Refine by
Thoracolumbar Spine Equipment & Supplies
19 equipment items found
Manufactured by:Medical Brace based inAthens, GREECE
Thoracolumbar spine support brace with a lacing compression system. High quality durable non-elastic fabric for better Thoracic and Low back compression, Rear lacing system with two plastic panels for compression adjustment, Front Velcro closure, Removable front panel and two side ones for extra compression, Universal fit for men and women, ...
Manufactured by:Curiteva, Inc. based inTanner, ALABAMA (USA)
The Prodigy MIS Pedicle Screw System is designed to minimize the complexity of procedural steps while correcting and stabilizing the posterior thoracolumbar spine through a percutaneous approach. This system provides the same strength and rigidity as the Prodigy Polyaxial Screw System. ...
Manufactured by:Spine Wave, Inc. based inShelton, CONNECTICUT (USA)
Next gen minimally invasive pedicle screw system designed to treat degeneration, deformity, tumor, or trauma of the thoracolumbar ...
Manufactured by:Curiteva, Inc. based inTanner, ALABAMA (USA)
The Prodigy MIS Pedicle Screw System is designed to minimize the complexity of procedural steps while correcting and stabilizing the posterior thoracolumbar spine through a percutaneous approach. This system provides the same strength and rigidity as the Prodigy Polyaxial Screw ...
Manufactured by:Evolution Spine based inDallas, TEXAS (USA)
A traditional Pedicle screw system intended to provide immobilization and stabilization of spinal segments in the thoracolumbar spine. Stowe features three tulips (Low, Reduction, MIS). This system allows for manipulation and deformity correction. ...
Manufactured by:Bonovo Orthopedics, Inc. based inHaidian District, CHINA
O-FUSE is used for interbody support and fusion in lumbar spine surgery. Designed for posterior thoracolumbar spine treatment, PEEK intervertebral fillers are available in various sizes of lordosis. ...
Manufactured by:Bonovo Orthopedics, Inc. based inHaidian District, CHINA
P-FUSE is used for interbody support and fusion in lumbar spine surgery. Designed for posterior thoracolumbar spine treatment, PEEK intervertebral fillers are available in various sizes of ...
Manufactured by:Precision Spine, Inc. based inParsippany, NEW JERSEY (USA)
The AccuFit® Lateral Plate System is indicated for use via a lateral or anterolateral surgical approach above the bifurcation of the great vessels in the treatment of thoracic and thoracolumbar (T1-L 5) spine instability. The AccuFit® Lateral Plate System consists of non-sterile, single use, titanium alloy (Ti-6AI-4V ELI per ASTM F136) rigid plates and ...
Manufactured by:MJ Surgical based inAhmedabad, INDIA
Low Profile head with Dual thread shaft screw design. Dual Thread designed to securely insert the screw in cortical and cancellous ...
Manufactured by:Aditus Medical GmbH based inBerlin, GERMANY
Ti-6Al-4V ELI (ISO 5832-3) Titanium Alloy Material; Low Profile Design; Special Titanium Sandblasting and Porous Coating Roughening; Integrated Buffer Allowing Flexion and Extension; Improved Low Profile Poliaxial Screw Design; Increased Operative Efficiency; Different Dimension Options for Symmetrical Positioning at all Levels; Design Suitable for Anatomical Structure; Easy and Safe ...
Manufactured by:Aditus Medical GmbH based inBerlin, GERMANY
Ti-6Al-4V ELI (ISO 5832-3) Titanium Alloy raw material; High Elasticity According to Capability of Thoraco-lumbar spine; Low Profile Design; Offers Different Rod Dimensions and Rod Lengths; Different Options for One Level Elasticity or 2 Level ...
Manufactured by:Aditus Medical GmbH based inBerlin, GERMANY
Ti-6AI-4V ELI (ISO 5832-3) Titanium Alloy Material; Anodized Coloring for Different Product Dimensions; Two Times Stronger Adhesion thanks to Special Conical Thread Structure; Non-guided Use with Self-Tapping Feature; Easy and Safe Instrumentation; Body Profile Compatible with Rod Diameters of 5,5mm and 6mm; Low,Medium and High Profile Options; Cannulated Poliaxial and Monoaxial Screw Options; ...
Manufactured by:Aspen Medical Products based inIrvine, CALIFORNIA (USA)
The Horizon™ 456 TLSO is designed to provide motion restriction, creating a dynamic environment for healing within the thoracolumbar and lumbar spine. Comfortable to wear and easy to don and doff, the Horizon 456 TLSO was designed specifically to target patients with challenging indications such as compression fractures, burst fractures and hyper-kyphosis. ...
Manufactured by:Life Spine, Inc. based inHuntley, ILLINOIS (USA)
The ARx Spinal Fixation System is the next generation of posterior fixation technology. ARx is a highly adaptable system designed to support both degenerative and complex spinal pathologies with a wide variety of implants, including modular and pre-assembled tulips. Utilizing Centerline Modular’s proven design, this system provides superior pull-out strength while maintaining a slim tulip ...
Manufactured by:BPB MEDICA based inMirandola (MO), ITALY
A hernia is a common disorder that occurs when the intervertebral discs nucleus pulposus becomes dislodged from its natural position inside the annulus fibrosus. Most annulus fibrosus lesions are the result of repeated microtraumas or a major trauma that degenerates to allow the nucleus pulposus to bulge and compress the spinal cord or a nerve, causing pain in the back and the legs. When ...
Manufactured by:Bonovo Orthopedics, Inc. based inHaidian District, CHINA
The Pioneer BacFuse Spinous Process Plate System is part of the Quantum®MIS Spinal Fixation System and consists of locking screws, spinous process plates, surgical tools and a sterilization box. The implants in this system are made of titanium alloy material as described in the ASTMF136 quality standard. The basic requirement is to use the Pioneer BacFuse system implant through its specially ...
Manufactured by:AF Medical GmbH based inSpaichingen, GERMANY
We provide a comprehensive range of spine products. Highest quality spine implants consisting of instruments and implants for the most common applications in cervical, lumbar and thoracic fusion surgery. ...
Manufactured by:Mesoblast Ltd. based inMelbourne, AUSTRALIA
MPC-25-Osteo for spinal fusion is a proprietary Phase 3-ready product candidate. All doses of MPC-25-Osteo for the treatment of spinal fusion consist of 25 million MPCs delivered on a collagen ceramic carrier material into the disc space with stabilizing ...
Manufactured by:Orthofix Medical Inc. based inLewisville, TEXAS (USA)
The CONSTRUX Mini PEEK Spacer System is comprised of a variety of implants manufactured from PEEK in two footprint sizes, small and large, and in various heights, in one-millimeter increments. The superior and inferior surfaces of the implant have a pattern of ripples to provide increased stability and help prevent anterior/posterior movement of the ...