Aerator Articles & Analysis
4 articles found
Unlike conventional treatment methods that promote aerosol formation in open environments—such as jet and surface aerators placed directly within treatment basins—the SDOX® super-saturates the water with oxygen in a closed, pressurized vessel at the molecular level in the side-stream before returning it to the bulk flow, preventing the production of bubbles or ...
Location of the plant Duzce/TURKEY Scope of work Domestic Wastewater Package Treatment Plant Contract Date 2002 Completion date 2003 Flowrate of the plant: 75 m3/day Inlet Pollution Parameters: BOD: 75 mg/ L COD: 300-400 mg/ L SS: 200 mg/ L Outlet Discharge Values: BOD: 45 mg/ L COD: 120 mg/ L AKM: 45 mg/ L SS: 6-9 Units of the Plant: Physical Treatment Unit Static Screen ...
The XSTO decreased from 142 mg L−1 to 54.6 mg L−1 during the aeration period. The EPS had a significant increase, with the highest value of 618.1 mg L−1, which then decreased to 245.6 mg L−1 at 240 min. ...
The thermoplastic melt is quantiatively injected into the mould cavity which is very similar with traditional injection molding.But usually the gas-assisted injection volume takes up only 55%~80% of the mold cavity volume.Sure the specific injection volume varies with different molding productsto ensure that the surface of thermoplastic melt will not be blown through upon the injection of ...