffuser cup. The cup is attached to a sampling line that can be connected to a side stream monitor to obtain EtCO2 readings. It is available in three sizes; standard adult, plus and ...
Manufactured by:Southmedic Inc. based inBarrie, ONTARIO (CANADA)
The Capnoxygen® mask is an oxygen mask with breath to breath monitoring for non-intubated patients. It allows sampling of exhaled carbon dioxide from both the mouth and nose while at the same time administering oxygen. Not made with natural rubber latex, the mask is soft and allows form-fitting comfort for the face. It is available in three sizes; standard adult, adult ophthalmic with a lower ...
Manufactured by:Capintec - Mirion Technologies, Inc based inAtlanta, GEORGIA (US) (USA)
The Pain Management C-Arm Table 870 is designed for image-guided fluoroscopic procedures where stability, access, and precise, quiet, vibration-free positioning are essential. A cantilevered low attenuation carbon-fiber tabletop, with choice of contoured or rectangular design, accommodates portable or ceiling-suspended C-Arms. The standard contoured top with face cutout provides ample workspace ...
Manufactured by:Capintec - Mirion Technologies, Inc based inAtlanta, GEORGIA (US) (USA)
An ideal choice for private practices, the Surgical C-Arm Table 846 provides a cost-effective option where stable, precise, quiet and vibration-free positioning is needed. A cantilevered low attenuation carbon-fiber tabletop, with choice of contoured or rectangular design, accommodates portable or ceiling-suspended C-Arms. Its large radiolucent area, motorized actuation of height, and free-float ...
Manufactured by:Capintec - Mirion Technologies, Inc based inAtlanta, GEORGIA (US) (USA)
The Brachytherapy C-Arm Table 810 features a radiolucent extension that provides capability for brachytherapy treatment involving the upper body and general C-Arm applications. The tabletop is cantilevered to accommodate portable or ceiling-suspended C-Arms and the wider front leg stance offers optimal patient access. Motorized actuation of height, X-Y, lateral roll and Trendelenburg motions of ...
Manufactured by:Capintec - Mirion Technologies, Inc based inAtlanta, GEORGIA (US) (USA)
The Urology C-Arm Table 800 is an ideal choice for urologic abdominal cavity image-guided procedures. The tabletop is cantilevered to accommodate portable or ceiling-suspended C-Arms and the wider front leg stance offers optimal patient access. The tabletop easily accommodates bariatric patients while the radiolucent area allows for full fluoroscopic visualization. This functional design offers ...
Manufactured by:Capintec - Mirion Technologies, Inc based inAtlanta, GEORGIA (US) (USA)
With an advanced low attenuation float top for cardiovascular, endoscopic and pain management procedures, the Surgical C-Arm Table 840 is the ideal choice when stability, access, and precise, quiet, vibration-free positioning are essential. A cantilevered low attenuation carbon-fiber tabletop, with choice of rectangular or contoured design, accommodates portable or ceiling-suspended C-Arms. The ...
Manufactured by:Southmedic Inc. based inBarrie, ONTARIO (CANADA)
The Southmedic Clear Choice™ Eye Shields provide a cost-effective, comfortable, distortion-free solution with a reusable ...
Manufactured by:Southmedic Inc. based inBarrie, ONTARIO (CANADA)
The Southmedic Clear Choice Face Shields provide a cost-effective, comfortable, distortion-free solution with a reusable ...
Manufactured by:Southmedic Inc. based inBarrie, ONTARIO (CANADA)
The Southmedic Clear Choice Foam Face Shields provide light-weight, comfortable, distortion-free splash ...
Manufactured by:Capintec - Mirion Technologies, Inc based inAtlanta, GEORGIA (US) (USA)
The CRC-77tHR calibrator’s performance and reliability have been designed to meet the unique and demanding needs of the isotope manufacturing and radiopharmaceutical production environments. The software is designed for rapid repeatable measurement functions often required in production, and includes a fully automated Quality Assurance Program. Hardware is carefully designed to minimize the ...
Manufactured by:priMED Medical Products, Inc. based inEdmonton, ALBERTA (CANADA)
While PRIMAGARD is the most prominent single-use medical headwear line in the Canadian market, priMED continues to innovate in the category. Over the years we’ve introduced better—more fluid resistant materials to help increase user protection. We’ve also introduced various colours to offer a more diverse style to the user and innovated our designs to remain the leader in user ...
Manufactured by:Capintec - Mirion Technologies, Inc based inAtlanta, GEORGIA (US) (USA)
The CRC-PC Smart Chamber combines the well-known and highly reliable measurement Capintec™ chamber with an innovative web-based user interface to meet today’s business requirements. Remote connectivity and network-ready interface set the Smart Chamber apart as the most advanced in dose calibration. The CRC-PC Smart Chamber is available in two fill pressures. For unit dose hot labs, ...
Manufactured by:White Mountain Imaging based inWebster, NEW HAMPSHIRE (USA)
A high-performing digital x-ray suite on wheels, FDR Go PLUS features an effortless retractable column design, responsive smooth, quiet drive, and convenient positioning controls to provide amazing flexibility easily within reach of the technologist. Acquire sharp images at low dose, quickly, reliably, and precisely. Workflow and images are complimented with a built-in 19 inch touchscreen ...
Manufactured by:SMP Canada Corporation. based inRichmond Hill, ONTARIO (CANADA)
The SMP 3-Mode Intermittent/Continuous Vacuum Regulator allows for both Intermittent and Continuous modes of surgical suction. With its durable design and construction, this vacuum regulator offers maximum performance and minimum maintenance allowing it to be the ideal choice of medical practitioners ...
Manufactured by:Technimount System based inQuebec City, QUEBEC (CANADA)
The Cardiatek system is the only universal solution to mount the Automated Impella Controller (AIC) in different applications such as on surface, floor and wall systems. It is also designed to fit any ground and air ambulance configuration in North American and European markets. This innovative system secures the medical device during transport to avoid possible injuries to patient and crew. It ...