Refine by
Biomedical Equipment Supplied In France
33 equipment items found
Manufactured by:Tesalys - Sterishred Division based inSaint-Jean, FRANCE
The TESATRUCK (developed in partnership with Toutenkamion) is a safe solution for treatment of healthcare waste in case of disaster management, in remote or rural areas, or even in hospitals that require additional treatment capacity without the need of infrastructure. ...
Manufactured by:Tesalys - Sterishred Division based inSaint-Jean, FRANCE
STERISHRED® 250 is a modern compact on-site solution for treating infectious healthcare waste using a non-burn thermal process (steam sterilization) at 135°C. It simultaneously shreds and sterilizes biohazardous waste including sharps in minutes! ...
Manufactured by:Tesalys - Sterishred Division based inSaint-Jean, FRANCE
Tesalys STERIPLUS systems are the ideal solution to safely inactivate your infectious waste on site. Their integrated TESASHRED shredding system not only allows a consequent reduction in the volume and weight of waste, but also guarantees their treatment at ...
Manufactured by:Tesalys - Sterishred Division based inSaint-Jean, FRANCE
Tesalys STERIPLUS systems are the ideal solution to safely inactivate your infectious waste on site. Their integrated TESASHRED shredding system not only allows a consequent reduction in the volume and weight of waste, but also guarantees their treatment at ...
Manufactured by:Tesalys - Sterishred Division based inSaint-Jean, FRANCE
Tesalys STERIPLUS systems are the ideal solution to safely inactivate your infectious waste on site. Their integrated TESASHRED shredding system not only allows a consequent reduction in the volume and weight of waste, but also guarantees their treatment at ...
Manufactured by:TRATO TLV based inRoubaix, FRANCE
SECURIDYS 816 (8 analog inputs and 16 logic inputs) units have been awarded the CE Marking. They can be configured according to your needs, to monitor medical compressed gas distribution and vacuum systems in accordance with the standards and regulations in force. The analog and logic channels on eight different networks (sources, tanks, compressors…) can all be monitored by the same unit. ...
Manufactured by:InterTech Development Company based inSkokie, ILLINOIS (USA)
InterTech provides total test solutions for testing various types of catheters. For instance, multi-lumen catheters are sequentially leak and flow tested at a fast speed using InterTech MED75y two independent channel test instrument. Each lumen of the catheter is either leak or flow tested under 2.0 seconds. ...
Manufactured by:InterTech Development Company based inSkokie, ILLINOIS (USA)
Proven InterTech Microscale Technology measures leaks down to the equivalent of a 0.5 micron defect diameter. A careful review of application requirements including the Maximum Allowable Leakage Limit (MALL) will dictate the test method used. Testing is consistent with ASTM requirements (F-3287-17, F-2338-09). Proprietary technology is available for testing with minimal headspace volumes. ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
SI021 - FEP Membranes, 15 in the ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
SI020 1302 Service Kit (with PP Jackets). These kits are used to service our Strathtox Instrument and our Biomed ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
The oxygen content of blood can be measured accurately and quickly by the method of Tucker (1967). A small sample of blood is introduced into the chamber containing a solution of ferricyanide. The resulting release of bound oxygen produces an increase in PO2 which is detected by the oxygen electrode. The oxygen content can be calculated from the PO2 change. The base section of the TC 500 is ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
For continuous in-line oxygen monitoring or for connection to a flow-through respirometer chamber. The acrylic chamber of the flowcell forms a threaded connection to the integral electrode holder. Only the tip of the electrode projects into the water flow. The inlet and outlet tubes are made from stainless steel. To enable the flowcell to be immersed below the surface of the constant temperature ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
This is a Clark-type polarographic electrode, with a 22 micron diameter platinum cathode and silver/silver chloride anode, connected by a buffered potassium chloride electrolyte solution. In the normal configuration the cathode is covered with a relatively low permeability polypropylene membrane, in order for the electrode to be used in unstirred solutions or where minimal stirring is required. ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
For use with custom designed respiration chambers. The electrode holder is a black acetal cylinder in which the electrode is located so that its tip projects from the end. The holder is used for the insertion of the electrode into the customers’ own respiration chamber. An acrylic collar containing an “O” ring on its inside surface is also provided. This can be cemented over a ...
Premium
Manufactured by:Bertin Technologies based inMontigny-le-Bretonneux, FRANCE
Its fully electric system combines shredding and microwave sterilization in a single 50-liter chamber, converting biomedical waste into dry, inert material similar to household waste in under 30 minutes. Requiring only 7 m² of space, this Plug & Play solution reduces waste volume by 85% and weight by 25%. Compliant with STAATT and NF X30-503 standards, Sterilwave 50 helps ...
Premium
Manufactured by:Bertin Technologies based inMontigny-le-Bretonneux, FRANCE
Sterilwave 440 is an on-site solution for the treatment of up to 88kg/h of biomedical waste. Sterilwave 440 is the largest equipment of the Sterilwave range developed and marketed by Bertin Medical Waste for the on-site treatment of biohazardous waste. Compact and safe, Sterilwave 440 transforms bio-hazardous waste into unrecognizable and inert municipal waste thanks to a 100% ...
Premium
Manufactured by:Bertin Technologies based inMontigny-le-Bretonneux, FRANCE
Sterilwave 100 is an on-site solution for the treatment of up to 20kg/h of biomedical waste. Sterilwave 100 is the most compact equipment of the Sterilwave range developed and marketed by Bertin Medical Waste for the on-site treatment of biohazardous waste. Compact and safe, Sterilwave 100 transforms bio-hazardous waste into unrecognizable and inert municipal waste thanks to a ...
Premium
Manufactured by:Bertin Technologies based inMontigny-le-Bretonneux, FRANCE
Sterilwave 250 is an on-site solution for the treatment of up to 50kg/h of biomedical waste. Sterilwave 250 is a compact equipment developed and marketed by Bertin Medical Waste for the on-site treatment of biohazardous waste. Compact and safe, Sterilwave 250 transforms bio-hazardous waste into unrecognizable and inert municipal waste thanks to a 100% electric process combing ...
Premium
Manufactured by:Bertin Technologies based inMontigny-le-Bretonneux, FRANCE
Using a fully electric process, it combines shredding and microwave sterilization within a 900-liter chamber, converting biomedical waste into dry, inert material. Tailored for hospitals and waste management operators, it ensures up to 8log10 microbial inactivation while significantly reducing waste volume by 85% and weight by 25%. Compact, robust, and compliant with ...
Manufactured by:BIOLUME RESINOR based inLoos, FRANCE
This combination of the Ergo 600 movable arm with the Ergo 300 column is the ideal solution for a perfect mobile and total safe system for biomedical equipment on a rigid suspended system This configuration allows a total work station space where the size of the room is restricted. Movable systems can consist of one or two arms for giving total movement towards the beds infusion ...