Refine by
Locations
- Europe
- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia & Herzegovina
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Greece
- Hungary
- Iceland
- Ireland
- Italy
- Kosovo
- Latvia
- Liechtenstein
- Lithuania
- Luxembourg
- Macedonia
- Malta
- Moldova
- Monaco
- Montenegro
- Netherlands
- Northern Ireland
- Norway
- Poland
- Portugal
- Romania
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Turkey
- Ukraine
- United Kingdom
- Vatican City
Total Hip Arthroplasty Equipment Supplied In Europe
9 equipment items found
Manufactured by:Biotechni based inLa Ciotat, FRANCE
Femoral stem for Total hip arthroplasty and hemiarthroplasty. Version Titanium Press-fit stem with Porous Ti+HA coating in metaphysis and HA only in diaphysis, Version Stainless Steel to be Cemented, mirror-polished finish. 10 sizes (from 130 to 190mm lengths). 135° CCD angle for coated stems with or without collar, and cemented. 130° CCD ...
Manufactured by:3D Medical based inMarolles-en-Brie, FRANCE
Acetabular bone loss is a challenging problem in revision total hip arthroplasty. Customs strategy allows to fit the implant to the residual host bone, bypassing the bony deficiency and restoring hip ...
Manufactured by:GO German Orthopedic Implants GmbH based inHamburg, GERMANY
All the cemented Acetabular Cups can be implanted via any standard approach for total hip arthroplasty, depending on the surgeon's level of ...
Manufactured by:Euromed Implants GmbH based inStade, GERMANY
The Zweymüller stem is the original tapered stem with a rectangular cross section and has been implanted since 1979. Since its introduction, the Zweymüller has established high standards for total hip arthroplasty with his design features, the excellent clinical results, and a technically simple surgical ...
Manufactured by:GO German Orthopedic Implants GmbH based inHamburg, GERMANY
for total hip arthroplasty are small ceramic balls that are placed onto the hip stem. Due to the conical design of the 12/14 taper, the heads sit firmly on the stem and require no additional fixation. EasyHip Ceramic Heads come in three diameters (28 mm, 32 mm and 36 mm) and four head neck lengths, ranging from -4 mm to +8 mm. ...
Manufactured by:Groupe Lepine based inGENAY, FRANCE
The titanium alloy TARGOS™ Mini self-locking femoral stem with collar is intended for cementless implants. It controls the sinking and preserves the spongy hip bone structure. This shortened stem provides a solution adapted to the indications of total hip arthroplasty in young active patients and is perfectly suited for a ...
Manufactured by:Medical Brace based inAthens, GREECE
Adjustable lumbar-thigh Hip brace abductive with immobilization UNI-HIP ...
Manufactured by:Smith & Nephew plc based in, UNITED KINGDOM
The BIRMINGHAM HIP◊ Resurfacing (BHR◊) System is a conservative approach to hip arthroplasty in which an all-metal bearing couple is used to preserve, rather than replace, a patient’s femoral head and neck. It was first implanted in July 1997, and was approved for use in the United States by the Food and Drug Administration in 2006. Since its introduction, there have been over ...
Manufactured by:Microport Orthopedics Inc. based inArlington, TENNESSEE (USA)
The Profemur® line of primary hip stems has an established clinical history. Each Profemur® hip stem offers its own philosophy to provide fixation and replace bone anatomy. Triple taper stem philosophy" Designed for primary hip replacement surgery, the Profemur® Gladiator® hip stem is a triple tapered wedge stem with a distinct geometry. The hip stem is designed with a reduced ...