Refine by
Cannulated Bone Screws Equipment & Supplies
51 equipment items found
Manufactured by:Gramercy Extremity Orthopedics, LLC based inRichardson, TEXAS (USA)
Cannulated bone screws for reconstruction and fracture ...
Manufactured by:Paragon 28, Inc. based inEnglewood, COLORADO (USA)
The Mini-Monster® Screw System is a cannulated screw system containing headed and headless 2.0 mm, 2.5 mm, 3.0 mm, 3.5 mm and 4.0 mm screws. Every detail was scrutinized that went into the design of these screws–emerging with a screw that comes with a “Monster” bite and a noteworthy amount of options. We set the goal of being inclusive and respectful of individual ...
Manufactured by:Nanova Biomaterials, Inc. based inColumbia, MISSOURI (USA)
The basic tray includes the essential tools needed for seamless ACL or PCL repair. High-quality stainless-steel instruments offer reliable performance with the FiberFix™ Interference Screws. The cannulated 6-star driver system enhances the FiberFix™ line of interference screws with the universal driver approach meaning one driver fitting all screws, with high torsional and insertion ...
Manufactured by:Medartis AG based inBasel, SWITZERLAND
Plate has a combination of 2.8 and 3.5 mm screws. 20° posterior-anterior oblong hole and round hole with recess for syndesmotic screw fixation. Eight 2.8 Trilock screws in the thinner distal section. 2.8 mm flap for fixation of Wagstaffe fragment. ...
Manufactured by:Clariance SAS based inBeaurains, FRANCE
DESIGNED TO INSPIRE CONFIDENCE: Dual-lead screws, snap-on set screws and friction fit screwheads increase speed while enhancing control throughout the procedure. MULTIPLE SCREW OPTIONS: Polyaxial screws, reduction screws and cannulated screws are available to accommodate any surgeon’s preference. CONTROLLED ROD REDUCTION: Gradual rod reduction is achieved with the Persuader which easily ...
Manufactured by:Enovis based inLewisville, TEXAS (USA)
The 4.5mm Tiger Cannulated Screws are dual lead, self-drilling, self-tapping, titanium alloy lag screws with the look, strength, and bite of a “Tiger”. ...
Manufactured by:Biedermann Motech GmbH & Co. KG based inVillingen, GERMANY
40° Polyaxial locking. Strong & consistent locking at every angle. Low profile construct. Compression before locking. ...
by:In2Bones Global based inMemphis, TENNESSEE (USA)
Jones Fracture Headed Compression Screws are Designed to Treat Jones Fractures. This screw design unites the rotational stability of a headless screw with the compression levels of a conventional-headed lag screw. ...
Manufactured by:BioPro, Inc based inPort Huron, MICHIGAN (USA)
The HBS Headless Cannulated Compression Screw System features screws 2.5mm and 3.0mm screws with various cutting tip styles available. The 2.5/3.5 and 3.0/3.9mm self-tapping (ST) only screws feature self-tapping tips that maximize thread length for use in small bones. The 2.5/3.5mm and 3.0/3.5mm ...
Manufactured by:Enovis based inLewisville, TEXAS (USA)
The Tiger Cannulated Screw is a self-drilling, self-tapping, titanium alloy lag screw with the look, strength, and bite of a “Tiger”. ...
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
Merete’s Chronoceptor™ reduces screw implantation time and eliminates back table hand-offs by combining k-wire, pilot drill, countersink and length gauge into a single sterile instrument. Designed for use with Mecron™, the original cannulated screw system. Chronoceptor™ streamlines your OR by simplifying common AO techniques and eliminating many of the instrument hand-offs ...
Manufactured by:BioPro, Inc based inPort Huron, MICHIGAN (USA)
Manufactured by:Enovis based inLewisville, TEXAS (USA)
The Gridlock Ankle Plating System consists of titanium plates, screws, and instrumentation for applications in the bones of the ankle including trauma and corrective surgical procedures. ...
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
The self-drilling and self-tapping Merete® Cannulated PCS Screws are made of titanium alloy (Ti6AI4V, DIN EN ISO ...
Manufactured by:Precision Edge Surgical Products based inSault Sainte Marie, MICHIGAN (USA)
Go ahead. Challenge us with an incredibly demanding thread form. Not only can we produce solid and cannulated implantable screws and bone taps in diameters ranging from 1-6 mm in lengths up to 16 inches, but we use product-simulation software to show you pre-production review of thread forms. It’s all part of the process that requires us ...
Manufactured by:Enovis based inLewisville, TEXAS (USA)
The Tiger Headless Cannulated Screw is a self-drilling, self-tapping, titanium alloy lag screw with the look, strength, and bite of a “Tiger”. ...
Manufactured by:The Orthopaedic Implant Company (OIC) based inReno, NEVADA (USA)
According to CDC data, hip fractures are the most serious and costly fall-related type of fracture. The OIC Hip Nail System is a smart solution for the new world of healthcare, demanding clinical excellence at a bottom line that keeps our heads above water. As the core of OIC’s hip fracture solution portfolio, the Hip Nail System boasts unparalleled value and uncompromising quality in ...
Manufactured by:Medartis AG based inBasel, SWITZERLAND
Sharp screws to cover numerous areas of use across upper and lower limb due to patented SpeedTip polygonal geometry, precise and sharp thread, optimized cutting geometry. Self-holding porperties beween screw and screwdriver due to patented ...
Manufactured by:OrthoPediatrics Corp. based inWarsaw, INDIANA (USA)
OrthoPediatrics is pleased to launch the next generation Cannulated Screw System! The new system is available in multiple screw diameters including: 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm and 5.5mm. For each configuration, all screws and instruments are housed in one case/tray – giving the added convenience of an “all-in-one” set. The upgraded instrumentation, and color-coding aid in ...
Manufactured by:Elos Medtech AB based inGöteborg, SWEDEN
Advanced manufacturer of medical screws: We are an advanced manufacturer of medical screws for both orthopedic and dental applications. In close cooperation with customers, we develop and manufacture several cutting-edge products. By applying our precision techniques and development expertise to this demanding product line, we can help make orthopedic screws part of your competitive ...