Show results for
Refine by
Compression Assist Device Equipment & Supplies In Iran
47 equipment items found
Manufactured by:Chuzhou Kexin Machinery Technology Co., Ltd based inChuzhou, CHINA
The fold angle around the bottom of the tank is 90 degrees, the unilateral length of a right angle side is about 3mm, the specific dimensions shall be carried out according to the dimensions of the product drawings(The buyer shall provide the product drawings). Device compression length is 600 mm, the work schedule is adjustable from 10 to 20 mm. ...
Manufactured by:MedNet GmbH based inMünster, GERMANY
Radial Compression Device Configuration: 22cm (8.7"), with Scale ...
Manufactured by:MedNet GmbH based inMünster, GERMANY
Radial Compression Device Configuration: 26cm (10.3"), with Scale ...
by:BioTAB Healthcare based inSaint Louis, MISSOURI (USA)
Our Basic Pneumatic Compression Device (PCD) is clinically proven to effectively treat lymphatic and venous disorders. The LV BASE and garments are designed for ease of use while offering controlled pressure options to meet patients’ individual needs. ...
Manufactured by:MedNet GmbH based inMünster, GERMANY
Radial Compression Device Configuration: 18cm (7.1"), with Scale ...
by:BioTAB Healthcare based inSaint Louis, MISSOURI (USA)
Our Advanced Pneumatic Compression Device (APCD) is clinically proven to be the most effective in-home device to treat lymphatic and venous disorders. The LV PRO and garments offer complete programmability with the fastest delivery cycle time and targeted treatment options tailored to meet patients’ individual needs. ...
Manufactured by:Capsur Enterprises based inDELHI, INDIA
728.001 - Double Drill Sleeve 1.5/1.1mm; 728.002 - Double Drill Sleeve 2.0/1.5mm; 728.003 - Double Drill Sleeve 2.5/1.8mm; 728.004 - Double Drill Sleeve ...
Manufactured by:Capsur Enterprises based inDELHI, INDIA
731.001 - Mini Depth Gauge for 1.5mm & 2.0mm Screw; 731.002 - Depth Gauge for 2.5mm & 2.7mm ...
Manufactured by:AIROS Medical Inc based inAudubon, PENNSYLVANIA (USA)
AIROS Medical’s full-leg, half-leg, and full-arm garments are available with 6 chambers (for use with the AIROS 6 Sequential Compression Device), and 8 chambers (for use with the AIROS 8 Sequential Compression ...
Manufactured by:DAESUNG MAREF CO., LTD. based inGunpo-si, Gyeonggi-do, SOUTH KOREA
LX9 is a semi - professional compression system with a compact design and effective therapy programs including four compression modes. The device provides automatic operation with an easy START/STOP button or you can select more tailored programs like time, pressure, chamber to be inflated and ...
Manufactured by:Crossroads Extremity Systems based inMemphis, TENNESSEE (USA)
Offset Legs for Unique Pathologies Available in 5 Sizes, Aligned with All HiMax® Design ...
Manufactured by:Crossroads Extremity Systems based inMemphis, TENNESSEE (USA)
Wide 5mm Bridge for Enhanced Torsional Stability. Low Profile Bridge Thickness of 1.3 – 1.6mm. Aligned with All HixMax® Design ...
Manufactured by:AIROS Medical Inc based inAudubon, PENNSYLVANIA (USA)
AIROS Medical’s 6-chamber and 8-chamber Arm Plus garments treat lymphedema present in the arm, shoulder, and one side of the back, chest, and torso. When used with the AIROS 6 or AIROS 8 Sequential Compression Device, the Arm Plus garments provide targeted compression therapy to assist lymphatic drainage. The garments are ...
Manufactured by:Sam Medical based inTualatin, OREGON (USA)
SAM® Junctional Tourniquet (SJT) is designed to control hemorrhages and bleeding in inguinal or axilla areas. Where standard tourniquets may not be applicable, SJT can be applied in under 25 seconds, controlling bleeding and immobilizing pelvic fractures. ...
Manufactured by:EKOM-AIR GmbH based inAhrensburg, GERMANY
Medical compressor DK50 DS - SMART is the source of modern, clean and quiet compressed air for medical devices. The 1 cylinder aggregate is available with compressor efficiency of 40 l./min., 50 l./min. and 60 l./min. This model has a dew point below ambient temperature by condensation or can be equipped with membrane dryer as option. A display shows the operating pressure, the operating hours ...
Manufactured by:EKOM-AIR GmbH based inAhrensburg, GERMANY
Medical compressor DK50 DE – EASY LOW FLOW is the source of modern, clean and quiet compressed air for medical devices. The 1 cylinder aggregate is available with compressor efficiency of 20 l./min. This model has a dew point below ambient temperature by condensation or can be equipped with membrane dryer as option. The output pressure and operating hours are visible at the outside of the ...
Manufactured by:AIROS Medical Inc based inAudubon, PENNSYLVANIA (USA)
The AIROS 6-Chamber and 8-Chamber Compression Garments are intended for use with the FDA-cleared AIROS 6 and AIROS 8 Sequential Compression Devices. This medical technology provides compression therapy for patients living with lymphedema and venous ...
Manufactured by:Shivam Instruments based inNew Delhi, INDIA
For making tablets upto 100mg and as per size of punch 6mm. Automatic compression and ejection device with each revolution of the wheel drive, built on heavy cast iron body with eccentric pressure system. Stainless steel hoper provided and connected by a PVC tube. Easy setting for thickness and hardness of tablets with nuts and locknuts set of two spanners provided as necessary tools. Die and set ...
Manufactured by:EKOM-AIR GmbH based inAhrensburg, GERMANY
Medical compressor DK50 DE - EASY is the source of modern, clean and quiet compressed air for medical devices. The 1 cylinder aggregate is available with compressor efficiency of 40 l./min., 50 l./min. and 60 l./min. This model has a dew point below ambient temperature by condensation or can be equipped with membrane dryer as option. The output pressure and operating hours are visible at the ...
by:V-Wave Ltd. based inCaesarea Industrial Park (N), ISRAEL
The V-Wave Ventura Interatrial Shunt is a novel, hourglass-shaped implantable device. The shunt is designed to enable shunting of blood across the interatrial ...