- Home
- Equipment
- north america
- mandibular
Show results for
Refine by
Mandibular Equipment Supplied In North America
28 equipment items found
Manufactured by:Glidewell based inNewport Beach, CALIFORNIA (USA)
Helping patients who suffer from sleep-disordered breathing, the TAP 3 TL is part of the TAP family of appliances for the treatment of snoring and obstructive sleep apnea (OSA). Based on the same principle as cardiopulmonary resuscitation (CPR), the TAP (Thornton Adjustable Positioner) was designed to keep the airway open to allow for air to pass. A constricted or collapsed airway causes snoring ...
Manufactured by:Omega Surgical Instruments based inFLINT, MICHIGAN (USA)
The Omega OOS-6132 Surgical Mandibular Osteotomy Blade is 7.3 MM long by 11.8 MM and has a cut thickness of 0.51 MM for use in orthopedic surgery. Our OOS-6132 is designed to replace the Stryker 2296-31-32 Small Bone Orthopedic Mandibular Osteotomy Blade. Manufactured out of high quality Stainless Steel the OOS-6132 features exceptionally sharp teeth. ...
Manufactured by:Omega Surgical Instruments based inFLINT, MICHIGAN (USA)
The Omega OOS-6134 Surgical Mandibular Osteotomy Blade is 12.4 MM long by 11.8 MM and has a cut thickness of 0.51 MM for use in orthopedic surgery. Our OOS-6134 is designed to replace the Stryker 2296-31-34 Small Bone Orthopedic Mandibular Osteotomy Blade. Manufactured out of high quality Stainless Steel the OOS-6134 features exceptionally sharp teeth. ...
Manufactured by:Apnea Sciences Corporation based inAliso Viejo, CALIFORNIA (USA)
SnoreRx’s proprietary Thermal Matrix? material helps you create the perfect fit. The result? A lightweight anti-snoring device that stays put and lets you sleep in ...
Manufactured by:Matrix Surgical USA based inNewnan, GEORGIA (US) (USA)
Design Y Mandible Onlays benefit patients who have skeleton mandibular deficiencies or surgically altered anatomy. Implant design provides the opportunity for augmentation of ramus height and ramus width. It also provides the opportunity to alter the inclination of the mandibular plane and restore continuity of the mandibular border. ...
Manufactured by:Echelon Biosciences, Inc (EBI) based inSalt Lake City, UTAH (USA)
Exposure of female Daphnids to increasing levels of MF increases the percentage of males in a brood in a dose-dependant manner. MF is endogenously produced in the mandibular organ and environmental factors such as salinity and temperature can influence hemolyph levels. ...
Manufactured by:Denovo Dental, INC based inBaldwin Park, CALIFORNIA (USA)
The Deluxe Introductory Chairside Space Maintainer Band Kit comes with 1 of each size Maxillary and Mandibular Bands (total of 78) and 78 Wires (6 distal shoes, 34 w/o rests, 6 w/ rests, 32 drop wires). Also Included are the Tube Crimping Plier, Posterior Band Remover, Professional Bite Stick and Demonstration Model. Bands and wires are packaged in two interlockable kit boxes ...
Manufactured by:Denovo Dental, INC based inBaldwin Park, CALIFORNIA (USA)
The Introductory Chairside Space Maintainer Band Kit comes with 1 of each size Maxillary and Mandibular Bands (total of 78) and 78 Wires (6 distal shoes, 34 w/o rests, 6 w/ rests, 32 drop wires). Also included are the Tube Crimping Plier and Demonstration Model. Bands and wires are packaged in two interlockable kit boxes with drawers and inserts for easy access and ...
Manufactured by:Denovo Dental, INC based inBaldwin Park, CALIFORNIA (USA)
The Professional Chairside Space Maintainer Band Kit comes with 2 of each size Maxillary and Mandibular Bands (total of 156) and 156 Wires (12 distal shoes, 68 w/o rests, 12 w/ rests, 64 drop wires). Also included are the Tube Crimping Plier and Demonstration Model. Bands and wires are packaged in two interlockable kit boxes with drawers and inserts for easy access and ...
