Refine by
Medical Gas Supply System Equipment Supplied In Italy
18 equipment items found
Manufactured by:Behringer srl based inGenova, ITALY
Copper connection fitting for connecting two high pressure ramps or at the inlet of the decompression panel. The swivel nuts are gas specific threads in accordance with the ...
Manufactured by:Behringer srl based inGenova, ITALY
Cylinder connection manifold made with a single brass manifold, with two or three places; specific gas connection; non-return valve built-in in the inlet connection. It is made of materials compatible with the gases and applicable standards in medical gas field. The identification takes place through the indication of the name and/or symbol of the supplied gas and the production batch stamped on ...
Manufactured by:DZ Medicale based inPalazzolo, ITALY
For some years, in parallel with the manufacture of devices, we have decided to complete the company offer, perfecting our services aiming at improving customer satisfaction starting from the design, installation, expansion and adaptation and maintenance of the same systems, marking the product in compliance to Directive 93/42 / EEC and ss. mm. relating to medical devices.We develop management, ...
Manufactured by:Behringer srl based inGenova, ITALY
Flexible connection made of Ø 8 mm chemically nickel-plated copper pipe, used to make a High Pressure connection between the cylinder and the manifold or control module; the connection nuts are also chemically nickel-plated CW614N brass, with a specific thread for the type of ...
Manufactured by:Behringer srl based inGenova, ITALY
Pressure regulator for cylinders, suitable for medical gases, equipped with dual pressure gauge to show high and low pressure, used on outlet of cylinders to reduce the pressure down to the line or equipment set.Maximum inlet pressure is 200 bar, the outlet pressure is adjustable up to 12 bar.The gas inlet connection is specific to the gas type, the outlet is fitted with an Ø 6 hose ...
Manufactured by:Behringer srl based inGenova, ITALY
Pressure regulator for cylinders, suitable for medical gases, equipped with dual pressure gauge to show high and low pressure, used on the outlet of cylinders to reduce the pressure down to the line or equipment set.Maximum inlet pressure is 200 bar, the outlet pressure is adjustable up to 12 bar.The inlet connection is specific to the gas type, the outlet is fitted with an Ø 6 hose ...
Manufactured by:Behringer srl based inGenova, ITALY
Pressure regulator for cylinders, suitable for medical gases, equipped with single pressure gauge to show cylinder pressure, used on cylinder outlets to reduce the pressure down to the line or equipment set.Maximum inlet pressure is 200 bar, the outlet pressure is adjustable up to 4 bar.The gas inlet connection is specific to the gas type, the outlet is fitted with a G1/4" M R connector.Its ...
Manufactured by:Behringer srl based inGenova, ITALY
The P/AVB area valve is developed to meet the safety requirements of Standard 7396-1 and at the same time guarantee notable savings in terms of the time required for installation and building work, to achieve this we managed to combine the pendant shut-off valve with the area valve; the area valve can be fitted with a valve status sensor. The valve also has an emergency inlet and a block for ...
Manufactured by:DZ Medicale based inPalazzolo, ITALY
The Bed Head Unit “Girasole”, for lighting and medical gas systems, is built with an extruded aluminum profile and subsequently painted with non-toxic white paint. The lighting and electrical composition can be widely customized, and includes ambient lighting, for reading and visiting, and night lighting, a light point suitable for night ...
Manufactured by:Behringer srl based inGenova, ITALY
1st stage compressed gas manifols, medium / high flow rate for medical gases, available both with automatic change - over and manual reset and fully automatic; both versions are available with pressure switch or transducer; consisting of two double-head reduction lines, it guarantees continuity of supply with high stability at the operating pressure of 5 bar; complete with ramp purge valves; very ...
Manufactured by:Behringer srl based inGenova, ITALY
Panel III compressed gas source for medical gases, suitable for installation downstream of the reserve source; equipped with pressure switch and ramp purge valve; composed of a double-head reduction line, it guarantees a continuity of supply with high pressure stability; It is completed by a powder-coated steel plate and a white polycarbonate lid that is light and practical to ...
Manufactured by:Delta P S.r.l. based inRosate (MI), ITALY
These units are realised according to the ISO 7396-1and are suitable to be installed in certified medical gas pipeline systems. The third source unit according to the normative must be able to supply gas to the pipeline system in case of malfunction of the primary ...
Manufactured by:Behringer srl based inGenova, ITALY
Medium/high flow rate control panel for medicinal gases, available both with automatic change-over and manual reset and fully automatic; both versions are available with pressure switch; consisting of two double reduction lines, it guarantees continuous supply with high pressure stability; complete with manifolf exaust valve; the outlet connector is for a Ø 22 mm welded pipe; its maximum ...
Manufactured by:Behringer srl based inGenova, ITALY
High flow rate control panel for oxygen, with automatic change-over and available both with reset and automatic; calibrated at 9 bar at the outlet, it reaches a maximum flow rate of 135 mc / h in oxygen in the manual reset version, 110 mc / h in the fully automatic version; it is available with pressure switch or transducer; consisting of two double reduction lines, it guarantees continuous ...
Manufactured by:Delta P S.r.l. based inRosate (MI), ITALY
This unit has been realized according to the ISO 7396-1 and it is suitable to be installed in certified medical gas pipeline systems. The double stage reducing system with separate reducers makes this specific unit perfectly suitable to be used also with systems that use the full reduction at the unit level with low pressure output(5 ...
Manufactured by:Siare Engineering International Group based inCrespellano Valsamoggia (BO), ITALY
The MORPHEUS ND represents a real innovation in the field of anesthesia, designed with the help of proven ...
Manufactured by:NOXERIOR S.r.l. based inGrosseto, ITALY
NOXERIOR offers a wide choice of medical gas systems to ensure the safe and efficient distribution of the gases in the piping network of the healthcare facility, from the medical gas plant room to the patient room. ...
Manufactured by:NOXERIOR S.r.l. based inGrosseto, ITALY
This solution is an innovative device allowing the measurement of the Medical Gas flow and consumption in healthcare facilities. This user friendly wall-mounted system can measure either the total consumption of a facility or of a single area when placed at the inlet of a secondary Medical Gas ...