Refine by
Total Hip Arthroplasty Equipment & Supplies
23 equipment items found
Manufactured by:Innomed, Inc. based inSavannah, GEORGIA (US) (USA)
Instrument system specifically designed for Direct Anterior approach Total Hip Arthroplasty. Lighted retractors can be attached to a fiber optic light cable with ACMI (female) ...
Manufactured by:Biotechni based inLa Ciotat, FRANCE
Femoral stem for Total hip arthroplasty and hemiarthroplasty. Version Titanium Press-fit stem with Porous Ti+HA coating in metaphysis and HA only in diaphysis, Version Stainless Steel to be Cemented, mirror-polished finish. 10 sizes (from 130 to 190mm lengths). 135° CCD angle for coated stems with or without collar, and cemented. 130° CCD ...
Manufactured by:Intellijoint Surgical Inc. based inKitchener, ONTARIO (CANADA)
Intellijoint HIP is a surgeon-controlled, navigation tool for total hip arthroplasty (THA). It provides real-time, intraoperative measurements for fast, easy and accurate implant alignment for cup position, leg length and offset. ...
Manufactured by:Zimmer Biomet based inWarsaw, INDIANA (USA)
The collarless, polished, double-taper design concept used in the CPT Hip System has proven itself clinically in more than 25 years of use.¹ This distinctive design philosophy is based on the use of natural compressive forces to help ensure that the implant is firmly seated and wedged within the cement mantle. The CPT System, in cobalt-chromium² and stainless steel,3,4 has achieved ...
Manufactured by:Innomed, Inc. based inSavannah, GEORGIA (US) (USA)
A self-retaining frame and retractor system designed for use during anterior total hip arthroplasty, the blades help retract the hip capsule and musculature, permitting an unobstructed view of the acetabulum while freeing an ...
Manufactured by:3D Medical based inMarolles-en-Brie, FRANCE
Acetabular bone loss is a challenging problem in revision total hip arthroplasty. Customs strategy allows to fit the implant to the residual host bone, bypassing the bony deficiency and restoring hip ...
Manufactured by:GO German Orthopedic Implants GmbH based inHamburg, GERMANY
All the cemented Acetabular Cups can be implanted via any standard approach for total hip arthroplasty, depending on the surgeon's level of ...
Manufactured by:Euromed Implants GmbH based inStade, GERMANY
The Zweymüller stem is the original tapered stem with a rectangular cross section and has been implanted since 1979. Since its introduction, the Zweymüller has established high standards for total hip arthroplasty with his design features, the excellent clinical results, and a technically simple surgical ...
Manufactured by:GO German Orthopedic Implants GmbH based inHamburg, GERMANY
for total hip arthroplasty are small ceramic balls that are placed onto the hip stem. Due to the conical design of the 12/14 taper, the heads sit firmly on the stem and require no additional fixation. EasyHip Ceramic Heads come in three diameters (28 mm, 32 mm and 36 mm) and four head neck lengths, ranging from -4 mm to +8 mm. ...
Manufactured by:MedSpark, LLC based inSan Luis Obispo, CALIFORNIA (USA)
Total Hip Arthroplasty (replacement) or THA surgery requires a wide range of specialized instruments for surgeons to successfully complete the surgical procedure. During a typical THA procedure, the acetabulum (hip socket) is resurfaced in preparation to receive the outer shell (typically titanium) of the acetabular component of ...
Manufactured by:Groupe Lepine based inGENAY, FRANCE
The titanium alloy TARGOS™ Mini self-locking femoral stem with collar is intended for cementless implants. It controls the sinking and preserves the spongy hip bone structure. This shortened stem provides a solution adapted to the indications of total hip arthroplasty in young active patients and is perfectly suited for a ...
Manufactured by:MedSpark, LLC based inSan Luis Obispo, CALIFORNIA (USA)
Total Hip Arthroplasty (replacement) or THA is a surgical procedure in which the hip joint is replaced with a prosthetic implant. Such joint replacement orthopedic surgery is generally conducted to relieve arthritis pain or fix severe physical joint damage such as a hip fracture. ...
Manufactured by:MedSpark, LLC based inSan Luis Obispo, CALIFORNIA (USA)
Total Hip Arthroplasty (replacement) or THA is a surgical procedure in which the hip joint is replaced by a prosthetic implant. Such joint replacement orthopedic surgery is generally conducted to relieve arthritis pain or fix severe physical joint damage such as a hip fracture. ...
Manufactured by:MedSpark, LLC based inSan Luis Obispo, CALIFORNIA (USA)
Total Hip Arthroplasty (replacement) or THA is a surgical procedure in which the hip joint is replaced by a prosthetic implant. Such joint replacement orthopedic surgery is generally conducted to relieve arthritis pain or fix severe physical joint damage such as a hip fracture. During a typical THA procedure, the ...
Manufactured by:Medical Brace based inAthens, GREECE
Adjustable lumbar-thigh Hip brace abductive with immobilization UNI-HIP ...
Manufactured by:Smith & Nephew plc based in, UNITED KINGDOM
The BIRMINGHAM HIP◊ Resurfacing (BHR◊) System is a conservative approach to hip arthroplasty in which an all-metal bearing couple is used to preserve, rather than replace, a patient’s femoral head and neck. It was first implanted in July 1997, and was approved for use in the United States by the Food and Drug Administration in 2006. Since its introduction, there have been over ...
Manufactured by:Acheron Instruments Pvt. Ltd. based inLahore, PAKISTAN
Acheron Instruments’ Acetabular Retractor is a surgical tool that features bent or curved blades to facilitate the acetabulum, a cup-shaped socket in the pelvis, with controlled action. ...
Manufactured by:Microport Orthopedics Inc. based inArlington, TENNESSEE (USA)
The Profemur® line of primary hip stems has an established clinical history. Each Profemur® hip stem offers its own philosophy to provide fixation and replace bone anatomy. Triple taper stem philosophy" Designed for primary hip replacement surgery, the Profemur® Gladiator® hip stem is a triple tapered wedge stem with a distinct geometry. The hip stem is designed with a reduced ...
Manufactured by:Bone Foam, Inc. based inCorcoran, CALIFORNIA (USA)
The Tray Topper is a new device that is transforming the use and functionality of the Mayo stand. The Tray Topper is a soft and stable top cushion for the Mayo stand that is utilized by surgeons across specialties to fulfill their positioning needs. No need to pad the Mayo stand with a combination of blankets and linens; Tray Topper is a radiolucent cushion that can be used as an operating ...
Manufactured by:Zimmer Biomet based inWarsaw, INDIANA (USA)
The fully porous, distal fixation philosophy of the Arcos One-piece Femoral Revision System offers three cylindrical, forged titanium stem options with a unique size range to address a wide range of femora, including patients of small ...