Refine by
Pressure Gauge Equipment Supplied In Italy
14 equipment items found
Manufactured by:Behringer srl based inGenova, ITALY
The P/AVB area valve is developed to meet the safety requirements of Standard 7396-1 and at the same time guarantee notable savings in terms of the time required for installation and building work, to achieve this we managed to combine the pendant shut-off valve with the area valve; the area valve can be fitted with a valve status sensor. The valve also has an emergency inlet and a block for ...
Manufactured by:Agri Perrone Srl based inGuagnano (LE), ITALY
High density polyethylene tanks for circuit washing. Lavarnani, level indicator. internal product mixer and stirrer. Pressure gauge, remote control. Dosaton stainless steel liter counter with graduated and drip-proof scale. Predisposition for manual ...
Manufactured by:Behringer srl based inGenova, ITALY
Pressure regulator for cylinders, suitable for medical gases, equipped with dual pressure gauge to show high and low pressure, used on outlet of cylinders to reduce the pressure down to the line or equipment set.Maximum inlet pressure is 200 bar, the outlet pressure is adjustable ...
Manufactured by:Behringer srl based inGenova, ITALY
Pressure regulator for cylinders, suitable for medical gases, equipped with dual pressure gauge to show high and low pressure, used on the outlet of cylinders to reduce the pressure down to the line or equipment set.Maximum inlet pressure is 200 bar, the outlet pressure is ...
Manufactured by:Behringer srl based inGenova, ITALY
Pressure regulator for cylinders, suitable for medical gases, equipped with single pressure gauge to show cylinder pressure, used on cylinder outlets to reduce the pressure down to the line or equipment set.Maximum inlet pressure is 200 bar, the outlet pressure is adjustable up ...
Manufactured by:Behringer srl based inGenova, ITALY
1st stage compressed gas manifols, medium / high flow rate for medical gases, available both with automatic change - over and manual reset and fully automatic; both versions are available with pressure switch or transducer; consisting of two double-head reduction lines, it guarantees continuity of supply with high stability at the operating pressure of 5 bar; complete with ramp purge valves; very ...
Manufactured by:Behringer srl based inGenova, ITALY
Panel III compressed gas source for medical gases, suitable for installation downstream of the reserve source; equipped with pressure switch and ramp purge valve; composed of a double-head reduction line, it guarantees a continuity of supply with high pressure stability; It is completed by a powder-coated steel plate and a white polycarbonate lid that is light and practical to ...
Manufactured by:Delta P S.r.l. based inRosate (MI), ITALY
These units are realised according to the ISO 7396-1and are suitable to be installed in certified medical gas pipeline systems. The third source unit according to the normative must be able to supply gas to the pipeline system in case of malfunction of the primary ...
Manufactured by:Behringer srl based inGenova, ITALY
Medium/high flow rate control panel for medicinal gases, available both with automatic change-over and manual reset and fully automatic; both versions are available with pressure switch; consisting of two double reduction lines, it guarantees continuous supply with high pressure stability; complete with manifolf exaust valve; the outlet connector is for a Ø 22 mm welded pipe; its maximum ...
Manufactured by:Camfil Air Pollution Control (APC) based inJonesboro, ARKANSAS (USA)
Farr Gold Series Camtain Options: Containment systems and other equipment options designed specifically for the GS Camtain in pharmaceutical applications are ...
Manufactured by:Behringer srl based inGenova, ITALY
High flow rate control panel for oxygen, with automatic change-over and available both with reset and automatic; calibrated at 9 bar at the outlet, it reaches a maximum flow rate of 135 mc / h in oxygen in the manual reset version, 110 mc / h in the fully automatic version; it is available with pressure switch or transducer; consisting of two double reduction lines, it guarantees continuous ...
Manufactured by:Delta P S.r.l. based inRosate (MI), ITALY
This unit has been realized according to the ISO 7396-1 and it is suitable to be installed in certified medical gas pipeline systems. The double stage reducing system with separate reducers makes this specific unit perfectly suitable to be used also with systems that use the full reduction at the unit level with low pressure output(5 ...
Manufactured by:NOXERIOR S.r.l. based inGrosseto, ITALY
NOXERIOR offers a wide choice of medical gas systems to ensure the safe and efficient distribution of the gases in the piping network of the healthcare facility, from the medical gas plant room to the patient room. ...
Manufactured by:Camfil Air Pollution Control (APC) based inJonesboro, ARKANSAS (USA)
The dust collector designed specifically for pharmaceutical and containment ...