Manufactured by:Atos Medical, part of Coloplast A/S based inMalmö, GERMANY
For restoring jaw mobility after trismus and mandibular hypomobility. The TheraBite Jaw Motion Rehabilitation System and TheraBite ActiveBand are clinically proven to be effective in treating trismus and in improving muscle strength and endurance of the muscles of mastication, respectively. ...
Manufactured by:Acumed LLC based inHillsboro, OREGON (USA)
They are optional modules of the CFx system and can be customizable as part of the ICON system. The system includes plates, screws, and instrumentation used for standard orthognathic maxillary and mandibular advancements. The system features zygomatic, pyriform, and BSSO plates, and instruments include drill bits, plate bending forceps, plate holding forceps, plate cutters, ...
Manufactured by:TAP based inFarmers Branch, TEXAS (USA)
TAP 3’s simple design is made up of mandibular and maxillary components that are joined with a fixed mechanical hinge and inseparable pivot point during sleep. Fitting comfortably, the TAP 3 is designed to provide room for the tongue and allow the lips to close. The TAP 3 is titratable with a single point of central adjustment, which prevents uneven bilateral ...
Manufactured by:Matrix Surgical USA based inNewnan, GEORGIA (US) (USA)
Design Y Chin implants come as a three-part assembly – right and left halves joined by a connecting tab – which allows for easier insertion. Two styles (round and square) are offered in a range of sizes to address patient needs. The Design Y Chin implants are uniquely designed with registration tabs which act as a flange to allow the implant to “hug” the inferior border of ...
Manufactured by:CAD-Ray based inLas Vegas, NEVADA (USA)
The UI-3280CP with Sony’s 5MP sensor sets a new standard in terms of light sensitivity, dynamic range and colour reproduction. The USB 3.0 industrial camera provides excellent image quality with extraordinarily low-noise performance – at frame rates up to 36 ...
Manufactured by:Matrix Surgical USA based inNewnan, GEORGIA (US) (USA)
The Osteotomy Gap Implant is designed to correct the inferior border contour irregularities of the mandible which inevitably occur after sagittal split osteotomy or sliding genioplasty. Each sterile package contains two ...
Manufactured by:Belmont Equipment based inMississauga, ONTARIO (CANADA)
Offering a wide range of flexibility that aligns with your needs. Upright chair positions patients in an ideal posture with their feet on the floor for accurate assessment of jaw relationship, obtaining accurate occlusal records, JVA, TENS and Jaw tracking. With the patient at this position, the mandible assumes a natural position for diagnostic evaluation and the precise fabrication of ...
Manufactured by:Air Techniques, Inc based inMelville, NEW YORK (USA)
The ProVecta S-Pan from Air Techniques sets a new standard in sharpness of extraoral imaging. This 2D panoramic system offers ease of handling and optimal workflow, supported by an innovative 7” touch display. The ProVecta S-Pan owes its excellent imaging performance to two innovative technologies. First, the modern CsI sensor technology which enables better image quality and, hence, ...
Manufactured by:SMK Imaging Works Corporation based inElmsford, NEW YORK (USA)
For dental professionals that need both 3D volumes AND 2D panoramic x-rays to be high resolution. Most dental cone beam systems use the same sensor for 2D panoramic x-rays as they use for the 3D scans. This means that one (or both) modality is typically suboptimal. ...
Manufactured by:Medicon eG based inTuttlingen, GERMANY
For lower jaw reconstruction with a microvascular graft (e.g. fibular graft). The lower jaw plays an important role in chewing, breathing, speech and the harmony of the facial shape. For the best results in reconstruction of the mandible contour, it is necessary to precisely determine the angles and osteotomies, as well as the degree of the bending of the plates. ...
Manufactured by:SMK Imaging Works Corporation based inElmsford, NEW YORK (USA)
The Panoura 18S and its Direct Conversion Sensor: for Dental Professionals who want to maximize the information from their panoramic x-rays, and DESPISE ...