Show results for
Refine by
Power Of Knowledge Engineering Equipment & Supplies In St Lucia
20 equipment items found
Manufactured by:Labo Electrofrance based inParis, FRANCE
A versatile and compact range; Start sensor; A powerful engine for a user-friendly sealer; A large adjustable ...
Manufactured by:SprintRay Inc. based inLos Angeles, CALIFORNIA (USA)
The Most Advanced Post-Curing System on the Planet. ProCure 2 is fast. Fast enough to enable true chairside workflows with SprintRay 3D printing. And thanks to its custom light power unit, it delivers heat instantaneously, no warm-up ...
Manufactured by:De Soutter Medical Limited based inAston Clinton, UNITED KINGDOM
Over many years we have listened to our customers and spent significant time improving the most important aspects of our new CleanCast™ system. We’ve added novel features such as a finger switch, located on the handpiece, for easy operation and improved ergonomics. We’ve also reduced noise and vibration using our ‘tapered lock’ in our blade design, a simple principle ...
by:bit.bio based inCambridge, UNITED KINGDOM
opti-ox™ is capable of producing batches of every cell in the human body at scale and gives us the power to precision engineer human cells. This is because it reliably activates specific transcription factors within the cells. Transcription factors tell a cell what to do because they control the programs (gene regulatory networks) of the cell. Together, these form the operating system of ...
Manufactured by:Changchai Co., Ltd based inChangzhou, CHINA
The model applies to Municipal works, highways, ports. mines. Constructions sites and squares, as veil as rescues and relief works. Also available for right operations and other Held operations. With compact conformations, converter movement and easy operating this model is designed to provide lightening for working site immediately ...
Manufactured by:Penumbra, Inc. based inAlameda, CALIFORNIA (USA)
Penumbra’s ACE Reperfusion Catheters (ACE68 and ACE60) are intended for use in the revascularization of patients with acute ischemic stroke secondary to large vessel occlusion. The ACE catheter design further increases the distal and proximal lumen sizes, providing optimal trackability and even greater aspiration power. ACE68 is designed to easily navigate tortuous vessels to facilitate ...
Manufactured by:DAF Trucks N.V. based inNG Geldrop, NETHERLANDS
Regional, national or international transport. Smooth roads or rough terrain. It’s all the same to the Euro 5 DAF CF series, available either as tractor or rigid chassis in two, three or four axle ...
Manufactured by:Penumbra, Inc. based inAlameda, CALIFORNIA (USA)
The Penumbra JET™ D Reperfusion Catheter is intended for use in the revascularization of patients with acute ischemic stroke secondary to large vessel occlusion. The Penumbra JET D is designed to navigate smaller, distal vessels and extract clot efficiently with the power of the Penumbra ENGINE™ aspiration ...
Manufactured by:Penumbra, Inc. based inAlameda, CALIFORNIA (USA)
The Penumbra JET 7 Reperfusion Catheter is intended for use in the revascularization of patients with acute ischemic stroke secondary to large vessel occlusion. The larger lumen of Penumbra JET 7, powered by Penumbra ENGINE®, is designed to increase thrombus removal force. The Penumbra JET 7 allows for the combined use with the 3D Revascularization Device™, which offers four ...
by:Clinisys, Inc. based inTucson, ARIZONA (USA)
With Clinisys DaVinci for pathology departments can optimise pathology processes and work more efficiently and collaboratively. It’s a user-friendly, comprehensive solution providing advanced business intelligence and reporting that increases the efficiency of routine tasks and complex workflows, such as anatomical pathology and digital ...
Manufactured by:Rimec S.R.L. based inRioveggio (BO), ITALY
Fisiotek 3000 N model uses flexion-extension movement to allow mobilisation of the knee and hip. The asymmetric frame structure permits anatomically correct movement: placement is made according to the patient’s limb length, measured from the greater trochanter to the lateral malleolus. Additionally, an accessory for limbs less than 72 cm in length is available to provide rehabilitation ...
by:Agaram Technologies based inChennai, INDIA
Interfacer middleware for Invitro diagnostic device interfacing. Interfacer is a configurable middleware for interfacing clinical diagnostic ...
Manufactured by:NDD Medical Technologies based inAndover, MASSACHUSETTS (USA)
For those searching for a fully-integrated PC-driven spirometer, the Easy on-PC is a clinically proven solution. The Easy-on PC leverages our trusted TrueFlow™ technology that delivers unprecedented accuracy and reliable results without needing calibration. Real-time graphs and animated incentive screens enhance the user experience, encouraging child and adult patients to help them achieve ...
Manufactured by:Rimec S.R.L. based inRioveggio (BO), ITALY
Fisiotek 3000 G model uses flexion-extension movement to allow mobilisation of the knee and hip. The movement of the device is based on the correct adjustment of the length of the patient’s femur, which is necessary for the positioning of the limb. The device is light-weight, only 9.5 kg, to ensure the greatest manoeuvrability during use. Limbs with a length relative to the patient’s ...
Manufactured by:Rimec S.R.L. based inRioveggio (BO), ITALY
Fisiotek 3000 E model uses flexion-extension movement to allow mobilisation of the knee and hip. The movement of the device is based on the correct adjustment of the length of the patient’s femur, which is necessary for the positioning of the limb. The device is light-weight, only 9.5 kg, to ensure the greatest manoeuvrability during use. Limbs with a length relative to the patient’s ...
by:NEC OncoImmunity AS based inOslo, NORWAY
Recent advances in the field of immuno-oncology have established that mutated antigens (neoantigens), are viable targets of the immune system, potentially specific to each individual cancer patient. This plus many other breakthroughs in immuno-oncology and the rapid advances in next generation sequencing (NGS), opens up exciting new opportunities to harness neoantigens for their therapeutic and ...
Manufactured by:NDD Medical Technologies based inAndover, MASSACHUSETTS (USA)
EasyOne Air is a flexible, accurate and proven spirometry solution designed for healthcare providers large and small. Utilizing TrueFlow™ technology, this portable spirometer delivers reliable results without the need for calibration to ensure lifetime worry-free operation. Thanks to the vivid color touch screen, it is easy to navigate, view real-time results and enter ...
Manufactured by:Rimec S.R.L. based inRioveggio (BO), ITALY
Fisiotek 3000 GS model uses flexion-extension movement to allow mobilisation of the knee and hip. The movement of the device is based on the correct adjustment of the length of the patient’s femur, which is necessary for the positioning of the limb.The device is light-weight, only 9.5 kg, to ensure the greatest manoeuvrability during use. Limbs with a length relative to the patient’s ...
Manufactured by:Rimec S.R.L. based inRioveggio (BO), ITALY
Fisiotek 3000 TS model permits mobilisation of the knee andhip joints by means of flexion-extension movement, and of the ankle by means ofplantar flexion and dorsiflexion: this distinctive feature makes the device unique on the market in terms of the features offered. All of the device’s programmable functions are available for both the hip and knee joints, and for the ankle joint. The ...
Manufactured by:Penumbra, Inc. based inAlameda, CALIFORNIA (USA)
Penumbra’s Indigo Aspiration System can be used to remove emboli and thrombi from vessels of the peripheral arterial and venous systems, and for treatment of pulmonary embolism. A minimally-invasive device, Indigo enables the restoration of blood flow in such cases as acute limb ischemia and venous thrombus. The Indigo System utilizes the Penumbra ENGINE® aspiration source capable of ...