- Home
- Equipment
- north america
- femoral head
Show results for
Refine by
Femoral Head Equipment Supplied In North America
30 equipment items found
Manufactured by:Tecomet, Inc. based inWilmington, MASSACHUSETTS (USA)
Tecomet is your partner for fully finished, tight tolerance femoral heads that are complete and ready for ...
Manufactured by:Maxx Orthopedics, Inc. based inNorristown, PENNSYLVANIA (USA)
Double tapered press fit femoral stem designed to provide rotational and axial stability. Three offset options to facilitate restoration of hip ...
Manufactured by:Maxx Orthopedics, Inc. based inNorristown, PENNSYLVANIA (USA)
Double tapered, modular stem with a highly polished surface designed for cemented implantation. Standard and Narrow stem options to facilitate better anatomic fit and restoration of hip ...
Manufactured by:United Orthopedic Corporation (UOC) USA Inc. based inIrvine, CALIFORNIA (USA)
Bipolar II can be used in hemi-arthroplasty which is indicated in the case of femoral neck fracture, trauma, and the early-stage avascular necrosis when the acetabulum remains intact. ...
Manufactured by:Maxx Orthopedics, Inc. based inNorristown, PENNSYLVANIA (USA)
Porous Titanium coated modular shells designed for use with HLXPE modular liners. Compatible with CoCr and Biolox modular femoral ...
Manufactured by:Smith & Nephew plc based in, UNITED KINGDOM
The Bipolar Prostheses are available in 22 sizes (39-60mm, in 1mm increments) and can be combined with a 22mm diameter femoral head (39-42) and a 28mm diameter femoral head ...
Manufactured by:Ortho Development Corporation based inDraper, UTAH (USA)
The Pivot Bipolar has a simple one-step assembly interface between the femoral head and the compression-molded liner that requires no instrumentation and reduces O.R. time. The Solitude Unipolar offers simple intraoperative ...
Manufactured by:United Orthopedic Corporation (UOC) USA Inc. based inIrvine, CALIFORNIA (USA)
U-Motion II is a comprehensive acetabular hip system offers a wide range of acetabular cup, liner, and femoral head prostheses options for primary and revision hip ...
Manufactured by:United Orthopedic Corporation (UOC) USA Inc. based inIrvine, CALIFORNIA (USA)
Made from XPE (Highly Crosslinked Polyethylene), the cemented cup is designed to provide optimal stability and improved longevity. The Full XPE Cup can be combined with a larger size femoral head to improve range of motion and reduce the potential for dislocation. For patients with severe bone loss, the Full XPE Cup may be used with United’s Locking Cage. ...
Manufactured by:United Orthopedic Corporation (UOC) USA Inc. based inIrvine, CALIFORNIA (USA)
The UDM acetabular system consists of a Cobalt Chrome (CoCr) acetabular cup and a mobile polyethylene liner that rotates within the cup and captures the femoral head. The inner surface of the cup is polished to allow optimal articulation between the cup and mobile liner. UDM dual mobility cups are available with several different fixation ...
Manufactured by:GPC Medical Ltd. based inNew Delhi, INDIA
Indications: Old and frail patients as the prosthesis loosen with time & erode the acetabulum. Intracapsular femoral neck fractures. Osteonecrosis of femoral head. Fractures secondary to malignancy. Fractures associated with Pagets disease with minimal acetabular damage. Patient with rheumatoid disease with minimal arthritis of ...
Manufactured by:Onkos Surgical based inParsippany, NEW JERSEY (USA)
The ELEOS proximal femoral system consists of a femoral component, optional midsection, and stem. The femoral component is compatible with various femoral heads and bipolar options. ...
Manufactured by:MedSpark, LLC based inSan Luis Obispo, CALIFORNIA (USA)
Such joint replacement orthopedic surgery is generally conducted to relieve arthritis pain or fix severe physical joint damage such as a hip fracture. During this procedure, the femoral head is typically resected and the proximal femoral canal is broached and/or milled to accept the femoral component with attached prosthetic ...
Manufactured by:MedSpark, LLC based inSan Luis Obispo, CALIFORNIA (USA)
Such joint replacement orthopedic surgery is generally conducted to relieve arthritis pain or fix severe physical joint damage such as a hip fracture. During this procedure, the femoral head is typically resected and the proximal femoral canal is broached and/or milled to accept the femoral component with attached prosthetic ...
Manufactured by:Smith & Nephew plc based in, UNITED KINGDOM
The BIRMINGHAM HIP◊ Resurfacing (BHR◊) System is a conservative approach to hip arthroplasty in which an all-metal bearing couple is used to preserve, rather than replace, a patient’s femoral head and neck. It was first implanted in July 1997, and was approved for use in the United States by the Food and Drug Administration in 2006. Since its ...
Manufactured by:MedSpark, LLC based inSan Luis Obispo, CALIFORNIA (USA)
Once the proper shell size has been selected, the insert component is placed into the implanted shell component in preparation to receive the femoral head component previously attached to the femoral stem located in the patient's femur. ...
Manufactured by:Ortho Development Corporation based inDraper, UTAH (USA)
The Legend Acetabular Shell is Ortho Development’s newest acetabular solution featuring a comprehensive range of sizes and options. The 3D porous coating structure, with pore sizes between 200-300μm, promotes initial stability and long-term ...
Manufactured by:Shukla Medical based inSt. Petersburg, FLORIDA (USA)
The SHUKLA Lag Screw is auniversally compatible extraction systemfor femoral lag screws. It contains a universal set of drivers that engage with exterior lag screw geometry. Interchangeable inner shafts engage with any thread dimension. Driver and shaft assemblies connect efficiently using a quick-connect T-Handle. This system is intended for use in conjunction with our other intramedullary nail ...
Manufactured by:United Orthopedic Corporation (UOC) USA Inc. based inIrvine, CALIFORNIA (USA)
U-Motion II PLUS utilizes a Titanium Plasma Spray PLUS (TPS PLUS) coating technology for increased roughness. Titanium Plasma Spray PLUS coating technology designed to provide outstanding bonding strength and ‘scratch fit’ for initial stability. ...
Manufactured by:Ortho Development Corporation based inDraper, UTAH (USA)
The Escalade Acetabular Shell was designed to maximize range of motion capabilites. The enhanced instrument offering accommodates less invasive surgical ...