- Home
- north america
- Equipment
Refine by
Rti Medical Equipment Supplied In North America
32 equipment items found
Manufactured by:RTI Surgical based inAlachua, FLORIDA (USA)
Non-bone tendons are sterilized through the BioCleanse Tissue Sterilization Process without the use of irradiation. Non-bone tendons used in ACL reconstruction procedures allow for multiple fixation ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
Aluminum HVL filter kits for traditional HVL measurement on R/F, CT, Dental, and Mammography. 99.5% high pure ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
Designed to comply with the needs of QA in modern X-ray departments. The RTI Light Probe measures the brightness on monitors with the same spectral response as the human eye. With a monitor and a lux adapter, the RTI Light Probe measures the brightness on monitors and film viewing boxes and the ambient light in the room. It has the same spectral response as the human eye! This makes it reliable ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
RTI provides a range of adapter cables. These enable you to connect many different types of ionization ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The GE Vascular Holder is designed for accurate positioning of the Piranha and Barracuda Dose Probes on the GE Vascular ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
For vertical and/or horizontal exposures with Dose Probe. The RTI Dose Probe Flexi Stand will normally be placed on the patient’s table. It is developed for use with RTI Dose Probe, for vertical and/or horizontal exposures. ...
Manufactured by:RTI Surgical based inAlachua, FLORIDA (USA)
Whole bones are used as a sterile source of cortical and cancellous bone. These implants may also be used in procedures that restore segmental and critical bone loss in the extremities due to trauma, bone disease, or from the removal of tumors and/or hardware. After being processed through RTI's BioCleanse® Tissue Sterilization Process, they are terminally sterilized in their final packaging ...
Manufactured by:RTI Surgical based inAlachua, FLORIDA (USA)
Conventional allografts are used for various procedures to fill bony voids or gaps in a patient's skeletal system, restore segmental bone loss due to trauma, osteoporosis, removal of tumors or to aid in the surgical correction for a deformity. These grafts provide a scaffold for bone ingrowth to allow for remodeling with the patient’s own bone. These grafts are pre-cut to select sizes to ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The RTI Dose Probe Scatter Holder is a stand to fixate RTI Dose Probe in defined positions for scatter measurements on DEXA ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The RTI MAS-2 probe is a clamp-on probe for the non-invasive measurement of mA (tube current) and mAs. Safe and easy to use. The probe is simply clamped onto the high voltage cable and then ready for measurements. No connection inside the X-ray generator is needed! Together with your meter, direct readings of mA and mAs, as well as waveform, are obtained. ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
RTI CT Dose Profiler probe for use with our Piranha, Mako, Cobia FLEX, or Cobia SENSE (with PC com). Used for the evaluation of CT and CBCT systems. The probe fits into standard phantoms used for CTDI ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The RTI Dose Probe is an external dose probe designed to perform very low dose rate measurements, for instance, on image ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The RTI CT Ion (Ionization) Chamber is for use with the Piranha, Mako, Cobia FLEX R/F, and Cobia SENSE meters. The RTI CT Ion Chambers – 10 cm and 30 cm – are intended for CTDI and dose length product measurements on CT scanners in a phantom or ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The General mA Test Point Cable is made for special mA accuracy tests for AMX-4, Optima, Jedi, and Fluoroscan machines. No need to use an oscilloscope for setting up, configuring, triggering properly, calculating proper values, etc. Connect the leads to test points and use them with a Piranha meter and our world-leading Ocean Next™ software for X-ray QA and ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
RTI offers an HVL Filter Holder for 33 x 33 mm or 100 x 100 mm filter ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The RTI Scatter Probe is our revolutionary solid-state detector for leakage and scatter detection in X-ray environments. Its unique design – two separate detector areas of 10 cm² and 100 cm² – fulfills current regulations and standards for X-ray leakage and scatter measurements (complies with the relevant 21 CFR and IEC 60601 standards). The Scatter Probe connects to our ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The RTI MAS-1 is an invasive probe for the measurement of mA and mAs. Together with Piranha or the Cobia SENSE, direct reading of mA and mAs, as well as waveform, are obtained. The probe connects to the mAs socket in the X-ray generator and to the multimeter. It can be used to measure tube current for both radiographic and fluoroscopic exposures. ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The DAP Chamber is the perfect tool for field calibration of orthodontic X-ray equipment. You can measure with just one click – fast, easy, and accurate, ensuring your X-ray quality control process runs safely and ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The RTI T20 Dose Probe is a solid-state detector dedicated to measurements on Rad/Fluoro systems when it is crucial that the detector itself does not have any effect on the system output or disturb the X-ray beam. It was developed for measurements of the patient entrance dose (skin dose) and the maximum dose rate in the radiographic and fluoroscopic field. Despite its small size, the RTI T20 Dose ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
RTI CTDI Phantom Sets simulates adult and pediatric head and body of patients for QA testing of computed tomography (CT) systems. RTI offers two different CTDI Phantom sets. Choose two (2) or three (3) parts. Both have nested modules to allow adaptation to the size required by the selected user protocol. ...