Refine by
Locations
- Europe
- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia & Herzegovina
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Greece
- Hungary
- Iceland
- Ireland
- Italy
- Kosovo
- Latvia
- Liechtenstein
- Lithuania
- Luxembourg
- Macedonia
- Malta
- Moldova
- Monaco
- Montenegro
- Netherlands
- Northern Ireland
- Norway
- Poland
- Portugal
- Romania
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Turkey
- Ukraine
- United Kingdom
- Vatican City
Medical Gas Equipment Equipment Supplied In Europe
36 equipment items found
Manufactured by:Koyuncu Ticaret A.Ş. based inEsenkent, Ümraniye, TURKEY
Liquid nitrogen systems we offer in various models and capacities, allow long-term storage of biological ...
Manufactured by:Koyuncu Ticaret A.Ş. based inEsenkent, Ümraniye, TURKEY
TPED Certified Manifolded Cylinder ...
Manufactured by:Behringer srl based inGenova, ITALY
Pressure regulator for cylinders, suitable for medical gases, equipped with dual pressure gauge to show high and low pressure, used on outlet of cylinders to reduce the pressure down to the line or equipment set.Maximum inlet pressure is 200 bar, the outlet pressure is adjustable up to 12 bar.The gas inlet connection is specific ...
Manufactured by:Behringer srl based inGenova, ITALY
Pressure regulator for cylinders, suitable for medical gases, equipped with dual pressure gauge to show high and low pressure, used on the outlet of cylinders to reduce the pressure down to the line or equipment set.Maximum inlet pressure is 200 bar, the outlet pressure is adjustable up to 12 bar.The inlet connection is specific to the ...
Manufactured by:Behringer srl based inGenova, ITALY
Pressure regulator for cylinders, suitable for medical gases, equipped with single pressure gauge to show cylinder pressure, used on cylinder outlets to reduce the pressure down to the line or equipment set.Maximum inlet pressure is 200 bar, the outlet pressure is adjustable up to 4 bar.The gas inlet connection is specific to the ...
Manufactured by:Behringer srl based inGenova, ITALY
The P/AVB area valve is developed to meet the safety requirements of Standard 7396-1 and at the same time guarantee notable savings in terms of the time required for installation and building work, to achieve this we managed to combine the pendant shut-off valve with the area valve; the area valve can be fitted with a valve status sensor. The valve also has an emergency inlet and a block for ...
Manufactured by:Behringer srl based inGenova, ITALY
Cylinder connection manifold made with a single brass manifold, with two or three places; specific gas connection; non-return valve built-in in the inlet connection. It is made of materials compatible with the gases and applicable standards in medical gas field. The identification takes place through the indication of the name and/or symbol of the supplied gas and the production batch stamped on ...
Manufactured by:Behringer srl based inGenova, ITALY
Flexible connection made of Ø 8 mm chemically nickel-plated copper pipe, used to make a High Pressure connection between the cylinder and the manifold or control module; the connection nuts are also chemically nickel-plated CW614N brass, with a specific thread for the type of ...
Manufactured by:Behringer srl based inGenova, ITALY
Medium/high flow rate control panel for medicinal gases, available both with automatic change-over and manual reset and fully automatic; both versions are available with pressure switch; consisting of two double reduction lines, it guarantees continuous supply with high pressure stability; complete with manifolf exaust valve; the outlet connector is for a Ø 22 mm welded pipe; its maximum ...
Manufactured by:Behringer srl based inGenova, ITALY
Copper connection fitting for connecting two high pressure ramps or at the inlet of the decompression panel. The swivel nuts are gas specific threads in accordance with the ...
Manufactured by:Behringer srl based inGenova, ITALY
1st stage compressed gas manifols, medium / high flow rate for medical gases, available both with automatic change - over and manual reset and fully automatic; both versions are available with pressure switch or transducer; consisting of two double-head reduction lines, it guarantees continuity of supply with high stability at the operating pressure of 5 bar; complete with ramp purge valves; very ...
Manufactured by:Behringer srl based inGenova, ITALY
Panel III compressed gas source for medical gases, suitable for installation downstream of the reserve source; equipped with pressure switch and ramp purge valve; composed of a double-head reduction line, it guarantees a continuity of supply with high pressure stability; It is completed by a powder-coated steel plate and a white polycarbonate lid ...
Manufactured by:Behringer srl based inGenova, ITALY
High flow rate control panel for oxygen, with automatic change-over and available both with reset and automatic; calibrated at 9 bar at the outlet, it reaches a maximum flow rate of 135 mc / h in oxygen in the manual reset version, 110 mc / h in the fully automatic version; it is available with pressure switch or transducer; consisting of two double reduction lines, it guarantees continuous ...
Manufactured by:TRATO TLV based inRoubaix, FRANCE
The FLUIDYS bed head unit offers many possible options for integrating electrical and medical gas ...
Manufactured by:Connect Medical Systems Limited (CMS) based inLancashire, UNITED KINGDOM
The Connect Medical Systems Medical Gas Hoses are suitable for installation into piped medical gas installations or laboratory environment. It includes gas specific NIST connectors to make connections to Medical Gas Outlet Points in use in ceiling ...
Manufactured by:DZ Medicale based inPalazzolo, ITALY
For some years, in parallel with the manufacture of devices, we have decided to complete the company offer, perfecting our services aiming at improving customer satisfaction starting from the design, installation, expansion and adaptation and maintenance of the same systems, marking the product in compliance to Directive 93/42 / EEC and ss. mm. relating to medical devices.We develop management, ...
Manufactured by:DEXTHER MEDICAL based inMeaux, FRANCE
The Dexther medical air flowmeter is used to fix a gas flow value corresponding to the medical prescription. It is connected to terminal units of medical gas distribution systems. ...
Manufactured by:TRATO TLV based inRoubaix, FRANCE
SECURIDYS 816 (8 analog inputs and 16 logic inputs) units have been awarded the CE Marking. They can be configured according to your needs, to monitor medical compressed gas distribution and vacuum systems in accordance with the standards and regulations in force. The analog and logic channels on eight different networks (sources, tanks, compressors…) can all be monitored by the same unit. ...
Manufactured by:Megasan Medical Gas Systems based inÇankiri, TURKEY
Zone control Units provide opening and closure of gas lines, warns when the pressure goes out of set ranges. Displays an instant pressure value on the LCD screen. Setting option allows you to set pressure range values very easily. Language option is available on the control panel. Units can be installed as surface mount or flush ...
Manufactured by:DZ Medicale based inPalazzolo, ITALY
The Bed Head Unit “Girasole”, for lighting and medical gas systems, is built with an extruded aluminum profile and subsequently painted with non-toxic white paint. The lighting and electrical composition can be widely customized, and includes ambient lighting, for reading and visiting, and night lighting, a light point suitable for night ...